Powersoft - T302

Powersoft – T302

Product Information

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

Specifications

Dante Ch: 4x4
Bit Depth: 24-bit
Sample Rate: 48kHz, 96kHz
AES67 Enabled

Mansion – AMP-D100DI

AMP-D100DI is a 100Wx2 Class D power amplifier with Dante interface, accepts the Audio signal from the Dante network. With the compact housing, AMP-100DI provides the excellent sound and reliable quality for many applications. AMP-D100DI is a 100Wx2 Class D power amplifier with Dante interface, accepts the Audio signal from the Dante network. With the compact housing, AMP-100DI provides the excellent sound and reliable quality for many applications. Features

Designed in Class D circuit
Provides 100W output power each channel at 4/8 Ohms
Dante slot card to receive the signal from Dante network
12V Trigger In/Out for external control
Additional Line Out to drive another amplifier
Multiple modes to turn on amplifier
Universal Power Supply
Rack mount ears included

Amplifiers

See the product

CMX – DSP-4240

The CMX DSP-4240 is a power amplifier with DSP and Dante.

4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections

Amplifiers

See the product

210804_innosonix_ma32hp2_persp01_cut_low

Innosonix

Innosonix – MA32/HP²

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/HP² delivers 32×280W @4 Ω in only 3U of rack space with a redundant power supply.

Amplifiers

See the product

Powersoft – T302

Product Information

Specifications

Similar Products

Mansion – AMP-D100DI

CMX – DSP-4240

Innosonix – MA32/HP²

Stay connected to Dante

Support

Company

Dante Networking Alliance