Cart
← Back to Product Catalog

Ashly – nXp1502d

Amplifiers

More details

Similar Products

csm_KME_picture_product_DA_NA480_01_4-3_bab9599ac3_4x3
  • KME

KME – NA 480

The native network-capable 4-channel amplifier speaks DANTE and has a unique operating concept. The master-slave assignments allow multiple amplifiers to be controlled in a network without the need for a separate controller or software. This integrated group-access-control represents an absolute novelty in the industry and offers significant added value.

Applications:

  • Browser based master/slave configuration
  • Build setups with up to 32 groups
  • No separate software required
  • Control of complex large systems
  • Monitoring of all devices
  • Preparation of group setups via offline editor

Special Features:

  • Integrated redundant DANTE™ digital audio networking with AES 67 support
  • Easy to use front panel interface and web UI for remote access
    (Win, OSX, Linux, iOS, Android)
  • Smart temperature management
  • Channel based editor and tuning for speakers
  • Full K.M.E. speaker library on board
    Amplifiers
See the product
linea-research-88Cxx-dante
  • Linea Research

Linea Research – 88C03-Dante

The Linea Research 88C03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 88C03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea Research 88C Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
    Amplifiers
  • Dante Ch: 8x0
  • AES67 Enabled
See the product
ashly-nXe-1.52_600px
  • Ashly Audio

Ashly – nXe1.52bd

The nXe1.52bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 2x0
See the product