Dante-enabled Product Catalog

The Duet digital wireless monitor system represents a significant step forward for touring performers and other professionals requiring high definition audio in their ears. With 24 bit digital audio, low latency, Dante inputs and a compact, lightweight, diversity bodypack unit, the Duet system should please even the most demanding users, both on and behind the stage.

The new Duet digital wireless monitor system consists of the M2T dual-stereo half-rack transmitter and M2R diversity belt pack receiver. The Duet covers the UHF frequencies of 470-608 MHz (138 MHz) in a single range, uses digital modulation for transmission, and can accept analog or Dante™ digital inputs. The new system can be considered a "wireless IEM" or a deluxe IFB product, designed and developed with professional touring, installation, theater, filmmaking and broadcast customers in mind.

The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full size XLR/TRS combo types for balanced line level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise. A Dante Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can cascade the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.

The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other noisy environments. A high-resolution, color LCD allows for a wide range of menu options, including precise limiter settings, using detailed graphics. The M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells.

The FM+ End users can listen with either an FM receiver or over Wi-Fi with their own smartphone. Along with this flexibility comes exceptional audio quality, as the FM+ is built on a professional digital audio (DSP) platform. Added plus: Its optional Dante interface provides integrators with a full audio networking solution.

The new FM+ is designed to support those who want to use their own smartphones and headphones for a more discreet assistive listening experience. Simplicity is also available for those who want a more traditional assistive listening system with a dedicated FM receiver and headset.

The FM+ Dante interface provides integrators with a full digital audio networking solution. It is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110.

The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. The D/A circuitry offers >120dB of dynamic range, audiophile quality. The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network. The D/A circuitry offers 120dB of dynamic range - ten times better than similar competing products. All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.

Scorpio is a premium, portable, 32 channel, 36 track mixer-recorder and the most powerful product ever designed by Sound Devices.  Scorpio is a premium, portable, 32 channel, 36 track mixer-recorder and the most powerful product ever designed by Sound Devices. With 16 mic/line preamplifiers, 32 channels of Dante in and out, AES in and out, 12 analog outputs and multiple headphone outputs, Scorpio is well-suited for any production scenario. A fully-customizable routing matrix enables sound professionals to send any input to any channel, bus, or output. Up to 12 buses may be individually mixed. Due to its compact form factor, the Scorpio is equally at home over-the-shoulder or in a mobile rig. Scorpio incorporates Sound Devices’ most cutting-edge technology. An ultra-powerful engine comprised of three FPGA circuits and six ARM processors deliver the horsepower needed for the most complex tasks. FPGA-based audio processing with 64-bit data paths ensures the highest sound quality and reliability. The Scorpio also features Sound Devices’ latest and best in analog microphone preamplifier design. These preamps have the smoothest sound and lowest noise of any preamp in the company’s 20-year history and include built-in analog limiters, high pass filters, delay, 3-band EQ and phantom power. The Scorpio has an internal 256GB SSD and can simultaneously record to two SD cards for redundancy. For additional flexibility, sound professionals can send different files to their choice of media. The companion SD-Remote Android application allows for control of the Scorpio via a large display. Great attention to detail has been paid to every aspect of the Scorpio’s design. Most common menus are accessible with only one or two button presses, and many menu shortcuts can be achieved with only one hand. Scorpio features a built-in dual L-Mount battery charger and may be powered with L-Mount batteries or via the TA4 DC inputs using smart batteries, NP-1 batteries, or in-line power supplies. The ultra-accurate, fully-featured timecode generator contains its own battery to hold timecode for up to four hours after power off.

