Product Information
Dante® Digital Interface For Ashly equipment (Factory Installed)
Specifications
- Dante Ch: 2x2
- Bit Depth: 24-bit
- Sample Rate: 48kHz
- AES67 Enabled
Ashly – OPDante2
Similar Products
- Allen & Heath
Allen & Heath – Dante 64×64
The Dante 64x64 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 64 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features
- Dante Interface Cards
- Dante Ch: 64x64
- 24-bit
- Focusrite
Focusrite – RedNet PCIeR
RedNet PCIeR combines extremely low latency with Ethernet redundancy, offering the best possible system performance coupled with exceptional reliability.
RedNet PCIeR combines extremely low latency with Ethernet redundancy, offering the best possible system performance coupled with exceptional reliability. The card requires a standard PCIe slot in a Windows or Mac computer and delivers up to 128 channels I/O with under 3ms latency*. Dual RJ45 Gigabit Ethernet connectors switch automatically according to network availability and link the audio computer to the rest of the network.
Key Features and Performance
- Dual Ethernet ports for full redundancy
- 128 channels in and 128 channels out at 96kHz and below
- 64 channels in and 64 channels out at 176.4kHz and 192kHz
- Compatible with any Dante network
- Up to 192 kHz sample rate
- Under 3ms analogue-to-analogue round-trip latency through DAW with Focusrite RedNet A-D/D-A*
- ASIO and Core Audio drivers
- Thunderbolt PCIe chassis compatible
- Dante Interface Cards
- Dante Ch: 128x128
- 24-bit
- AtlasIED
AtlasIED – HPA-DAC2
The HPA-DAC2 is a Dante™ network audio card for use with high power HPA series amplifiers
The HPA-DAC2 is a Dante™ network audio card for use with high power HPA series amplifiers.Compatible with:
- Dante Interface Cards
- Dante Ch: 2x0
- 16-bit, 24-bit, 32-bit