Biamp – Tesira DAN-1


More details

Similar Products

MDT44-E2|IMG_2662
  • Kingray

Kingray – MDT44-E2

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

    Dante Interface Cards
MNS-AMPMC230POE
  • MONISMS

MONISMS – MNS-AMPMC230POE

The POE DANTE/AES67 Audio Amplifier module MNS-AMPMC230POE, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers. The POE DANTE/AES67 Audio Amplifier module MNS-AMPMC230POE, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers. The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers. The MONISMS Dante Amplifier has two outputs, each with 15W of power into an 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers. The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP230POE is powered by standard POE+ and has a MAX power of 30 watts [2*15W]. If there is not  POE+  used,  It can used the external 24VDC power supply.
    Dante Interface Cards
danteeventideexpansion
  • Eventide

Eventide – Dante Expansion card

Audinate Brooklyn II Dante Module based design

32 In / 32 Out operation at all supported H9000 sample rates

Sample Rate Clock Sources: Brooklyn II Module, Dante network, H9000

AES67 Support

Either 2 Primary and 2 Redundant Networks Connections or 4 Primary Network Connections

Can reside in any H9000 Option Slot

    Dante Interface Cards