Dante-enabled Product Catalog
The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®.
The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®. The Dante network card is installed into the digital expansion slot of the processor and includes primary and secondary Gigabit Ethernet ports that can be configured for switched (default), redundant, isolated or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
The Digital Audio Labs Livemix LM-Dante-EXP allows the Livemix Personal Mixer to integrate seamlessly with a Dante audio network as part of the Livemix Personal Monitoring System.
The DigiCo SD-Dante-8 Module offers 8 input and 8 output channels when added to DigiGo SD racks, including the SD-Rack, SD-Mini Rack, and SD-Nano Rack. These racks support DiGiGo's SD consoles including the various versions of the SD5, SD7, SD8, SD9, SD10 and SD11 consoles.
- Dante Ch: 8x8
- 48kHz-96kHz
The Studer D21m Dante card is a 64 x 64 interface between a Studer Vista or OnAir console (OnAir support with OnAir SW v6.1) and any Dante compatible device from HARMAN or other 3rd party manufacturers.
The Studer D21m DanteTM card needs a double slot in the D21m frame which is connected to the console’s core. This makes a Studer console a part of a Dante network.
Dante® Digital Interface For Ashly equipment (Factory Installed)
The Dante Accelerator audio interface card (Yamaha AIC 128-D) can be installed in the computer running the Nuendo DAW to provide extra low-latency transfer of as many as 128 simultaneous channels of audio data, for a distinct performance advantage when communicating with Nuage I/O units.
The Dante Accelerator audio interface card (Yamaha AIC 128-D) can be installed in the computer running the Nuendo DAW to provide extra low-latency transfer of as many as 128 simultaneous channels of audio data, for a distinct performance advantage when communicating with Nuage I/O units. The Dante Accelerator card also features a secondary port that can be used to provide redundant connections for failsafe reliability.
Where to Buy: Yamaha Dante Accelerator AIC128-D PCIe-R Card
The KT-DANTE64 Network Module is a groundbreaking, Ethernet compliant audio networking module, compatible with the KLARK TEKNIK DN9650 and DN9652 Network Bridges.
- Dante Ch: 64x64
- 16-bit, 24-bit, 32-bit
The Dante-enabled DAN-1 digital server networking card functions as a gateway interface to support 64x64 channels of Dante networked audio.
The CDN64 Dante™ Audio Bridge Card provides third-party Dante enabled digital audio products the ability to integrate into the Q-SYS Ecosystem. It provides a bridge for up to 64 x 64 channels of Dante audio into the Q-SYS Ecosystem for advanced processing redistribution over larger LAN and WAN IT infrastructures.
The X32's expansion slot provides flexible and expandable connectivity for many different applications. The X-DANTE Expansion Card can easily be installed in place of the X-USB card that is included with the
X32. The 32-channel 48 kHz bi-directional audio interface brings even more I/O options to the X32 by making it ready for integration with Dante-enabled IP networks.
cyberTEQ – m Dante to 4xAES3 out - module is a roadworthy distribution system that uses IEEE 802.3 Gigabit-Ethernet as a backbone. The system can be used to build large production networks over huge distances by using fibre optical cables to transmit simultaneously nearly all signals used in the event technology.
The audio routing system Nexus can be equipped with a new Dante™ interface module board named XDIP which connects Nexus to IP networks running Audinate’s Dante™. The card is equipped with sampling rate converters on all 64 inputs and outputs. The integrated Ethernet switch offers 4 ports and is AVB-ready.
The
fully digital Nexus is one of most versatile audio network and routing systems on the market today and is a core product of Stage Tec, the Berlin manufacturer of professional audio mixing consoles and routers. Nexus and the router node Nexus Star are also hosts to the audio processing of Stage Tec mixing consoles such as Aurus and Crescendo.
By adding option cards to the Soundcraft Si range of digital consoles, you can interface your desk with a multitude of digital systems.
The Si range of consoles features a versatile 128 channel expansion bus offering 64 discrete additional input sources and 64 additional output patches that may be used in parallel to fan-out to multiple destinations.
Routing from the cards to the processing channels and from channels or buses to the option card buses is achieved via the ‘Patching’ functionality.
The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor. With an RCM-28 module installed, a Tour Grade amplifier’s network and system parameters can be completely supervised and controlled remotely through IRIS-Net.
The RCM-28 remote control module is the first EV product to support the new OMNEO media networking architecture. Tour Grade series amplifiers (such as the TG5 and TG7) with RCM-28 modules installed can be integrated into OMNEO networks of up to 100 other devices that operate over standard Ethernet with standardized protocols.
The KDL-16 is a plug in module for the SAS 32KD Digital Audio Network. The module utilizes Dante to provide 32 channels of bi-directional Audio over IP.
This card fits into the standard slots of the RTS ADAM or ADAM-M frames and provides a gateway to the world of OMNEO IP-compatible networking. The card consists of the traditional ADAM front and back card components.
- Dante Ch: 64x64
- AES67 Enabled
The OKI keypanel interface cards fit into select RTS user stations and provide native OMNEO IP connectivity for RJ45 Ethernet connections into the OMNEO network with optional single or multimode fiber modules.
The NXDT104 card allows NEXO NX amplifiers to interface with a Dante network. This allows for a NEXO loudspeaker system to talk directly to a Yamaha CL mixing console via Dante.
[Discontinued] For situations in which low-latency performance is critical, such as tracking, the RedNet PCIe card provides the best possible performance for your system. This dedicated card fits into a Windows or Mac computer standard PCIe card slot or with a laptop using a Thunderbolt PCIe Chassis. It delivers up to 128 channels I/O with under 3ms latency dependending on ASIO/Core Audio buffer size. A standard RJ45 Gigabit Ethernet connector links your audio computer to the rest of the network via a GigE switch.
The oratis IF Dante module supports up to 64 bidirectional audio channels. It is fully compatible with Dante’s unique plug and play network integration with automatic device discovery and system configuration. The Ethernet switch incorporated on DELEC’s Dante board is one of the few on the market which already supports the IEEE 802.1BA AVB standard. Each IF Dante board is equipped with four Ethernet ports.
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
- Dante Ch: 64x64
- 24-bit, 32-bit
M-Dante is one of a range of digital audio networking options available for iLive, GLD and ME-U to enable integration with other systems, digital mic splitting, multi-track recording and system expansion. Is is also compatible with Avantis and dLive when fitted with the M-DL-ADAPT adapter frame.
The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module.
The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module. The transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency is possible with the OM‑1.
- Gigabit Ethernet Interface - 1000 Mbit/s full-duplex Ethernet Interface, IEEE 802.3u compatible
- Secondary Gigabit Ethernet Interface - Second Ethernet Interface for the connection of a redundant network to establish fault-tolerant systems
- Status LEDs - Link, Activity and Gigabit active status indication for each Ethernet interface
