Dante-enabled Product Catalog
Features:
- nXp Series available in either 2 or 4-channel models.
- Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation.
- When in Sleep Mode, the nX amplifiers draw less than 1 Watt.
- They are the networkable version of the nX amplifier with the addition of Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability.
- Has 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking.
- Precision load impedance monitoring on each amplifier channel output. All controlled using our proprietary Protea™ Software Suite.
- Dante Ch: 0x2
- 48kHz-96kHz
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
- Dante Ch: 32x32
- 16-bit, 24-bit, 32-bit
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis.
Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs.
Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
PA−150NET is a high−performance amplifier with both Dante™ and local inputs.
PA−150NET is a high−performance amplifier with both Dante™ and local inputs. This amplifier is built to power demanding professional and commercial audio installations that use the Dante digital media transport system. Its dual−input capability with its priority switch makes this amplifier a versatile and handy tool for many applications.
- Inputs - Dante network source, balanced line level mono audio.
- Outputs - 70V/100V speaker, unbalanced line level mono audio.
- Output Power - 50W into one channel.
- Controls - Line Level and remote volume/mute.
- Priority Setting Switch - Net or local.
- Auto Standby.
- Safety - Conforms with UL 2043 heat and smoke release for plenum−rated environments.
- Size - Compact TOOLS - Part of the Kramer TOOLS Family of compact high-quality and cost-effective solutions.
PA−225NET is a high−performance amplifier with both Dante™ and local inputs.
PA−225NET is a high−performance amplifier with both Dante™ and local inputs. Its dual−input capability with its priority switch makes this amplifier a versatile and handy tool for many applications.
- Inputs - Dante network source, 2 balanced line level stereo audio.
- Outputs - Unbalanced line level stereo audio, speakers.
- Output Power - 2 x 35W @4Ω, 2 x 25W @8Ω.
- Controls - Line Level and remote volume/mute.
- Priority Setting Switch - Net or local.
- Auto Standby.
- Safety - Conforms with UL 2043 heat and smoke release for plenum−rated environments.
- Size - Compact TOOLS - Part of the Kramer TOOLS Family of compact high-quality and cost-effective solutions.
The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels.
The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel.
The KA24 is usable as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector. The KA24 features optical limiters an protection against over temperature, over current and short circuits.
- Dante Ch: 2x0
- 48kHz-96kHz
The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors.
The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors.
The KA84 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
An onboard library preset with K-array speaker gives an optimal and easy configuration for endless combinations. All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector.
- Dante Ch: 0x2
- 48kHz-96kHz
Designed for the professional audio market, the LD Systems® DSP 44 K power amp was developed in cooperation with Ram Audio, whose products are sold in many countries by Adam Hall Group.
Designed for the professional audio market, the LD Systems® DSP 44 K power amp was developed in cooperation with Ram Audio, whose products are sold in many countries by Adam Hall Group. This new powerhouse features a fully-integrated DANTE™ network, a high-performance DSP and controllability via USB and Ethernet using external control PC software.
The top-of-the-line power amp can be operated as a two or four-channel device. An impressive four kilowatts provide plenty of power reserves as 4 x 1,000 watts at 4 or 2 ohms or 2 x 2,000 watts (bridge mode) at 8 or 4 ohms. Maximum operational reliability is also guaranteed at 2 ohms. Comprehensive safety features permanently protect the power amps and the system, even in tough situations. FIR/IIR filtering, EQs and crossovers, as well as delay functions, are all part of the overall technology.
The Personal PA 457 NET D PRO features the cutting-edge PPA T45NET transmitter, with control/monitoring capability from any remote location, multiple digital audio input options, Dante Input, and an OLED display with easy-to-manage menu navigation. Features three powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound. With an operating range of up to 1000 feet, the PPA 457 NET D PRO is ideal for large venues where superior coverage is essential. This complete turnkey solution includes four PPA R37 receivers, each featuring seek-button channel selection with access to 17 pre-set wideband frequencies between 72-76 MHz. Includes a coaxial cable and rack panel kit for professional installation. The system is expandable, accommodating any number of listeners. This system complies with 2010 ADA guidelines for hearing assistance and is covered by Lifetime PLUS Limited Warranty.
