Lab.gruppen – D 80:4L


More details

Similar Products

CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4240

The CMX DSP-4240 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
  • Sonance

2000.2D PowerZone Connect PRO

The PowerZone Connect PRO family brings native 70V/100V amplification and advanced DSP-based zone processing to commercial distributed audio applications, with Audinate Dante networking across all six Dante-enabled models from 300W to 4,000W total power. Each model integrates a DSP and zone processing platform supporting source selection, volume control, priority routing, input mixing, microphone ducking, EQ, filters, delay, and dynamics processing within a single configuration environment. Ships with Sonance loudspeaker presets and 70V/100V-optimized firmware preloaded for faster system setup and deployment. Managed through PowerZone Control Center for macOS, Windows, and web app from a phone, tablet, or computer. Compatible with the Blaze by Sonance Wall-M controllers and third-party platforms including Crestron, RTI, and Q-SYS via open API. Ideal for hospitality, retail, fitness, and restaurant environments. Available in half-rack 1U, full-rack 1U, and full-rack 2U form factors. ErP and ENERGY STAR compliant and backed by Sonance’s 5-year warranty.
    Amplifiers
taiden-hpa-160d-02
  • Taiden

Taiden – HPA-160D/02

The HPA-160D/02 is a Digital audio power amplifier. Its a compact and efficient combination of digital power amplifier and switching power supply.

  • Class-D power amplifier with theoretical efficiency over 80%
  • Automatic adaptation to all mains voltages world-wide
  • Low-heat generation, long service life
  • Energy saving and cost efficient
  • Operation mode: Stereo/bridge
  • 2×SPEAKON socket for loudspeakers
  • TM 2×RJ45 jack for digital audio input via Dante networking
  • 1 Line In and 1 Line Out (Diameter 6.4 mm phone jack)
  • Embedded Web Server for power amplifier configuration (e.g. limiter, EQ and mix) and view of microphone on/off status
  • All-round protection from shortcut circuit, direct current and overheating, power supply overload or overheating control
    Amplifiers