For fixed installations where ruggedised connections are not required, the BL II Bridge also offers 256 channels of 96 kHz audio between a Live console and a Dante network by utilising SSL’s proprietary high bandwidth Blacklight II protocol.
For fixed installations where ruggedised connections are not required, the BL II Bridge also offers 256 channels of 96 kHz audio between a Live console and a Dante network by utilising SSL’s proprietary high bandwidth Blacklight II protocol.
For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel.
For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel. On the rear panel there are two redundant pairs of Neutrik etherCON format Dante connections for audio and control distribution. Up to eight SB 32.24 stageboxes can now be connected via a pair of network switches to a single X-Light Bridge redundantly at 96 kHz with gain control of each input. There are no big workflow changes either! X-Light Bridge provides a seamless I/O boost for the user, as the routing process in the console interface is exactly the same via the X-Light Bridge as it is via the existing local Dante Expander Module. This includes the ability to configure the X-Light channel capacity as Virtual Tie Lines, for routing in Dante Controller, or as Dual Domain Routes for seamless routing and control from console channels.
AVN-AIO8 is a multi-channel Dante® Audio interface, which provides 8 balanced analogue inputs and outputs to and from the Dante network.
AVN-AIO8 is a multi-channel Dante® Audio interface, which provides 8 balanced analogue inputs and outputs to and from the Dante network. Simple to configure and operate, these cost effective rack-mount solutions offer an easy solution for AV professionals and system integrators. Packaged in a 1U form factor, they use Neutrik XLR connectors, are Dante® AES67 compliant and use PoE for power.
AVN-AIO4 is a multi-channel Dante® Audio interface, which provides 4 balanced analogue inputs and outputs to and from the Dante network.
AVN-AIO4 is a multi-channel Dante® Audio interface, which provides 4 balanced analogue inputs and outputs to and from the Dante network. Simple to configure and operate, these cost effective rack-mount solutions offer an easy solution for AV professionals and system integrators. Packaged in a 1U form factor, they use Neutrik XLR connectors, are Dante® AES67 compliant and use PoE for power.
TF-RACK is a compact rack-mount version of the TF Series digital mixing consoles, offering the same levels of performance and groundbreaking operability.
TF-RACK is a compact rack-mount version of the TF Series digital mixing consoles, offering the same levels of performance and groundbreaking operability.
ERIS ONE is a Dante audio interface which provides the user with a high performance, low latency and uncompressed digital audio networking.
ERIS ONE is a Dante audio interface which provides the user with a high performance, low latency and uncompressed digital audio networking. The equipment offered standard multipurpose I/O commonly used in the professional audio environment. Eris Ons is versatility, scalable architecture and high-performances it can be fully used in the most demanding recording studios, live music, audiovisual installations and broadcast environments.
It is designed to be used quite independently, all the ERIS ONE functionality is accessible through an easy and intuitive interface or operated remotely. As a system, it offers the user scalability to adapt its necessities through IOX extensions, allowing to increase I/O capacity in a modular way.
The internal and external elements are placed to achieve the peak heat dissipation without the need for forced ventilation. This characteristic gives the longest possible life and most reliable machine. In addition to this, it makes it less vulnerable to dust contaminants and humidity conditions..
The compound audio processor that according to its application lets the user choose and upload the wanted audio effects. All this leads to an efficient, strong and adaptive system.
The conversion system possesses programmable oscillators which enable us to provide our users the highest accuracy and digitally conversion quality in each sample without having to rely on temperature settings.
The ERIS ONE front panel, is fully machined as a single piece of aluminum. Silicone backlit buttons, the metallic controls and the chassis in a U position confers a robust and long life-span equipment.
Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.
Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.
Titan offers eight analogue recording channels, eight monitoring outputs, stereo digital input and output on a phono connector plus concurrent optical digital I/O ports that can interface to S/PDIF or ADAT data formats, giving Titan a maximum capability of 18 concurrent input and output channels plus stereo headphones.
Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.
Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.
Atlas offers eight analogue recording channels, eight monitoring outputs, stereo digital input and output on a phono connector plus concurrent optical digital I/O ports that can interface to S/PDIF or ADAT data formats, giving Atlas a maximum capability of 18 concurrent input and output channels plus stereo headphones.
The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology.
The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology.
Analog sources can be connected to the unit and then output in the digital domain by way of a Dante interface. Digital audio signals, which also arrive by way of Dante, are converted to analog and then output as balanced line-level signals. For application flexibility and troubleshooting a configuration choice allows other audio signals to be selected as the sources for the analog output channels. The Model 5412 is available in two versions – one with 8 input and 8 output channels and the other with 16 input and 16 output channels.
