Cart
← Back to Product Catalog

Cloud – CA Series

Amplifiers

More details

Similar Products

Bittner_Audio_4Xe_500x108
  • Bittner Audio

Bittner – 4X 1200e

The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xe and the rear control version, the 4Xi, both offer the following specifications:
  • Up to 4x 2000 W in only 2 RU
  • Impedance measurement
  • Selectable Clip Limiter (hard/soft)
  • 4-channel Dante Inputs
  • SXL II Dataport (RS485)
  • High Tech SMT Design
  • Excellent sound and superior impulse response
  • 2 separate stereo amplifiers
  • Ready for 2 Ohm operation
  • Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
  • XLR inputs and Speakon outputs (e version)
  • Phoenix in- and outputs (i version)
  • High-End switched power supply with PFC
  • LED indicators for SIGNAL, CLIP, PROTECT, POWER
  • Temperature controlled, variable speed low noise fans
  • Digital wear-free Volume Controls (can be operated manually)
  • Selectable Stereo/Bridged Mode
  • Softstart
  • Sequential Remote Power On
  • 2 Alive Contacts
  • 3 Years Warranty
    Amplifiers
See the product
Ashly_-_nXe_1504|Ashly_-_nXe_1504
  • Ashly Audio

Ashly – nXe1504bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 4x0
See the product
ashly-nXe-1.52_600px
  • Ashly Audio

Ashly – nXe1.52bd

The nXe1.52bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 2x0
See the product