Cart
← Back to Product Catalog

Wohler – OPT-RAVENNA 64 (iVAM)

Dante Interface Cards

More details

Similar Products

musicrown-dms-dsp|musicrown-dms-dsp
  • Musicrown

Musicrown – DMS DSP

Musicrown's DMS DSP is a Dante interface card.  Musicrown's DMS DSP is a Dante interface card. 
  • 32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
  • 8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
  • DSP input channel including noise gate, gain, mute, phase, link adjustment.
  • DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
  • All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
  • All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
  • Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
  • Maximal delay time 680mS for all input/output channels.
  • Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
  • Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
  • 30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
  • PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
  • Module power supply mode is DC9V-12V 1A.
  • Module size is 100mmx66mmx40mm.
DMS Series:
  • DMS 2.0 - 2 analog input, 2 Dante output
  • DMS 0.2 - 2 analog output, 2 Dante input
  • DMS 2.2 - 2 analog input/output, 2 Dante input/output
  • DMS 4.0 - 4 analog input, 4 Dante output
  • DMS 0.4 - 4 analog output, 4 Dante input
  • DMS 4.4 - 4 analog input/output, 4 Dante input/output
    Dante Interface Cards
See the product
Studer-D21m-Dante-IO-card-top
  • Studer

Studer – D21m Dante I/O card

The Studer D21m Dante card is a 64 x 64 interface between a Studer Vista or OnAir con­sole (OnAir support with OnAir SW v6.1) and any Dante compatible device from HARMAN or other 3rd party manufacturers. The Studer D21m DanteTM card needs a double slot in the D21m frame which is connected to the console’s core. This makes a Studer console a part of a Dante network.
    Dante Interface Cards
  • Dante Ch: 64x64
  • 24-bit
See the product
OPT-AoIP-iVAM_r
  • Wohler

Wohler – OPT-DANTE (iVAM)

This optional hardware card card enables monitoring from a 64 channel Dante™ Input. It ships with an activation key and is plug and play. It Includes an AoIP card enabling primary and secondary RJ-45 for hitless/2022-7 support (for Dante, Ravenna and 2110-30 signals). Also included is an optical TOSLINK input and a Gigabit SFP cage allowing multi-mode and single mode network SFP’s for AoIP Signals.

    Dante Interface Cards
  • Dante Ch: 64 In
  • AES67 Enabled
See the product