Dante-enabled Product Catalog

Built on the tried and tested Yamaha DME platform, the NEXO DME10 goes a step further than any other immersive processor by unlocking its raw processing power to users and allowing near limitless customisation. A 256 x 256 channel open architecture processor , DME10 ships with 32 object inputs / 16 speaker outputs included as standard, expandable in blocks of 32 x 16, 64 x 32 and 128 x 64 via a flexible licensing structure. Need the full channel count for a show today but two completely independent 64 channel immersive processors tomorrow? You can do that . With superior musical expression and sound field design, DME10 features 96kHz processing and is equipped with a wide range of DSP components that can be freely selected, connected, and configured, allowing for flexible system construction. And such is the processing power of the DME10, separate speaker system and immersive processors are no longer required. It’s all inside DME10.

NEXO’s expertise in DSP control for high-performance loudspeakers is unparalleled in the sound reinforcement industry. And Yamaha has an unrivalled heritage in developing highly efficient and reliable power amplification devices. So when the two collaborate to create a new range of powered controllers, the result is sure to be something special.

With a mains voltage range of 100 to 240 Volts it means the amplifiers can be used anywhere in the world and run on all types of power generators. Robust power supplies use PFC (Power Factor Correction) technology to ensure maximum power conversion efficiency and that the current drawn is smoothed and free of spikes to limit the stress on the mains network at all times. A flexible audio input system encompasses four, high end analogue inputs using cascaded converters for low output noise. Four digital inputs are also available through the rear panel expansion card slot offering optional AES/EBU, EtherSound™, Dante™ or AES67 inputs, all with automatic analogue fall-back. A native dual Ethernet card facilitates remote control and daisy-chaining of amplifiers, and seamless integration with Nexo’s NeMo amplifier management software. In addition to the expansion card slot, other rear panel connectivity includes RS232 serial and GPIO ports along with Speakon outputs for each of the four channels. Occupying only 3U of rack space, the NXAMP4X4MK2 weighs in at just 24.9kg.

The new NXAMP4x1 MK2 and NXAMP4x2 MK2 present NEXO expertise in DSP control in lighter, sleeker 2U packages with front panel touch screen control enabling faster and easier navigation, and giving direct access to all essential parameters. The new NXAMP4x1 MK2 and NXAMP4x2 MK2 present NEXO expertise in DSP control in lighter, sleeker 2U packages with front panel touch screen control enabling faster and easier navigation, and giving direct access to all essential parameters including: Array EQ, Mute and Meters, EQ Detail, User EQ, Inputs, Load Monitoring, Log, Scene, Setup, System Headroom, as well as Volume, Gain and Delays. A native, dual Ethernet port offers seamless integration with NEXO proprietary NeMo system management software. Amplifiers can be remote-controlled and daisy-chained via a standard Remote Control card with optional Dante, EtherSound and AES/EBU network cards available. Four high-end analog inputs use cascaded converters for low output noise, and four digital inputs are available through the rear panel expansion card slot offering optional AES/EBU, EtherSound™, Dante™ or AES67 inputs, all with automatic analog fall-back. In addition to the expansion card slot, other rear panel connectivity includes RS232 serial and GPIO ports along with Speakon outputs for each of the four channels. Available in 4 x 1300W and 4 x 2500W @ 2 ohms and weighing in at just 35 lbs. and 36.5 lbs., respectively, the ultra-low distortion Class D amplifiers combine 32-bit/96KHz converters and 64-bit signal processing to deliver significant advances in sound quality over the already highly-regarded original NXAMPs. They feature a universal power supply (100 - 240 Volts) using PFC (Power Factor Correction) technology for maximum efficiency and smooth current draw. The NXAMP4x2 MK2 is a new design in the NXAMP range, and is ideal for the NEXO GEO Series of compact line array systems and PS Series cabinets.