A 2U 19inch rack mounted Dante monitoring and diagnostic unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz).  A 2U 19inch rack mounted Dante monitoring and diagnostic unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz). The signals are presented to the user via the inbuilt 75mm full range speakers which are mounted in optimised ported cabinets for a high quality sound or the via the 6.35mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RD Dante. The RD Dante is operated and controlled via the large 5.0” diagonal (127mm) 24bit colour LCD and capacitive touch panel. A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RD Dante very quickly. The high resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.  Firmware updates of the RD Dante are achieved via a dedicated USB B connector on the front panel. There is also a dedicated 6.35mm jack socket for the headphone output and a 6.35mm jack socket to input a line level source such as an iPod etc.

planet 22x is a revolutionary new audio interface that combines the most modern networking audio technology based on the popular Dante protocol with the requirements of a professional high end desktop recording audio interface in studio and in mobile environments. planet 22x is a revolutionary new audio interface that combines the most modern networking audio technology based on the popular Dante protocol with the requirements of a professional high end desktop recording audio interface in studio and in mobile environments. The audio interface is equipped with ultra high quality 24-bit / 96kHz AD converters with 118dB(a) dynamic range and 24-bit / 96kHz DA converters with 123dB(a) dynamic range. The two balanced analog line inputs can also be used with the integrated ultra low noise and precise professional microphone preamplifiers and the special Hi-Z instrument input stages. The balanced master line output can be controlled with a high precission master level step-potentiometer, plus there is a high quality headphone amplifier on the unit. planet 22x can be powered either via an included 12V DC power supply or via the network cable as a PoE (Power over Ethernet) device. This makes it possible to use the interface even when there is no power outlet close by. By supporting Dante, planet 22x combines and works with any other Dante devices in an IP audio network, which makes it also a cost effective solution to extend any existing network with additional audio channels, yet it has also been designed to be a flexible professional audio interface using the Dante Virtual Soundcard for any modern recording applications on both Mac and PC - in any professional studio environment. Features

• Dante network audio interface with 2 analog inputs and 2 analog outputs
• 2 balanced XLR / TRS combo inputs
• 2 balanced XLR outputs
• high end 24-bit / 96kHz AD converters with 118dB(a) dynamic range
• high end 24-bit / 96kHz DA converters with 123dB(a) dynamic range
• per channel professional low noise microphone preamplifiert with adjustable gain
• +48V phantom power for connected microphones
• per channel high quality Hi-Z instrument input stage
• precise step-potentiometer to control the master output level of the line outputs
• high quality adjustable headphone output
• 12V DC power supply included
• power supply via network cable possible (PoE / Power over Ethernet)
• license of the Dante Virtual Soundcard for Mac / PC included
• supports Windows 7, Windows 8.1 and Windows 10 with WDM and ASIO 2.0
• supports macOS via CoreAudio
• includes license of Deckadance LE from Stanton
• includes Bitwig Studio 8-Track digital audio workstation software
• dimensions roughly 17.5cm x 12.0cm x 4.5cm

Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.    Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.  Atlas offers eight analogue recording channels, eight monitoring outputs, stereo digital input and output on a phono connector plus concurrent optical digital I/O ports that can interface to S/PDIF or ADAT data formats, giving Atlas a maximum capability of 18 concurrent input and output channels plus stereo headphones.   

Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.    Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications. 

The Model 381 On-Air Beltpack offers a unique combination of audio resources to directly support a complete broadcast "stand-up" on-air position.  The Model 381 On-Air Beltpack offers a unique combination of audio resources to directly support a complete broadcast "stand-up" on-air position. Using Dante® audio-over-Ethernet technology, the unit provides main and talkback output channels, talent cue (IFB) input, and sidetone capabilities, as well as essential user controls in a compact, portable package. The Model 381 is compatible with the Dante Domain Manager™(DDM) software application and is AES67-compliant for direct integration into many contemporary networked audio applications. Key Features

• Dante audio-over-Ethernet technology
• Creates complete "stand-up" on-air position
• One main and one talkback output channel
• Highly-flexible 2-channel headphone output
• Integrated sidetone function
• Excellent audio quality
• Uses STcontroller for configuration
• Power-over-Ethernet (PoE) powered

The Model 5418 Mic/Line Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. The Model 5418 Mic/Line Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. Eight analog microphone- or line-level sources can be connected to the unit and then output in the digital domain by way of a Dante interface. Eight digital audio signals, which arrive by way of Dante, are converted to analog and then output as balanced line-level signals. Configuration choices also allow other audio signals to be selected as the sources for the analog output channels. A monitor section allows the input and output signals to be selectively observed using meters and a headphone output. Key Features

