Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8250 is a 8-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.
The pema8250 is also available in these models:
pema 8250.25d - pema Network Power Amp 8 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card
pema 8250.70d - pema Network Power Amp 8 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card
pema 8250.10d - pema Network Power Amp 8 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card
2 Channel DSP-Enabled Amplifier 2 x 160W @ 70/100V
The FLX160-2-CV is a 2 channel, 70V/100V Network Enabled 1/2 rack amplifier delivering 160W per channel with built in DSP, RS232 control and Remote volume control.
Onboard DSP for signal routing, filtering, and bridging
Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8125 is a 8-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.
The pema8125d is also available in these models:
pema 8125.70d - pema Network Power Amp 8 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card
pema 8125.10d - pema Network Power Amp 8 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card
4 Channel DSP-Enabled Amplifier 4 x 80W @ 70/100V Dante™ Network Enabled
The FLX-E-80-4-CV-D is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-80-4-CV-D amplifier supports Dante™ audio.
Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4250 is a 4-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.
The pema4250d is also available in these models:
pema 4250.25d - pema Network Power Amp 4 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card
pema 4250.70d - pema Network Power Amp 4 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card
pema 4250.10d - pema Network Power Amp 4 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card
4 Channel DSP-Enabled Amplifier - 4 x 80W @ 4Ω Includes factory-installed Dante Card
The FLX80-4-LZ is a 4 channel, 4/8Ohm Network Enabled 1/2 rack amplifier delivering 80W per channel with built in DSP, RS232 control and Remote volume control.
Onboard DSP for signal routing, filtering, and bridging
Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4125 is a 4-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.
The pema4125d is also available in these models:
pema 4125.70d - pema Network Power Amp 4 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card
pema 4125.10d - pema Network Power Amp 4 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card
Networked 2 CH Amplifier - 100W x 2 @ 70.7V
The CVA100-2 amplifier is a network-enabled 2 channel constant voltage amplifier delivering 100W per channel at 70.7V.
The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel.
The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition
logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
Mono Networked Subcompact Amplifier - 50W x 1 @ 70V/100V
Mono constant voltage networked amplifier in a subcompact, 1/3 rack form factor. Includes both local and network inputs with priority switching.
The nXp3.02d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and
Clipping/Mute status per channel.
The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
The nXp1.54d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per
channel.
The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions shall include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
2 Channel Networked Subcompact Amplifier - 25W x 2 @ 8Ω
2 channel networked amplifier in a subcompact, 1/3 rack form factor. Includes both local and network inputs with priority switching.
The nXp1.52d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON.
The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
2 Channel Networked Subcompact Amplifier - 25W x 2 @ 8Ω
2 channel networked amplifier in a subcompact, 1/3 rack form factor. Includes two channels of networked amplification.
Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers. The ne8250bd offer 8-Channels @ 250W per channel with separate hi-z and lo-z models. NE offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. NE Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor.
The ne8250 series contains these additional models:
ne8250.25bd - Network Power Amplifier 8 x 250W @ 25V. Includes OPDante & OPDAC-8 Cards
ne8250.70bd - Network Power Amplifier 8 x 250W @ 70V. Includes OPDante & OPDAC-8 Cards
ne8250.10bd - Network Power Amplifier 8 x 250W @100V. Includes OPDante & OPDAC-8 Cards
ne8250ped - Network Power Amplifier 8 x 250W @ 4 Ohms w/Protea DSP. Includes OPDante & OPDAC-8 Cards
ne8250.25ped - Network Power Amplifier 8 x 250W @ 25V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
ne8250.70ped - Network Power Amplifier 8 x 250W @ 70V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
ne8250.10ped - Network Power Amplifier 8 x 250W @ 100V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
Powered Loudspeaker Management (PLM) has revolutionized live event audio with its seamless fusion of renowned Lake® processing with an amplifier platform based on the power density, sonic purity, and proven reliability of Lab.gruppen’s flagship FP+ Series.
The latest addition to the PLM Series is the two-input/four-output PLM 20000Q, producing prodigious power output of 5000 W per channel @ 2.2 – 3.3 ohms. PLM 20000Q now joins the PLM 14000 and thePLM 10000Q in an expanded PLM Series, offering users even more flexibility in re-configuring racks for power-hungry subwoofers, line arrays, or stage monitors. All PLM Series units also incorporate revolutionary load verification and performance monitoring features that assure extended reliability for all system components, loudspeakers included.
Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers. The ne4250bd offer 4-Channels @ 250W per channel with separate hi-z and lo-z models. NE offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. NE Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor.
There are an additional 7 models in the ne4250 series:
ne4250.25bd - Network Power Amplifier 4 x 250W @ 25V. Includes OPDante & OPDAC-4 Cards
ne4250.70bd - Network Power Amplifier 4 x 250W @ 70V. Includes OPDante & OPDAC-4 Cards
ne4250.10bd - Network Power Amplifier 4 x 250W @ 100V. Includes OPDante & OPDAC-4 Cards
ne4250ped - Network Power Amplifier 4 x 250W @ 4 Ohms w/Protea DSP. Includes OPDante & OPDAC-4 Cards
ne4250.25ped - Network Power Amplifier 4 x 250W @ 25V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
ne4250.70ped - Network Power Amplifier 4 x 250W @ 70V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
ne4250.10ped - Network Power Amplifier 4 x 250W @ 100V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency.
The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.
CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection).
A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use.
The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
The DNA7814 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.
The DNA7814 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifiers feature Audinate's Dante™ digital audio input and four channelsof 200 watt amplification. The DNA7814 amplifiers are controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM configuration utility or through the GLOBALCOM System Management Center.
The DNA7874 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.
The DNA7874 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifiers feature either CobraNet® or Audinates Dante™ digital audio input and four channelsof 200 watt amplification. The DNA7874 amplifiers are controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM configuration utility or through the GLOBALCOM System Management Center.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
