Cart
← Back to Product Catalog

Four Audio – PPA 1600

Amplifiers

More details

Similar Products

powersoft-ottovanali_base
  • Powersoft

Powersoft – Ottocanali 12K4 DSP+D

The Ottocanali 12K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 12,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems. As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption. With two redundant Dante by Audinate digital streams, the Ottocanali 12K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.
    Amplifiers
  • Dante Ch: 16x8
  • 24-bit
See the product
taiden-hpa-160d-02
  • Taiden

Taiden – HPA-160D/02

The HPA-160D/02 is a Digital audio power amplifier. Its a compact and efficient combination of digital power amplifier and switching power supply.

  • Class-D power amplifier with theoretical efficiency over 80%
  • Automatic adaptation to all mains voltages world-wide
  • Low-heat generation, long service life
  • Energy saving and cost efficient
  • Operation mode: Stereo/bridge
  • 2×SPEAKON socket for loudspeakers
  • TM 2×RJ45 jack for digital audio input via Dante networking
  • 1 Line In and 1 Line Out (Diameter 6.4 mm phone jack)
  • Embedded Web Server for power amplifier configuration (e.g. limiter, EQ and mix) and view of microphone on/off status
  • All-round protection from shortcut circuit, direct current and overheating, power supply overload or overheating control
    Amplifiers
See the product
stewart-audio-mc850
  • Stewart Audio

Stewart Audio – MC850-LZ-D

The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support. The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support. The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.       
  • 8 independent Dante™ inputs
  • Primary and Secondary Dante™ ports (redundant or switched)
  • Ethernet port for control and reporting
  • RS-232 control
  • Power sharing up to 125W per channel
  • Compact 1RU enclosure
  • Made in USA
    Amplifiers
See the product