Key Features
Two versions available: 8 or 16 input and output channels
Analog line-level inputs to Dante outputs
Dante inputs to analog line-level outputs
Three Gigabit Ethernet interfaces
Standard connectors
Excellent audio quality
AC mains and 12 volt DC powering
Lightweight enclosure, single rack-space (1U) mounting
The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612. A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located. It even supports SFP network modules for application that require a long run back to the equipment room.
Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate. That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense.
The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612. A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located. It even supports SFP network modules for application that require a long run back to the equipment room.
The VP32K is a paging station kit that allows you to create customized paging consoles with up to 32-zones of control. This kit is designed to mount on a standard DIN rail inside the console and comes with a microphone, microphone clip, and panel-mount XLR harness.
Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate. That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense.
The VP32K is a paging station kit that allows you to create customized paging consoles with up to 32-zones of control. This kit is designed to mount on a standard DIN rail inside the console and comes with a microphone, microphone clip, and panel-mount XLR harness.
A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located. It even supports SFP network modules for application that require a long run back to the equipment room.
The VP4X station is an off-the-shelf 4-zone paging station that’s designed to fit in a standard 4-gang box. A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located. It even supports SFP network modules for application that require a long run back to the equipment room
Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate. That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense.
The VP4X station is an off-the-shelf 4-zone paging station that’s designed to fit in a standard 4-gang box. A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located. It even supports SFP network modules for application that require a long run back to the equipment room
The VP16K is a paging station kit that allows you to create customized paging consoles with up to 16-zones of control. This kit is designed to mount on a standard DIN rail inside the console and comes with a panel-mount 5-pin XLR harness to interface to a microphone. The included IOBB interface allows the station to connect to up to 16-buttons and indicator LEDs.
Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate. That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense.
The VP16K is a paging station kit that allows you to create customized paging consoles with up to 16-zones of control. This kit is designed to mount on a standard DIN rail inside the console and comes with a panel-mount 5-pin XLR harness to interface to a microphone. The included IOBB interface allows the station to connect to up to 16-buttons and indicator LEDs.
The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control. This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob.
Alcorn McBride believe that intercom solutions should be a breeze to install and intuitive to operate. Just like their popular V-Page product line, they have designed their V-Com solutions to leverage industry-standard DSP platforms like Q-SYS while providing a simple button-based UI that just makes sense.
The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control. This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob.
A single Ethernet cable provides network audio (Dante or AES67), power (PoE), and control between each V-Com station and the DSP device. It even supports SFP network modules for applications that require the station to be far away from the equipment room.
The perfect way to connect to Dante networks. Dual-redundant ports give access to a total of 64 Dante streams.
This interface card is used with Lawo's Power Core and Power Core RP.
The perfect way to connect to Dante networks. Dual-redundant ports give access to a total of 64 Dante streams.
This interface card is used with Lawo's Power Core and Power Core RP.
The Power Core RP is a fully featured Remote Production solution for mc² audio consoles with integrated modular I/O, DSP and IP streaming capabilities
The Power Core RP is a fully featured Remote Production solution for mc² audio consoles with integrated modular I/O, DSP and IP streaming capabilities.
Power Core RP combines modular audio I/O and high-density DSP processing functionality into a WAN-capable IP node. The unit’s ST2022-7 network redundancy and its Class-C jitter/network latency robustness eliminate the need for dedicated WAN-gateways from 3rd party suppliers and thus reduces the set-up complexity of remote productions, plus it reduces potential single points of failure. The unit’s comprehensive audio connectivity includes two redundant 1GbE SFP ports for AoIP, four MADI ports plus eight modular I/O slots which can be filled with a mix of Mic/Line, AES3, MADI or DANTE cards. Even a studio card with Mic/Line in/out and two headphone amplifiers is available.
Power Core RP ’s DSP capabilities include 48 fully featured processing channels and provide low-latency on-site monitor and IFB mixing. mc2 consoles at home have full control of all relevant channel parameters (gain, fader, mute, EQ, dynamics, Aux Send Level…) of the DSP node at the remote location. A touch-screen optimized control GUI provides additional control for on-site and remote operation.
The Power Core RP is standards-based and natively supports ST2110-30/-31, AES67 and RAVENNA AoIP networking. The unit is the perfect mate for Lawo’s video contribution solution V__remote4, which provides WAN-capable bi-directional signal transport for 4K/3G/HD/SD-SDI video signals plus a comprehensive set of onboard video processing features.