• Dante audio-over-Ethernet technology
• Eight mic/line inputs to Dante outputs
• Eight Dante inputs to line-level analog outputs
• Flexible monitoring with metering and headphone output
• Three Gigabit Ethernet interfaces
• Standard connectors
• Excellent audio quality
• AC mains and 12 volt DC powering
• Lightweight enclosure, single rack-space (1U) mounting

Audio Systems

From a straightforward system design with one speaker through to configurations involving many speakers, digital PA provides an easy to use audio system with leading edge technology that is effortlessly customised and completely networkable. Basic digital PA systems can be configured for many different settings and are suitable for corporate offices, retail outlets, pubs, clubs, churches, schools and more. Features:

• Individual volume control
• Web, mobile and tablet control
• Easily configurable and scalable
• Highly intuitive for users
• Source selectors
• Multiple inputs and sources

Products Include: Network Amplifier Modules (NAM) Network Amplifier Modules (NAM) can be installed in the field near the location of the speakers. Each NAM has 4 x 12 Watt RMS class D amplifier channels, an Ethernet switch and built in DSP (EQ, FIR, delay and gain). Indoor and outdoor (IP66) versions are available. Each amplifier has an individual Dante input allowing for simple zoning and future changes. Dante Input / Output (DIO) The DIO offers an impressive range of tools and converters. It boasts a 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources. Zone Controller – The Dante™ Source Selector Zone Controller can integrate into any digital PA system and control all NAMs and DIOs via a simple GUI on mobiles, tablets and desktops. Additionally, it can be installed to work with all existing analogue PA systems giving them the same easy-to-use interface as the newest digital PA. Users can adjust volumes, select sources, mute and maintain the offsets between multiple speakers and zones. It is possible to have unlimited controllers and sources, up to 20 zones and up to 100 devices per controller. Desk 16 Mini Paging Panel This multi-purpose digital PA Paging Panel is used for making announcements, listening to audio as well as logic control and offers a fully functional intercom system. The digital PA Desk 16 Mini, is a completely configurable, Dante-enabled Paging Panel. Desktop panels and rackmount panels are available.

Matrix and Paging

Suitable for larger areas and across multiple sites. These systems include; audio prioritisation, DSP and the ability to incorporate paging stations. With other features such as ambient noise control, these systems are designed to handle any challenge with ease. Matrix and Paging digital PA systems work at their best for large public areas (such as Sydney’s Darling Harbour precinct), transport hubs (train stations, airports, bus terminals etc), casinos and other large public venues. These systems also work for multi-site applications across any IT network near or far. Features:

• Audio mixing
• Audio prioritisation
• Multiple audio sources
• Multiple paging stations, from one to hundreds
• Suitable for multi-site installations
• Ambient noise control

Products Include: Compact Frame The Compact Frame allows for smaller scale systems with a set input/output. They offer a fully summing audio matrix with broadcast quality audio. These frames allow remote configuration over the network, have redundant power supplies and are expandable by up to 64 Dante channels. MF4 Frame The MF4 series is a modular system with each frame having the capacity to run up to 256 zones. The MF4 includes redundant power supplies and supports analogue, AES, Dante and MADI as well as GPI/O and an API. Paging Panels The multi-purpose digitalPA Paging Panels are used for making announcements, listening to audio as well as logic control and offer a fully functional intercom system. Desktop panels and rackmount panels are available.

For audio professionals working in stereo, surround and immersive formats up to 22.2, Grace Design presents the M908. With powerful DSP functionality, the latest generation AD/DA converters, and a highly intuitive control platform, the M908 provides a comprehensive, all in one monitoring solution for a vast array of formats and workflows.