System includes
(1) PPA T45 NET D Transmitter
(4) PPA R37 Receivers
(2) NKL 001 Neckloops
(4) EAR 013 Single Mini Earbuds
(1) ANT 025 Whip Antenna
(1) TFP 048 Power Supply
(1) WLC 004 Main Power Cord (U.S.)
(1) WCA 013 RCA Audio Cable, 3ft.
(4) BAT 001-2 AA Alkaline Batteries
(1) IDP 008 Wall Plaque
(1) ANT 005 Coaxial Antenna
(1) RPK 005 Rack Panel Kit
Optional 17-channel receiver (PPA R38) is available for multi-channel applications.
Large-area, 48-volt induction loop system with network control, and installation wire and tape. Large-area system offers flexible, powerful software control of mixing, equalization, compression and phase shift. Potent, class D, pulse-width amplifiers maximize efficiency and reduce size and weight. Dual-amplifier design offers the option of a single 12A output for large perimeter loops or dual 10A outputs for phase loop arrays. Dante Input.
Large-area, 48-volt induction loop system with network control, and installation wire and tape. Large-area system offers flexible, powerful software control of mixing, equalization, compression and phase shift. Potent, class D, pulse-width amplifiers maximize efficiency and reduce size and weight. Dual-amplifier design offers the option of a single 12A output for large perimeter loops or dual 10A outputs for phase loop arrays. Dante Input.
System includes
(1) DL210 NET D 2.0 induction loop amplifier
(2) PLR BP1 body-pack receivers with batteries
(2) EAR 022 surround earphones
(1) BAT KT6 Dual Drop-in Charger Kit (includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH batteries)
(2) PLW F500 500 ft. rolls of flat power loop wire
(6) FWT 001 rolls of flat wire warning tape
(1) IDP 009 ADA Wall Plaque (T-Coil)
5-year Warranty on amplifier
3500 W per channel power amplifier.
3500 W per channel power amplifier.
- High-power performance for top-level tours
- Rugged, lightweight package
- 3500 W per channel (2 Ω)
- Grounded Bridge Class-H design
- Switch-mode power supply
- Microprocessor-controlled
- Front LCD panel for operation-mode setup and monitoring
- Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
- 11-level protection package
- Only 32 lbs (14.5 kg)
2000 W per channel power amplifier.
2000 W per channel power amplifier.
- High-level touring performance
- Rugged, lightweight package
- 2000 W per channel (2 Ω)
- Grounded Bridge Class-H design
- Switch-mode power supply
- Microprocessor-controlled
- Front LCD panel for operation-mode setup and monitoring
- Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
- 11-level protection package
- Only 31.4 lbs (14.2 kg)
Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms).
Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). The DTDAMP partners perfectly with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure – either in a ‘dry hire’ application where the user has limited knowledge, or in a fixed installation such as a bar or club.
Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms).
Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). The DTDAMP partners perfectly with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure – either in a ‘dry hire’ application where the user has limited knowledge, or in a fixed installation such as a bar or club.
The MA32 series is a multichannel power amplifier platform featuring the worlds highest channel density in small enclosures. Despite it's compact construction in only 2 rack units, the amplifier delivers a maximum burst power of about 9,000W distributed over 32 channels with 280W each.
The MA32 series is a multichannel power amplifier platform featuring the worlds highest channel density in small enclosures. Despite it's compact construction in only 2 rack units, the amplifier delivers a maximum burst power of about 9,000W distributed over 32 channels with 280W each. Besides DSP features like IIR-Filters, limiters and delays, it also features 2048 Tap FIR Filters per channel. The integrated webserver and TFT display offers the user an intuitive function overview and easy configuration possibility. To provide high reliability and easy maintenance for project installations, the MA32 series features also a Pilot Tone monitoring for each connected speaker. Audio Inputs can be Dante™ (redundant), MADI / AES10 (1x optical, 2x coaxial redundant) and AES3id which can easily be assigned to any of the desired output channels. With the MA32 series we provide the key for cost effective and space-saving 3D-sound installations, live surround sound applications as well as high channel count research projects.
- Dante Ch: 32x0
- AES67 Enabled
The MA32 series is a multichannel power amplifier platform featuring the worlds highest channel density in small enclosures. Despite it's compact construction in only one rack unit, the amplifier delivers a maximum burst power of about 640W distributed over 32 channels with 20W each.