The new NXAMP4x1 MK2 and NXAMP4x2 MK2 present NEXO expertise in DSP control in lighter, sleeker 2U packages with front panel touch screen control enabling faster and easier navigation, and giving direct access to all essential parameters. The new NXAMP4x1 MK2 and NXAMP4x2 MK2 present NEXO expertise in DSP control in lighter, sleeker 2U packages with front panel touch screen control enabling faster and easier navigation, and giving direct access to all essential parameters including: Array EQ, Mute and Meters, EQ Detail, User EQ, Inputs, Load Monitoring, Log, Scene, Setup, System Headroom, as well as Volume, Gain and Delays. A native, dual Ethernet port offers seamless integration with NEXO proprietary NeMo system management software. Amplifiers can be remote-controlled and daisy-chained via a standard Remote Control card with optional Dante, EtherSound and AES/EBU network cards available. Four high-end analog inputs use cascaded converters for low output noise, and four digital inputs are available through the rear panel expansion card slot offering optional AES/EBU, EtherSound™, Dante™ or AES67 inputs, all with automatic analog fall-back. In addition to the expansion card slot, other rear panel connectivity includes RS232 serial and GPIO ports along with Speakon outputs for each of the four channels. Available in 4 x 1300W and 4 x 2500W @ 2 ohms and weighing in at just 35 lbs. and 36.5 lbs., respectively, the ultra-low distortion Class D amplifiers combine 32-bit/96KHz converters and 64-bit signal processing to deliver significant advances in sound quality over the already highly-regarded original NXAMPs. They feature a universal power supply (100 - 240 Volts) using PFC (Power Factor Correction) technology for maximum efficiency and smooth current draw.

Just 531mm wide and 21Kg in weight, NEXO’s extraordinary GEO M10 combines a number of patented technologies with advanced DSP control and integral, ‘no loose parts’ rigging to create a compact, powerful, wide-bandwidth module that’s quick and easy to deploy in flown arrays or groundstacks. Just 531mm wide and 21Kg in weight, NEXO’s extraordinary GEO M10 combines a number of patented technologies with advanced DSP control and integral, ‘no loose parts’ rigging to create a compact, powerful, wide-bandwidth module that’s quick and easy to deploy in flown arrays or groundstacks. Favouring innovative new thinking over conventional line array wisdom, GEO M10 partners a 1.4″ titanium diaphragm HF driver with a single, Neodymium-magnet 10” driver and delivers an unprecendented ratio of LF response to cabinet size, outperforming many larger, dual-driver designs. And with a maximum SPL of 136dB, GEO M10 is twice as powerful as its sister-system, the GEO M6, making it ideal for speech and music events with larger audiences.

Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms).  Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). The DTDAMP partners perfectly with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure – either in a ‘dry hire’ application where the user has limited knowledge, or in a fixed installation such as a bar or club. 

Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms).  Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). The DTDAMP partners perfectly with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure – either in a ‘dry hire’ application where the user has limited knowledge, or in a fixed installation such as a bar or club. 

The DTD is a unique tool, combining advanced signal processing, inherited from the NXAMP, whith an unmatched easyness of use. Flexible Inputs system The DTD offers efficient speaker processing with unmatched input flexibility: on top of the High-end Stereo balanced inputs, an AES input and a USB input (driverless USB audio playback from many OS) will allow the DTD to be connected quickly in any situation. Dantetm input is also available as an option (see ordering information). State of the Art signal processing Despite its easyness of use, the DTD is hidding state of the art audio processing, offering high precision EQ and Lienear Acoustic Phase algorithm, phase compatible with other Nexo speakers, inherited from our NXAMP range of powered TDcontroller. The DTD uses high-end AD and DA converters, 64 bits / 96 KHz DSPs, and finally an analog IN to analog OUT dynamic range of more than 112 dB, while distortion is keep under 0.001%. The DTD-I is the Installation version, with all connectors (except mini-USB) at the back on barrier strip. No hardware control , everything is set up from a PC/Mac computer connected on the USB port, allowing the settings to be locked and thus prevent any accidental changes. 

The DTD is a unique tool, combining advanced signal processing, inherited from the NXAMP, whith an unmatched easyness of use. Flexible Inputs system The DTD offers efficient speaker processing with unmatched input flexibility: on top of the High-end Stereo balanced inputs, an AES input and a USB input (driverless USB audio playback from many OS) will allow the DTD to be connected quickly in any situation. Dantetm input is also available as an option (see ordering information). State of the Art signal processing Despite its easyness of use, the DTD is hidding state of the art audio processing, offering high precision EQ and Lienear Acoustic Phase algorithm, phase compatible with other Nexo speakers, inherited from our NXAMP range of powered TDcontroller. The DTD uses high-end AD and DA converters, 64 bits / 96 KHz DSPs, and finally an analog IN to analog OUT dynamic range of more than 112 dB, while distortion is keep under 0.001%. The DTD-T is the Touring version, with its analog input and output connectors (XLR and Speakons) on the front pannel, thus saving the cost and room for an extra patch panel unit. Front panel display shows the current PS/LS setup, two hardware knobs for Sub/Main output gain, and a switch for selecting Wideband, Crossover or User (i.e. custom) mode.

The NXDT104 card allows NEXO NX amplifiers to interface with a Dante network. This allows for a NEXO loudspeaker system to talk directly to a Yamaha CL mixing console via Dante.