The CMX DSP-4240 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The all-new CloudPower series is a professional amplifiers series with feature built-in DSP and remote control over the cloud – securely. Log in to APEX Cloud and remotely-manage your amplifiers from your office. Save time and money by monitoring performance and adjusting functions without the need for a site visit.
Remote management over the APEX Cloud
WebUI with build-in Wi-Fi Hotspot
Powerful 4 channel amplifier up to 3000W per channel
The CMX DSP-4350 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The DSi 2.0 amplifier family, JBL’s first line of dedicated cinema
amplifiers, builds on Crown DSI Digital Screen Array amplifier
technology, integrating best-in-class DSP from Crown’s flagship CDi
DriveCore series to deliver potent, cost-effective amplification for
JBL’s entire range of cinema loudspeakers. Choose from three power
configurations, available in analog and analog-plus-digital “D” versions
featuring Dante/AES67 connectivity.
Deploy systems faster and
easier while streamlining hardware needs: DSi 2.0 amplifiers are
designed to meet power requirements of JBL cinema speakers, for a single
JBL cinema solution. D-models interface with Dolby Atmos directly,
without the need for additional processing hardware. JBL Cinema Speaker
presets simplify configuration, optimize playback audio and protect
against equipment damage. All DSi 2.0 amps feature SNMP connectivity for
networked audio distribution, immersive installations and direct
interfacing with third-party theater-management and cinema-control
systems.
Models supply 4 channels of amplification with
bridgeable outputs in a single 2RU footprint, and can power up to four
JBL surround speakers with a single amp channel in high-power-density 2Ω
mode. All DSi 2.0 series amps incorporate best-in-class, 32-bit/96kHz
floating-point DSP and Crown DriveCore technology, which replaces
hundreds of internal components with a single processing chip for
superior power density, stability and audio fidelity.
Cinema
managers and integrators looking to maximize their power investment and
future-proof their systems can count on the JBL DSi 2.0 series to
deliver robust, reliable amplification in an efficient, cost-effective
package.
The native network-capable 4-channel amplifier speaks DANTE and has a unique operating concept. The master-slave assignments allow multiple amplifiers to be controlled in a network without the need for a separate controller or software. This integrated group-access-control represents an absolute novelty in the industry and offers significant added value.
Applications:
Browser based master/slave configuration
Build setups with up to 32 groups
No separate software required
Control of complex large systems
Monitoring of all devices
Preparation of group setups via offline editor
Special Features:
Integrated redundant DANTE™ digital audio networking with AES 67 support
Easy to use front panel interface and web UI for remote access (Win, OSX, Linux, iOS, Android)
The Extron NetPA U 1004 is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers four 100 watt channels at 8 or 4 ohms, in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1004 includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1004 is a highly efficient advanced Class D amplifier that features defeatable auto standby with fast wake up and our patented CDRS – Class D Ripple Suppression.
The Extron NetPA U 1004-70V is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers four 100 watt channels at 70 volts, in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1004-70V includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1004-70V is a highly efficient advanced Class D amplifier that features defeatable auto standby with fast wake up and our patented CDRS – Class D Ripple Suppression.
The Extron NetPA U 1004-100V is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers four 100 watt channels in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1004-100V includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1004-100V is a highly efficient advanced Class D amplifier that features defeatable auto standby with fast wake up and our patented CDRS – Class D Ripple Suppression.
The Extron NetPA U 1002 is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers two 100 watt channels at 8 or 4 ohms, in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1002 includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1002 is a highly efficient advanced Class D amplifier that features defeatable auto standby with fast wake up and our patented CDRS – Class D Ripple Suppression.
The Extron NetPA U 1002-70V is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers two 100 watt channels at 70 volts, in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1002-70V includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1002-70V is a highly
The Extron NetPA U 1002-100V is a Dante-enabled, ENERGY STAR qualified power amplifier that delivers two 100 watt channels at 100 volts, in a half rack, 1U, plenum rated enclosure. With its integrated DSP, the NetPA U 1002-100V includes essential signal processing that offers the ability to meet the requirements of complex, decentralized systems while Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. Exceptional thermal design provides the ability to install units without using rack spaces for ventilation, conserving precious rack space. The NetPA U 1002-100V is a highly efficient advanced Class D amplifier that features defeatable auto standby with fast wake up and our patented CDRS – Class D Ripple Suppression.
NEXO’s expertise in DSP control for high-performance loudspeakers is unparalleled in the sound reinforcement industry. And Yamaha has an unrivalled heritage in developing highly efficient and reliable power amplification devices. So when the two collaborate to create a new range of powered controllers, the result is sure to be something special.
With a mains voltage range of 100 to 240 Volts it means the amplifiers can be used anywhere in the world and run on all types of power generators. Robust power supplies use PFC (Power Factor Correction) technology to ensure maximum power conversion efficiency and that the current drawn is smoothed and free of spikes to limit the stress on the mains network at all times. A flexible audio input system encompasses four, high end analogue inputs using cascaded converters for low output noise. Four digital inputs are also available through the rear panel expansion card slot offering optional AES/EBU, EtherSound™, Dante™ or AES67 inputs, all with automatic analogue fall-back. A native dual Ethernet card facilitates remote control and daisy-chaining of amplifiers, and seamless integration with Nexo’s NeMo amplifier management software. In addition to the expansion card slot, other rear panel connectivity includes RS232 serial and GPIO ports along with Speakon outputs for each of the four channels. Occupying only 3U of rack space, the NXAMP4X4MK2 weighs in at just 24.9kg.
The JBL Synthesis SDA-2200 delivers two channels of dynamic class G amplification with modern network capability, audiophile sound and exceptional flexibility.
