Cart
← Back to Product Catalog

Seikaku – ADH500.4

Amplifiers

More details

Similar Products

linea-research-88Cxx-dante
  • Linea Research

Linea Research – 88C10-Dante

The Linea Research 88C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 88C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea Research 88C Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product
EM_Acoustics_-_DQ20|EM_Acoustics_-_DQ20
  • EM Acoustics

EM Acoustics – DQ20

The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities. The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities. The DQ Series of advanced system amplifiers offer a unique combination of high power and audio performance, seamlessly combined with advanced DSP and network control. The DQ Series offers three models, physically identical four-in-four-out amplifiers but with varying total output power configurations of 6,000 watts (DQ6), 10,000 watts (DQ10) and 20,000 watts (DQ20) to suit specific loudspeaker models and audio applications. The DQ Series models offer extremely high power density in a convenient and flexible format for both mobile applications and installations alike. DQ Series advanced system amplifiers represent the most convenient solution for powering EM Acoustics loudspeakers. Each amplifier comes loaded with preset files for all EM Acoustics loudspeaker products, as well as a dedicated “linear” preset with no processor settings applied – but also blank memory slots for users to create their own setting files. Aside from the non-adjustable factory settings for each EM Acoustics product (such as high/low pass filters and limiters), users have access to a variety of processing functions including gain, delay and EQ (parametric and shelf) for system or venue optimisation. Power delivery is an area where the DQ Series amplifiers are unmatched. A state-of-the-art switchmode power supply with power factor correction ensures that a DQ Series amplifier can deliver all that is required, even under demanding load conditions and across a wide range of mains supply voltages. Each channel of a DQ Series amplifier can be configured to deliver its maximum power into either 2 or 4 Ohm nominal loads via the Podware software platform, therefore offering designers and integrators unparalleled flexibility and effectiveness. The use of state-of-the-art components and a finely optimised design results in generous power reserves, thus ensuring that pristine sound quality is maintained even under the most extreme conditions, anywhere in the world. DQ Series amplifiers have both analog inputs (4) and AES3 digital inputs (2) as standard, and can be supplied with an optional Dante™ networked audio input card if required (model numbers DQ6D, DQ10D and DQ20D). Maximum flexibility was the thought process with regards the input infrastructure – the four-in-four-out configuration allows the DQ Series models to be highly flexible whether deployed powering front of house systems, monitor mixes, or fill loudspeakers. The front panel provides an intuitive set of controls and indicators to enable simple and straightforward operation of all functions without the need for the remote software. A set of five LED indicators show signal level from -12dB to +12dB as well as clip, for each of the four DSP inputs. Six illuminated push buttons and two velocity-sensitive rotary encoders provide the user interface for all the input and output functions, as well as the utility features, in conjunction with the clear back-lit graphical display. A further set of LED indicators show output level and limiter status, and individual backlit channel mute buttons are also provided. A final set of four LED indicators give further status information for the amplifier including AES3 or Dante network audio input (if selected), device control network online status, and also the presence of a system EQ overlay if activated via the Podware remote control software platform.
    Amplifiers
See the product
LEA_Professional_Connect_Series_84D|LEA_Professional_Connect_Series_84D
  • LEA Professional

CS84D

The Connect Series 84D is a 4-channel amplifier with 80 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 84D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Then there’s the Cloud…DANTE CONNECT SERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. Register for your free LEA Cloud account at leaprofessional.cloud

The DANTE CONNECT SERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

    Amplifiers
See the product