Cart
← Back to Product Catalog

NEXO – DTDAMP 4×1.3

Amplifiers

More details

Similar Products

500553_AFR_Small_v2-600x402
  • Muxlab

Muxlab – Dante 2-Channel Power Amplifier 240W

The Dante 2-Channel Power Amplifier 240W (Model 500553) features a Dante slot card that accepts the digital signal from the Dante network and converts it to an analog audio signal using it as the input source of the amplifier. Simply use “Dante Controller” to route a signal from source devices that are on the same Dante network. Its space-saving 1/2 rack design allows for quick installation and provides flexibility to mix and match with other 1/2 rack products to save valuable equipment rack space. This powerful class D amplifier is combined with features such as 12V trigger control, audio-sensing, volume gain adjustment, short circuit protection and overheating protection.
    Amplifiers
  • Dante Ch: 2x0
  • 16-bit, 24-bit, 32-bit
See the product
ied-1542NA-D_600px_0|ied-1542NA-D_600px_0
  • AtlasIED

AtlasIED – IED1542NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1542NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.The 1542NA-D provides two outputs, each with 4 watts of power into an 8Ω load. This makes the module ideal for powering small zones that are made up of only a few low-powered loudspeakers.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1542NA-D model allows the use of Dante™ audio networking protocols.The 1542NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features
  • Available in single-channel or two-channel configurations
  • Available with Dante™ audio network interface
  • Control and configure using a web browser and GLOBALCOM® System Management Center
  • Settings storage in non-volatile memory
  • Full integration with theAtlasIED GLOBALCOM® vACS
  • Utilizes IEEE 802.af Power over Ethernet (PoE)
  • Removable connectors for easy installation
  • Rugged DIN-rail or panel/wall mount enclosure
    Amplifiers
See the product
GPA410_D4
  • Kingray

Kingray – GPA410_D4

GPA410_D4 is a 4-channel class-D amplifiers with DSP functions and touch screen display, Integrated with 4 analog and 4 channel AES3 digital input, optional 4 channel Dante input. Each channel can select the signal independently and set the priority to realize the signal redundancy backup function. Power, current, voltage, temperature and impedance of power amplifier can be monitored in real time, and power limit and current and voltage limit can be set freely. Application used in performance and conference.

*support 4 channel *8Ω1000W

*support constant voltage and constant resistance: 8Ω, 4Ω, 100V, 70V

*FIR function, 4*2048 TAPS

*4.3 inch IPS display, 2U size

*Voltage operation with support for 180/264VAC

*Mconsole software control by network with 2*RJ45

    Amplifiers
See the product