Cart
← Back to Product Catalog

KME – NA 480

Amplifiers

More details

Similar Products

ashly-nXp-8002_600px
  • Ashly Audio

Ashly – nXp8002d

The nXp8002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit
See the product
powersoft-duecanali-804-dsp-d|powersoft-duecanali-804-dsp-d
  • Powersoft

Powersoft – Duecanali 804 DSP+D

Compact and light weight, it can be used as an addition to existing systems to enhance audio reproduction in small to medium sized areas. As a standalone unit, the Duecanali 804 DSP+D amplifier platform shines with outstandingly low power consumption and thermal dissipation. Compact and light weight, it can be used as an addition to existing systems to enhance audio reproduction in small to medium sized areas. As a standalone unit, the Duecanali 804 DSP+D amplifier platform shines with outstandingly low power consumption and thermal dissipation. Built in state of the art DSP, in conjunction with Dante, allows flexibility during installation and extensive controllability.
    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
GTX-5K
  • Lynx Studio Technology

GTX-10K

The GTX Series are 4-channel, extremely high power level amplifiers designed to withstand the rough requirements of the touring market. With outstanding, high efficiency, these amplifiers have been equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface. Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired.
    Amplifiers
See the product