Prism Sound – Atlas


More details

Similar Products

equipson-dd2
  • WorkPro

WorkPro – DD2

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

    I/O Interfaces
NetBox32_Front
  • AEQ

AEQ – NetBOX 32 AD

NETBOX 32 AD interface features 32 input and 32 output channels organized in 16 mono analog + 8 stereo digital channels. The stereo digital audio channels can be configured as AES/EBU or SPDIF standard. It also incorporates 16 GPI and 16 GPO (each GPO connector includes a power supply pin to feed the output circuitry). NETBOX 32 AD interface features 32 input and 32 output channels organized in 16 mono analog + 8 stereo digital channels. The stereo digital audio channels can be configured as AES/EBU or SPDIF standard. It also incorporates 16 GPI and 16 GPO (each GPO connector includes a power supply pin to feed the output circuitry). Due to its high input and output capacity, it is especially suitable for central controls and link dispatches and also to increase or distribute the capacity of TDM BUS matrixes such as the AEQ BC 2000D.
    I/O Interfaces
arista-ars-0202-b11
  • Arista

Arista – ARS-0202-B11

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

  • E-Vocal ARS-0202-A00
  • E-Vocal ARS-0202-B00
  • E-Vocal ARS-0202-A11
  • E-Vocal ARS-0202-B11

E-Vocal ARS-0202-B11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an SFP connector for a Fiber interface if you choose to extend the connection distance and can be powered by 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

    I/O Interfaces