The MA32 series is a multichannel power amplifier platform featuring the worlds highest channel density in small enclosures. Despite it's compact construction in only one rack unit, the amplifier delivers a maximum burst power of about 640W distributed over 32 channels with 20W each. Besides DSP features like IIR-Filters, limiters and delays, it also features 2048 Tap FIR Filters per channel. The integrated webserver and LCD display offers the user an intuitive function overview and easy configuration possibility. To provide high reliability and easy maintenance for project installations, the MA32 series features also a Pilot Tone monitoring for each connected speaker. Audio Inputs can be Dante™ (redundant), MADI / AES10 (1x optical, 2x coaxial redundant) and AES3id which can easily be assigned to any of the desired output channels. With the MA32 series we provide the key for cost effective and space-saving 3D-sound installations, live surround sound applications as well as high channel count research projects.
The D-3000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network.
The D-3000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network. Dante delivers low latency, robust synchronization, I/O scalability, and installation simplicity via standard IT technology. The D-3000 will deliver up to 3000 watts of power per channel down to 2 ohm loads. Housed in two RU compact frameworks, the D-3000 Class D amplifier offers high power with reduced size and weight. The combination Class D topology amplification circuitry combined with SMPS (Switch Mode Power Supplies) creates a high efficiency amplifier that offers reduced power consumption and low heat dissipation. The D-3000 is ideal for applications where high power and efficiency is required. This may include House of warship, arenas, stadiums, concert venues, touring or any other large-scale facilities.
The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue.
Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future.
The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue.
Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future.
D 120:4L combines 12000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.
D 120:4L combines 12000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.
The D 120:4L is based on the same foundation of robust, high-power amplifier technologies as our renowned PLM Series – an amplifier platform with a proven record of reliability and sonic performance on the world’s most grueling concert tours and in high-profile, large-scale installations.
With the D 120:4L, those same core technologies have been updated and refocused to provide the ultimate solution for the most demanding digitally networked installed sound applications – in stadia, arenas, theme parks, performing arts centers, racecourses and other large commercial sound installations.
In addition to legendary Lab.gruppen reliability and sonic excellence, the D Series incorporates newly refined outputs stage technologies along with installation-targeted hardware and software features that optimize amplifier system design and configuration. Together, these new technologies allow systems integrators to minimize both initial equipment costs and end users’ long-term energy consumption.
- Dante Ch: 8x8
- 48kHz-96kHz
D 200:4L combines 20000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.
D 200:4L combines 20000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.
The D 200:4L is based on the same foundation of robust, high-power amplifier technologies as our renowned PLM Series – an amplifier platform with a proven record of reliability and sonic performance on the world’s most grueling concert tours and in high-profile, large-scale installations.
With the D 200:4L, those same core technologies have been updated and refocused to provide the ultimate solution for the most demanding digitally networked installed sound applications – in stadia, arenas, theme parks, performing arts centers, racecourses and other large commercial sound installations.
In addition to legendary Lab.gruppen reliability and sonic excellence, the D Series incorporates newly refined outputs stage technologies along with installation-targeted hardware and software features that optimize amplifier system design and configuration. Together, these new technologies allow systems integrators to minimize both initial equipment costs and end users’ long-term energy consumption.
D 80:4L combines 8000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.
D 80:4L combines 8000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring.
The D 80:4L is based on the same foundation of robust, high-power amplifier technologies as our renowned PLM Series – an amplifier platform with a proven record of reliability and sonic performance on the world’s most grueling concert tours and in high-profile, large-scale installations.
With the D 80:4L, those same core technologies have been updated and refocused to provide the ultimate solution for the most demanding digitally networked installed sound applications – in stadia, arenas, theme parks, performing arts centers, racecourses and other large commercial sound installations.
In addition to legendary Lab.gruppen reliability and sonic excellence, the D Series incorporates newly refined outputs stage technologies along with installation-targeted hardware and software features that optimize amplifier system design and configuration. Together, these new technologies allow systems integrators to minimize both initial equipment costs and end users’ long-term energy consumption.
The K&F PLM 12k44 and K&F PLM20k44 are specifically designed for live performances and touring. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue.
Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future.
The K&F PLM 12k44 and K&F PLM20k44 are specifically designed for live performances and touring. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue.
Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future.