Power Core has an amazing amount of HD MADI and AES67 I/O on the front panel. 384 stereo channels, to be exact. And there’s more around back: 8 expansion slots, ready for your choice of optional mic, line, AES3, MADI, Dante, and Studio I/O cards (details below). There’s even an internal routing matrix to keep it all organized.
Today’s broadcast facilities demand lots of I/O. Rack space too, because traditional gear often devours 3 or 4 RU to deliver a mere handful of inputs. Good thing you’ve got Power Core instead, with more than 300 channels of built-in I/O, and room to expand. Networked? Naturally, with AES67-standard AoIP. DSP, too: scores of channels to sweeten signals at a moment’s notice. All of this power in only 1RU? You might just need a smaller rack room.
Power Core has an amazing amount of HD MADI and AES67 I/O on the front panel. 384 stereo channels, to be exact. And there’s more around back: 8 expansion slots, ready for your choice of optional mic, line, AES3, MADI, Dante, and Studio I/O cards (details below). There’s even an internal routing matrix to keep it all organized.
The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis.
It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK includes built-in antenna distribution with powering for active antennas. Up to eight channels of audio from single or dual-channel receivers appear on both its XLR outputs and over Dante™ audio-over-Ethernet.
The Network I/O GPIO 32 is a bulk GPIO for System T devices across your network.
The Network I/O GPIO 32 is a bulk GPIO for System T devices across your network.
GPIO 32 provides bulk GPIO connections for interfacing with System T consoles and transporting GPIO across System T networks. It facilitates a variety of possibilities and applications for System T consoles, such as custom user key panels or complex Audio Follow Video setups. 32 GPIs and 32 GPOs are available from the 2U unit. GPIO 32 maintains the solid design and redundancy features found on the rest of the Network I/O range: redundant PSUs and redundant Dante network connections come as standard. When coupled with System T’s powerful Event Manager, GPIO 32 has endless possibilities for custom console functions and external triggers. GPIO 32 can be controlled from all variants of System T control surface (S500, S300, TCR, remote T-SOLSA) running V2.0 (or later) software.
The A32 provides SSL SuperAnalogueTM I/O to Dante and AES 67 based IP networks.
The A32 provides SSL SuperAnalogueTM I/O to Dante and AES 67 based IP networks. A32 includes redundant network connections* and PSUs. It features 32 line inputs and 32 line outputs.
The A16.D16 provides a combination of SSL SuperAnalogueTM and AES3 digital I/O to Dante, AES 67 based IP networks.
The A16.D16 provides a combination of SSL SuperAnalogueTM and AES3 digital I/O to Dante, AES 67 based IP networks. A16.D16 includes redundant network connections* and PSUs. It features 16 line inputs - four of which also have switchable mic circuits, 16 line outputs and 16 digital I/O in 8 AES3 pairs. There are four GPIO.
TalkShow VS 4000 is the professional, multi-channel video calling system designed to simultaneously connect you with up to 4 remote guests—regardless of location—in real time and deliver distraction-free, broadcast-quality HD content with complete production control.
TalkShow VS 4000 is the professional, multi-channel video calling system designed to simultaneously connect you with up to 4 remote guests—regardless of location—in real time and deliver distraction-free, broadcast-quality HD content with complete production control.
Digimedia AMP DC is a professional 2 channel Dante interface with analog amplifier output. There is Dante Domain Manager and AES67 support build in. Audio output power can be up to 2x20W. Interface needs 12V or external PoE (Power over Ethernet) splitter. Digimedia AMP DC has professional industrial Phoenix Contact connector for the loudspeakers.
Digimedia AMP DC is a professional 2 channel Dante interface with analog amplifier output. There is Dante Domain Manager and AES67 support build in. Audio output power can be up to 2x20W. Interface needs 12V or external PoE (Power over Ethernet) splitter. Digimedia AMP DC has professional industrial Phoenix Contact connector for the loudspeakers.
Digimedia DIO XLR DC is a professional high-end studio-grade 2 channel Dante™ interface with digital AES-3 XLR input and output. Input has high quality SRC with typical SN 144dB. There is Dante Domain Manager and AES67 support build in. Interface needs 12V or external PoE (Power over Ethernet) splitter. Two professional high quality Neutrik XLR audio connectors.
Digimedia DIO XLR DC is a professional high-end studio-grade 2 channel Dante™ interface with digital AES-3 XLR input and output. Input has high quality SRC with typical SN 144dB. There is Dante Domain Manager and AES67 support build in. Interface needs 12V or external PoE (Power over Ethernet) splitter. Two professional high quality Neutrik XLR audio connectors.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
