Cart
← Back to Product Catalog

Williams Sound – DL210 SYS 2 2.0 D

Amplifiers

More details

Similar Products

ied-1542NA-D_600px_0|ied-1542NA-D_600px_0
  • AtlasIED

AtlasIED – IED1542NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1542NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.The 1542NA-D provides two outputs, each with 4 watts of power into an 8Ω load. This makes the module ideal for powering small zones that are made up of only a few low-powered loudspeakers.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1542NA-D model allows the use of Dante™ audio networking protocols.The 1542NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features
  • Available in single-channel or two-channel configurations
  • Available with Dante™ audio network interface
  • Control and configure using a web browser and GLOBALCOM® System Management Center
  • Settings storage in non-volatile memory
  • Full integration with theAtlasIED GLOBALCOM® vACS
  • Utilizes IEEE 802.af Power over Ethernet (PoE)
  • Removable connectors for easy installation
  • Rugged DIN-rail or panel/wall mount enclosure
    Amplifiers
See the product
Powersoft-T302_front_big
  • Powersoft

Powersoft – T302

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product
csm_KME_picture_product_DA_NA480_01_4-3_bab9599ac3_4x3
  • KME

KME – NA 480

The native network-capable 4-channel amplifier speaks DANTE and has a unique operating concept. The master-slave assignments allow multiple amplifiers to be controlled in a network without the need for a separate controller or software. This integrated group-access-control represents an absolute novelty in the industry and offers significant added value.

Applications:

  • Browser based master/slave configuration
  • Build setups with up to 32 groups
  • No separate software required
  • Control of complex large systems
  • Monitoring of all devices
  • Preparation of group setups via offline editor

Special Features:

  • Integrated redundant DANTE™ digital audio networking with AES 67 support
  • Easy to use front panel interface and web UI for remote access
    (Win, OSX, Linux, iOS, Android)
  • Smart temperature management
  • Channel based editor and tuning for speakers
  • Full K.M.E. speaker library on board
    Amplifiers
See the product