• 24 channel AES3 digital I/O / 16 channel analog outputs
• 16 channel ADAT Lightpipe in / USB 24 channel inputs
• AES3, S/PDIF, and TOSLINK stereo inputs
• Optional Dante™ or DigiLink™ module for an additional 32 channels of I/O
• Optional 8 channel ADC module for 8 or 16 channel analog inputs
• Our latest generation of AD and DA converters
• 4th generation s-Lock pll clocking system for vanishingly low jitter
• High resolution volume control
• Powerful room correction EQ
• Complete bass management capability
• Channel level and delay calibration
• Comprehensive downmix control
• Built in SPL meter and pink noise source
• Powerful and intuitive remote control unit for access to all system controls and calibration
• Dual redundant external power supply
• Reference quality headphone amplifier with cross-feed
• Flexible talkback system with built-in mic on remote control and mic input for external talkback mics
• Up to 8 stereo CUE paths
• 4 General Purpose Input and Output pins for interfacing to external systems

Sennheiser's EM 6000 is a digital 2-channel receiver for live productions and transmissions, even in the toughest environments. Huge spectral efficiency with equidistant frequency grid and true bit diversity. Analog and digital outputs (XLR, jack, AES-3, redundant Dante™), high-contrast OLED display with LQI indicator.   Sennheiser's EM 6000 is a digital 2-channel receiver for live productions and transmissions, even in the toughest environments. Huge spectral efficiency with equidistant frequency grid and true bit diversity. Analog and digital outputs (XLR, jack, AES-3, redundant Dante™), high-contrast OLED display with LQI indicator. Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways. Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output. The Dante™ version with an Audinate Brooklyn ll card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling. Whether we’re talking about reducing information down to the really meaningful key values or smart menus on a high-contrast OLED display, every operating element is a result of practical experience and designed for practical use. All the vital parameters are summarized in one view. Important functions can be reached directly via home screens without long navigation paths. The auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver; naturally Digital 6000 can also be monitored and configured via the Wireless System Manager (WSM). The EM 6000 is compatible with UHF Sennheiser antenna systems.

The Power Core RP is a fully featured Remote Production solution for mc² audio consoles with integrated modular I/O, DSP and IP streaming capabilities The Power Core RP is a fully featured Remote Production solution for mc² audio consoles with integrated modular I/O, DSP and IP streaming capabilities. Power Core RP combines modular audio I/O and high-density DSP processing functionality into a WAN-capable IP node. The unit’s ST2022-7 network redundancy and its Class-C jitter/network latency robustness eliminate the need for dedicated WAN-gateways from 3rd party suppliers and thus reduces the set-up complexity of remote productions, plus it reduces potential single points of failure. The unit’s comprehensive audio connectivity includes two redundant 1GbE SFP ports for AoIP, four MADI ports plus eight modular I/O slots which can be filled with a mix of Mic/Line, AES3, MADI or DANTE cards. Even a studio card with Mic/Line in/out and two headphone amplifiers is available. Power Core RP ’s DSP capabilities include 48 fully featured processing channels and provide low-latency on-site monitor and IFB mixing. mc2 consoles at home have full control of all relevant channel parameters (gain, fader, mute, EQ, dynamics, Aux Send Level…) of the DSP node at the remote location. A touch-screen optimized control GUI provides additional control for on-site and remote operation. The Power Core RP is standards-based and natively supports ST2110-30/-31, AES67 and RAVENNA AoIP networking. The unit is the perfect mate for Lawo’s video contribution solution V__remote4, which provides WAN-capable bi-directional signal transport for 4K/3G/HD/SD-SDI video signals plus a comprehensive set of onboard video processing features.

