Cart
← Back to Product Catalog

Ashly – ne1600

Amplifiers

More details

Similar Products

C10-2_Front_Web
  • Ampetronic

Ampetronic – C10-2 Dante

The C10-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
    Amplifiers
  • AES67 Enabled
See the product
atlasied-dpa804_1200px|atlasied-dpa804_1200px
  • AtlasIED

AtlasIED – DPA804

The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity.  However, the DPA804 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications.The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.
    Amplifiers
  • Dante Ch: 4 In
See the product
mc2-audio-delta-100_1200px
  • MC2 Audio

MC2 Audio – Delta 40

Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product