Stage Tec - XDIP

Stage Tec – XDIP

Product Information

The audio routing system Nexus can be equipped with a new Dante™ interface module board named XDIP which connects Nexus to IP networks running Audinate’s Dante™. The card is equipped with sampling rate converters on all 64 inputs and outputs. The integrated Ethernet switch offers 4 ports and is AVB-ready.

The fully digital Nexus is one of most versatile audio network and routing systems on the market today and is a core product of Stage Tec, the Berlin manufacturer of professional audio mixing consoles and routers. Nexus and the router node Nexus Star are also hosts to the audio processing of Stage Tec mixing consoles such as Aurus and Crescendo.

Wohler – OPT-DANTE (12G)

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

Dante Interface Cards

Dante Ch: 64x0
AES67 Enabled

See the product

Prism Sound

Prism Sound – MDIO-Dante

The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network. The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network. With this setup, DANTE users can enjoy the excellent sound quality of both the Titan and Atlas A/D and D/A converters, and their equally well regarded on-board microphone preamplifiers. Titan was recently rated 'the pinnacle of USB recording' with 'fantastic converters and mic pre's' by John Gatski, of Everything Audio Network. Control of the Prism Sound Titan or Atlas units when connected to DANTE is easy. When connected over a network the units are controlled using a dedicated software app that is available for both Mac and Windows. This enables you to control the units from any computer on the network or via its dedicated USB port. The set up information can be stored for instant recall within the dedicated app unlike many third party interfaces whose settings cannot be recalled.

Dante Interface Cards

See the product

Allen & Heath

Allen & Heath – M-Dante Card

M-Dante is one of a range of digital audio networking options available for iLive, GLD and ME-U to enable integration with other systems, digital mic splitting, multi-track recording and system expansion. Is is also compatible with Avantis and dLive when fitted with the M-DL-ADAPT adapter frame.

Dante Interface Cards

Dante Ch: 64x64
24-bit

See the product

Stage Tec – XDIP

Product Information

Similar Products

Wohler – OPT-DANTE (12G)

Prism Sound – MDIO-Dante

Allen & Heath – M-Dante Card

Stay connected to Dante

Support

Company

Dante Networking Alliance