The AVN-CU4-DANTE is a portable commentator unit. Using Dante® AoIP together with 4 wire connections the AVN-CU4-DANTE bridges the gap between old and new technology, allowing the ease of connectivity & functionality of AoIP, together with the legacy connections needed to operate with the existing infrastructure in some stadia and sports grounds. The AVN-CU4-DANTE is a portable commentator unit. Using Dante® AoIP together with 4 wire connections the AVN-CU4-DANTE bridges the gap between old and new technology, allowing the ease of connectivity & functionality of AoIP, together with the legacy connections needed to operate with the existing infrastructure in some stadia and sports grounds. This new Dante® commentary unit has been beautifully designed and is the same size as the existing Sonifex CM-CU1 single 4-wire unit whilst packing in more features. It’s been designed from the ground up to be configurable for different situations with config files that can be saved and recalled for quick setup. Additionally, buttons and rotary encoders can be locked out from use, if the unit is being operated by less-technical commentators. The AVN-CU4-DANTE is a dual version of the AVN-CU2-DANTE providing four mic/line inputs with a wide, adjustable gain range and four stereo headphone outputs with lockable jack sockets, suitable for operation by three or four commentators.

The Model 204 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications.  The Model 204 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The unit is housed in a compact, rugged steel enclosure that's intended for table-top use. Calling the Model 204 "cute" or "cool" would be accurate; its nicely proportioned but diminutive size makes it ideal for use in space-constrained locations. The Model 204 supports Dante® audio-over-Ethernet digital media technology with AES67 compatibility for integration into contemporary applications. The unit is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 204's audio quality is excellent, with low distortion, low noise, and ample headroom. Careful circuit design and rugged components ensure long, reliable operation. The Model 204 integrates directly into both Dante audio-over-Ethernet and standard analog audio environments. With just a Power-over-Ethernet (PoE) connection, a microphone, and a pair of headphones or an earpiece, a complete broadcast on-air position can be created. And by using the Model 204's microphone output a direct connection to an analog microphone-level input on an associated camera, remote I/O interface, or audio console can be supported. Two remote control inputs allow external switches or contact closures to activate the main and talkback button functions. Model 204 operating features are configured using the STcontroller personal computer software application. An extensive set of parameters allows the unit's functions to be tailored to meet the needs of many applications. STcontroller, compatible with version 7 and later of the Windows®operating system, is a fast and simple means of confirming and revising the unit's operating parameters. Applications The Model 204 on its own can provide an "all-Dante" solution for one on-air talent location. A wide range of applications can be supported, including sports and entertainment TV and radio events, streaming broadcasts, corporate and government AV installations, and post-production facilities. The unit's small size makes it ideal for live-sports applications, such as basketball, where physical space for personnel is very limited. Four Dante receiver (audio input) channels supply the user with their talent cue (IFB) signals. Should the cue signal be "mix-minus" an integrated sidetone function can provide the user with a microphone confidence signal. Two Dante audio output channels, one designated as main and the other as talkback, are routed via an associated local-area network (LAN) to inputs on Dante-compatible devices. Two pushbutton switches, main and talkback, provide the user with direct control over audio routing. The audio switching is performed in the digital domain and is virtually "click-free." By providing the main audio signal in two forms, Dante digital audio and analog microphone level, the Model 204 makes integration into a wide range of on-air environments easy to accomplish. The talkback audio channel is available as a Dante output channel which makes routing to an input on a variety of devices, such as matrix intercom systems, audio consoles, and monitor loudspeaker systems, simple and flexible. Some applications may benefit from not utilizing the Model 204's Dante main output channel. This typically won't be an issue of inadequate audio quality but rather a need to match work-flow requirements. For example, for lip-sync or transmission purposes it may be optimal to have the on-air audio transported as an embedded signal along with the associated camera video. Alternately, all on-air audio sources may need to connect to inputs on an audio console or console-related I/O unit. Supporting these scenarios is not a problem as the Model 204 supplies a microphone output connection that’s specifically intended for this purpose. Simply connect the unit's microphone output connection to the desired analog input, such as the mic/line input on an ENG-style camera—that's it! The circuitry associated with the Model 204's analog microphone output is very simple, essentially a passive path that routes a signal connected to the microphone input connector directly to the microphone output connector. A solid-state circuit, in series with the mic in-to-mic out path, allows muting of the signal on the microphone output connector whenever the Dante main output channel is muted. Having both the Dante main output and the microphone outputs work in tandem can be a valuable resource, allowing one to serve as the primary on-air signal source while the other serves as the backup.

