Yamaha – HY144-D-SRC


More details

Similar Products

OPT-AoIP-iVAM_r
  • Wohler

Wohler – OPT-RAVENNA 64 (iVAM)

This optional hardware card card enables monitoring from a 64 channel Ravenna / AES67 Input. Includes NMOS support. It ships with an activation key and is plug and play. It Includes an AoIP card enabling primary and secondary RJ-45 for hitless/2022-7 support (for Dante, Ravenna and 2110-30 signals). Also included is an optical TOSLINK input and a Gigabit SFP cage allowing multi-mode and single mode network SFP’s for AoIP Signals.

The option card can be installed in the i-Series products listed below:

iVAM1-1

iVAM1-3

iVAM2-2

IAM-AUDIO-1

IAM-AUDIO-2-PLUS

    Dante Interface Cards
  • Dante Ch: 64x0
  • AES67 Enabled
MDT44-E2
  • Kingray

Kingray – MDT44_E2

  • 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO
  • 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,
  • I2S digital audio format
  • Freely set the sampling rate and equipment name
  • Network audio transmission and control use standard Category 5 network cable (CAT5) by 2*RJ45
  • Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats
    Dante Interface Cards
  • Sonifex

AVN-AIO8-DNT

Designed for broadcast, live production, and professional AV environments, the AVN-AIO8-DNT provides a cost-effective and dependable solution for transporting low-latency audio between analogue and Dante network domains.
  • Dante AoIP.
  • 8 x analogue inputs on Neutrik XLR.
  • 8 x analogue outputs on Neutrik XLR.
  • Accepts balanced and un-balanced analogue line signal.
  • Adjustable global 0dBFS line up selection (+12dBu/+18dBu/+24dBu).
  • Powered by PoE on either (or both) Ethernet ports, offering power supply redundancy.
  • Alternative USB-C DC power input, when PoE is unavailable.
  • 2 x RJ45 connector, (1Gb/s Ethernet Port), allowing the unit to operate in redundant or switched modes.
  • PoE and Link LED status indicators for each Ethernet port.
  • Rear-panel mount for single/top locking USB-C cables.
  • Rear-panel cable tie mount to provide strain relief.
  • Clock LED status indicator.
  • Configuration using Dante Controller.
  • AES67 operation & Dante Domain Manager compliant.
  • 1U 19″ rack-mount aluminium chassis.
    Dante Interface Cards
  • Dante Ch: 8x8
  • 16-bit, 24-bit, 32-bit