Product Information
The PLM 14000 extends the PLM Series with a two-input, two-output power platform optimized for high-power requirements, making it ideal for demanding subwoofer and low-end applications with loading down to 2 ohms.
The PLM 14000 extends the PLM Series with a two-input, two-output power platform optimized for high-power requirements, making it ideal for demanding subwoofer and low-end applications with loading down to 2 ohms.
Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.
The IPA 412 T is a professional, four-channel installation power amplifier with 4 x 120 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The versatile DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.
Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.
HPF/LPF presets can be enabled directly on the device via DIP switches The IPA 412 T is already equipped for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configuration and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 412 T into the Dante network and resolve more complex tasks.
Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.
The IPA 424 T variant with 4 x 240 watts is available for larger installations.
* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier
* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP
* KAP™ provides “Find-me” ping signal for easy location identification
* KAP™ tools can save and load the speaker profiles saving installation time & efforts
* Audio DSP provides up to 5 sets of PEQ setting for each channel
* One Rj45 connection for the Dante™ audio signals and PoE power network
* ED-004 supports both IEEE 802.11af/at (PoE/PoE+) and Local DC-In power input
* Supports Dante™ Domain Manger and AES67 compliant
* Auto detect PoE+ (30W) or PoE (15W) power levels
* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection
* 5 LED status display for PoE status and channel signal and peak