The Radial DiNET™ DAN-RX2™ receiver is an expanded version of the DAN-RX Dante interfaces. Featuring Neutrik Ethercon connectors demanded by professional touring clients, both boxes deliver 24bit/96kHz resolution across any network using the Dante protocol. The DAN-RX2 is a 2-channel endpoint device, with Ethercon network input and XLR outputs. It also includes a powerful headphone amplifier with both ¼” and 3.5mm outputs.

The Synapse D32o is a Dante™/AES67 networked audio interface with 32 line level analog outputs. Features

• 32 line level balanced outputs with front panel for network level control
• Pair with the Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
• Software controllable output matrix routing
• Supports Dante™-AES67 Interoperablity Mode for universal network audio compatibility with virtually any networked DSP or mixing console
• Easily assignable front panel headphone access, volume control and source selection - includes local input and Dante™ monitoring modes
• Integrated power supply with optional external supply for applications  requiring redundant power requirements
• Configurable Dante™ interface for redundant or switched operation
• Integrated SFP ports for direct connection to fiber for long haul signal extension applications
• SFP Ports can double as switched connections in both redundant and switched operation to minimize the need for external network switches

The Synapse DM1 is a Dante™/AES67 Rackmount audio monitor. Features

• Supports easy monitoring of 32 Dante™ channels in standard monitoring mode and 128 subscription based monitoring channels in extended mode
• Transmits local analog audio channels and selected monitor audio channel to Dante™
• Supports Dante™-AES67 Interoperablity Mode
• Easily assignable front panel headphone and integrated speakers for confidence monitoring applications.
• Integrated power supply with optional external supply for applications  requiring redundant power requirements
• Integrated SFP ports for direct connection to fiber for long haul signal extension applications
• SFP Ports can double as switched connections in both redundant and switched operation to minimize the need for external network switches

The Synapse D16Mio is a 16 Channel I/O 1RU Dante™ / AES67 interface. Features

• 16 studio-grade mic preamps with line level capability as well
• Front panel network control of mic preamp gain, phantom power, mic/line input sensitivity
• 16 line level balanced outputs with front panel or network level control
• Useful for studio, live, rental and fixed installations requiring high numbers of high quality audio I/O
• Supports Dante™-AES67 Interoperablity Mode
• 16/24 bit, 44.1/48/88.2/96 kHz analog to Dante™ conversion
• Easily assignable front panel headphone access, volume control and source selection - includes local input and Dante™ monitoring modes
• Integrated power supply with optional external supply for applications  requiring redundant power requirements
• Integrated SFP ports for direct connection to fiber for long haul signal extension applications

DM-24.8 are mixers for professional use. They can be used in flowing electromagnetic environment: residential, commercial and light industrial, urban outdoors.

• 24 line-level inputs
• 8 Aux sends
• 2 internal FX
• 1 stereo main out
• All channels Control Room outputs
• 1 headphone output
• 100mm precision motor fader
• 24-bit / 48kHz sampling rate
• digital noise gate
• digital 4 band full parametric EQ
• PAN
• phase reverse
• Time delay
• DAC for Digital Control Audio or Mute
• Lock and unlock function
• change the password
• Program，save，load & copy functions
• Remote Control ：Ethernet or USB
• iPad App DM-24.8 editor for wireless control
• 7 inch color LCD touch screen for graphical view and setup
• 1-24 microphone preampliers with dedicated trim control
• Expend socket for option module：Multi-track USB  audio recording module or CobraNet module or dante module etc.

DR16.4 are mixers for professional use.They can be used in fllowing electromagnetic environment: residential, commercial and light industrial, urban outdoors. DR16.4 are mixers for professional use.They can be used in fllowing electromagnetic environment: residential, commercial and light industrial, urban outdoors.