The JBL Synthesis SDA-2200 delivers two channels of dynamic Class G amplification with modern network capability, audiophile sound and exceptional flexibility. With 200 WPC @ 8Ω, 400W WPC @ 4Ω and bridgeable for 1100 watts at 4 Ω, and class A operation to ~50W and 0.001% harmonic distortion, the SDA-2200 offers outstanding power and fidelity. Balanced and single ended inputs, RS232 and IP control as well Dante audio networking, make the SDA-2200 is a superb choice for a broad range of applications.
The JBL Synthesis SDA-7120 delivers seven channels of dynamic class G amplification with modern networking capability, audiophile sound and exceptional flexibility.
The JBL Synthesis SDA-7120 delivers seven channels of dynamic Class G amplification with modern network capability, audiophile sound and exceptional flexibility. With 100 watts per channel (all channels driven), 0.002% harmonic distortion balanced and single ended inputs, RS232 and IP control as well Dante audio networking, the SDA-7120 is a splendid choice for a broad range of applications.
The IS2250P is a Dual Channel 250W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance.
The IS2250P is a Dual Channel 250W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance.
The ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W.
Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Class D amplifiers.
The ISP also features an embedded User Interface which can be accessed from any device supporting an HTML5 compliant web browser.
The IS4120P is a Quad Channel 120W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance.
The ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W.
Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Class D amplifiers.
The ISP also features an embedded User Interface which can be accessed from any device supporting an HTML5 compliant web browser.
DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall.
High quality CLASS-D 4CH Professional AmplifierDSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall.4CH Dante™ Digital Audio InputYou can input 4CH Dante™ digital audio through the network port and 4CH analog audio inputs.Built-in DSPParametric 8 band EQ, crossover filtear using HPF and LPF,delay, attack / release adjustable limiter.Easy control of equipment through front panel with OLED and PC GUIUsing OLED and operation switches installed on the front, and DSA-500Q dedicated software, various parameters can be adjusted.Easy one-touch front dust filter cleaningIt is possible to remove the front dust filter easily by separating the ventilator on the front of the equipment by one-touch method.Simultaneous control of multiple amplifiers via PC GUIThe PC GUI allows intuitive manipulation of various functions of the DSP, and simultaneous control of multiple amplifiers through IP registration of the equipments.Up to 340 ms delay time adjustableWhen configuring a system with multiple speakers, you can adjust the Delay function to control the audio transmission time up to 340 msec for clear sound.Frequency band adjustment using HPF and LPFYou can use the Butterworth / Bassel / Linkwithz-Riley filter to adjust the frequency band required for your speakers.Unlimited preset creation for environment-optimizationUp to 10 presets can be saved to the internal memory of the device. In addition, environment parameters can be saved to a PC as a file via the PC GUI and can be easily managed without restriction on the number of files.
Now you can power SSP6 Multiducers using audio from your Dante network. The LZ220 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. The amp uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.
Now you can power SSP6 Multiducers using audio from your Dante network. The LZ220 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. The amp uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.
Specifications
Configurations
4/8/16 Ω
Power Output
2 x 20W
Control Options
Dante®
DSP processes/EQ
EQ optimized for SSP6
Frequency Response
20 Hz – 20 kHz, 4/8 Ω
Connectors
Input: Dante (RJ45)
Output: Euroblock
Regulatory
UL 2043 listed, CE, RoHS
Weight
0.60 lbs (0.27 kg)
Dimensions
1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)
Now you can power SSP6 Multiducers using audio from your Dante network. The CV140 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. It uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.
Now you can power SSP6 Multiducers using audio from your Dante network. The CV140 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. It uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs.
The CV140 provies 1 channel of 40 watts at 70V/100V.
Specifications:
Configurations
70/100V
Power Output
1 x 40W
Control Options
Dante®
DSP processes/EQ
EQ optimized for SSP6
Frequency Response
100 Hz – 20 kHz, 70.7 / 100V
Connectors
Input: Dante (RJ45)
Output: Euroblock
Regulatory
UL 2043 listed, CE, RoHS
Weight
1.0 lbs (0.45 kg)
Dimensions
1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)
Mezzo offers the same sound clarity, reliability, and overall build quality of any Powersoft install dedicated amplifier platform in a ½ rack unit form factor. It comes in 2 power supply sizes, 2 or 4 channels, and state of the art DSP.
All models offer multiple analog input options, and the 2 channel versions feature line level outputs.
AD versions of Mezzo add audio networking capabilities with DanteTM/AES67 and an internal Gigabit Ethernet switch and a second port so that multiple products can share the same network cable.
The smaller versions of Mezzo are sealed designs, therefore approved for hidden placement, such as mounted above the ceiling or tucked in a wall box.
The included mounting accessories allow multiple options: 1 or 2 Mezzo in a 19” Rack, 1 Mezzo in an 11” rack, wall mount brackets allow it to be mounted on any flat surface, also under a table or in the ceiling. Rubber feet allow Mezzo to be placed on a shelf.
The Linea Research 44M20-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44M20-Dante delivers 5000W per channel into 2 Ohms , 3000W per channel into 4 Ohms, 1500W per channel into 8 Ohms.
Linea research 44M Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
For portable applications 44M Series amplifiers can be controlled from the front panel or via PC software.
The
NT series is a range of network-enabled amplifiers designed for
installations requiring premium sound quality and high output power.
The NT series network amplifiers offer next-generation D-class amps. The NT1308D is an eight channel amplifier at 130 Watts per channel. NT amplifiers offer a highly efficient power supply that draws less power and produces less heat for saving on energy and air conditioning. Ethernet connectivity ensures complete control of the NT system’s functions regardless of your location, while optional Dante connectivity enables all signals to be routed to remote units with ease.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