• 1-10 microphone preamplifiers with dedicated trim control
• 16 line-level inputs
• 1 internal FX
• 1 stereo main out
• All channels Control Room outputs
• 1 headphone output
• 320*240 color LCD touch screen for graphical view and setup
• 24-bit / 48kHz sampling rate
• Program, save, load & copy functions
• Digital noise gate
• Digital 4 band full parametric EQ
• PAN
• phase reverse
• Time delay
• DAC for Digital Control Audio or Mute？
• Remote Control ：Ethernet
• IPad App DR-14.2 editor for wireless control
• Expend socket for option module：Multi-track USB  audio recording module or CobraNet module or Dante module etc.

The Virgil OB is a robust portable PoE powered headphone amplifier with the addition of a pair of balanced analogue outputs all built into a hardwearing lightweight aluminium case. Long Product Description (150 words or less): Virgil OB receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume of the headphones. The 2 incoming audio circuits are also presented on a pair of balanced analogue audio XLRs on the rear of the unit. A switch on the side of the unit sets these 2 outputs to be post or pre fade of the front panel level control. The Virgil OB is housed in a robust but lightweight aluminium casing that has been proven to withstand the rigours of life on the road. It also features a hardwearing beltclip allowing the unit to be quickly and securely attached to both people and infrastructure. As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil OB suitable for driving television presenters ear pieces.

The Vita BB Plus is a simple to use but high quality announcers unit for one announcer. A neat remote control App is provided to enable real time control by an engineer or technician. The VITA BB PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel The high quality microphone input, with the Glensound Referee compressor, makes the Vita BB Plus suitable for on air commentary use, perfect for a small OB or in an off-tube booth. The flexibility of the talk button configurations, means that the Vita BB Plus can also be used as a talkback unit as part of a Dante network. The Vita BB Plus can connect to any Dante network, or to other audio equipment via Glensound’s own Dante interface units.

The Model 205 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The Model 205 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The unit is housed in a compact, rugged steel enclosure that’s intended for table-top use. Calling the Model 205 "cute" or "cool" would be accurate; its nicely proportioned but diminutive size makes it ideal for use in space-constrained locations. The Model 205 supports Dante® audio-over-Ethernet digital media technology with AES67 compatibility for integration into contemporary applications. The unit is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 205's audio quality is excellent, with low distortion, low noise, and ample headroom. Careful circuit design and rugged components ensure long, reliable operation. Key Features

• Dante audio-over-Ethernet technology
• Digital audio and direct-microphone outputs
• One main and two talkback output channels
• Highly-flexible 2-channel headphone output
• Compact unit supports one on-air location
• Excellent audio quality
• Uses STcontroller for configuration
• Power-over-Ethernet (PoE) powered

The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment.  The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The AV-NH1 is a professional grade product for studio quality fidelity and low noise performance. The AV-NH1 may be powered from an external 24 Vdc power supply, available separately. The AV-NH1 is equipped to operate from a PoE enabled network switch. The AV-NH1 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NH1, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The AV-NH1 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Features

• Converts Two Dante Network Audio Signals to a Stereo Headphone
• Output on Professional Quality 3.5 mm stereo MINI Jack
• Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Front-Panel Output Level Control
• Special Software Not Required for Module Setup
• Exceptional Low-Noise and Low-Distortion Performance
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicator for Valid Power and Network Sync
• Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
• Mounts on a Microphone Stand using an RDL SF-MSM1

The Model 206 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications.  The Model 206 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The unit is housed in a compact, rugged steel enclosure that's intended for table-top use. Calling the Model 206 "cute" or "cool" would be accurate; its nicely proportioned but diminutive size makes it ideal for use in space-constrained locations. The Model 206 supports Dante® audio-over-Ethernet digital media technology with AES67 compatibility for integration into contemporary applications. The unit is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 206's audio quality is excellent, with low distortion, low noise, and ample headroom. Careful circuit design and rugged components ensure long, reliable operation. Key Features

• Dante audio-over-Ethernet technology
• Digital audio and direct-microphone outputs
• One main and three talkback output channels
• Highly-flexible 2-channel headphone output
• Compact unit supports one on-air location
• Excellent audio quality
• Uses STcontroller for configuration
• Power-over-Ethernet (PoE) powered