Dante-enabled Product Catalog

NAJA A201、DA201是一款桌面阵列麦克风，A201是模拟接口；DA201是内置 Dante 和 PoE 模块，可以直接接入 Dante 网络，为点对点的音频连接提供一种低延时、高保真和低成本的解决方案。

Dante PoE吸顶音箱

Dante PoE吸顶音箱

EAGLE DP6音箱的音频传送采用Dante传输，实现数字化、网络化的传输管理。Dante是基于3层的IP网络技术，采用Dante协议，简化了网络的运行模式，可实现双向高质量大数据远距离传输，低延时完美实现同步播放，设备即插即用，系统搭建没有拓扑限制，安装配置非常方便，布线简单。

Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。

Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。

Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。

Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。

NAJA Y201、DY201系列产品是鹅颈麦克，NAJA Y201系列支持模拟信号输入，NAJA DY201是Dante网络麦克风，可实现模拟音频信号转为数字音频信号，支持PoE供电和Dante网络信号传输。

The FA-9600 dual channel signal processor simplifies all types of video conversion and offers a wide range of audio processing.

The FA-9600 is much more than a basic frame synchronizer. With optional expansion cards and software, the unit offers MADI/Dante/analog audio I/O, 12G-SDI/Quad Link 3G-SDI I/O, up/down/cross conversion, HDR/SDR conversion, and SFP+ module support.

・ 3G/HD/SD-SDI 2 inputs and 2 outputs with distribution output by each output, HDMI 1 input and 1 output.

・ Dual channel of frame sync, proc amp, colorimetry converter, color corrector, frame delay and clip function.

・ Dual channel embedded audio (16 channels, HDMI is up to 8 channels); AES/EBU I/O selectable for 4 inputs, 2 inputs/2outputs, or 4 outputs. (4 channels of stereo, unbalanced); audio multiplex and demultiplex function.

・ Gain control, SRC, down mix, re-map, mute, and audio delay functions.

・ Optional audio interface cards are available: AES/EBU I/O, analog audio I/O, MADI interface, or Dante interface.

The RX-V4.1 series of Restmoment's 4th generation digital conference system adopts Restmoment's new generation of digital conference technology, which conforms to the international digital conference standard. The system supports network control, DANTE audio input and output, remote conferencing, audio eight input and eight output (with partition output), independent tone, etc.

Sennheiser MobileConnect streams audio content via WiFi live and in superior quality to any mobile device. Following the Bring-Your-Own-Device concept, it is an easy-to-use and intuitive Assistive Listening system. Cost and maintenance effort for operators is kept at a minimum.

MobileConnect is optimized for use in existing network infrastructures. The MobileConnect system consists of three components: the MobileConnect Station, the MobileConnect Manager and the MobileConnect App. The MobileConnect Station is integrated into the existing campus network and distributes the audio content via WiFi to the MobileConnect App on the user‘s personal smartphone. With the MobileConnect Manager, all MobileConnect Stations in the network can be administrated conveniently and managed remotely from anywhere on the campus.

H1 includes in a half-rack format:

1. A Dante™/AES67 Audinate Brooklyn II module
2. An audio matrix
3. A external slot to insert all AxC cards from Auvitran.
4. A manageable L2 Ethernet switch

H1 makes easy the bridging between Dante™/AES67 and various digital audio formats (AES3, MADI,…) , AVB-MILAN as well. With a Mic/Line analog card, H1 becomes an high quality noiseless compact stage box. The integrated low latency audio matrix connects independently the audio channels on both sides of the bridge. AVS monitor software allows to configure the audio core and the switch (Groups, Transmit ports, Q.O.S, link redundancy,…) in a unique workflow. Integrated into a global network, H1 provides a dual-service functionality as a managed network switch and an audio end-point .As a convergent and modular tool, H1 save rack space, expand the possibilities and improves the job for money ratio with an all-in-one design. In addition, lighting communication protocols (ArtNet, MANet, SaCN,…) are supported.
H1 is supplied with rack mounting parts. As options, you will find a wall-mounting kit and a truss-mounting kit.

Like all AGORA products, fiber optic and internal redundant power supply options are available.

Built upon Intel^® SDM platform the BirdDog SDM Family will revolutionise the way content is distributed to even the largest installations. Simply install the SDM module inside an SDM compatible flat panel display for the most integrated and scalable NDI^® to screen solution available. No more wall boxes or patch panels, now the AV distribution is built directly into the display.

Controlled by the all in one BirdDog OS and with two BirdDog SDM modules to choose from, M1 an M2, there is a solution for every project. M1 is a full NDI Sender and Receiver based on the Intel SDM-L form factor and M2 is an NDI Receiver built on the Intel^® SDM-S module. With support for resolutions all the way up to 4Kp60, there is also a RESTful API for programming completely automated spaces.

M2 is an NDI^® Receiver module based upon the Intel^® SDM-S module. Receive NDI^® from anywhere on the network to display on screen.

Built upon Intel^® SDM platform the BirdDog SDM Family will revolutionise the way content is distributed to even the largest installations. Simply install the SDM module inside an SDM compatible flat panel display for the most integrated and scalable NDI^® to screen solution available. No more wall boxes or patch panels, now the AV distribution is built directly into the display.

Controlled by the all in one BirdDog OS and with two BirdDog SDM modules to choose from, M1 an M2, there is a solution for every project. M1 is a full NDI Sender and Receiver based on the Intel SDM-L form factor and M2 is an NDI Receiver built on the Intel^® SDM-S module. With support for resolutions all the way up to 4Kp60, there is also a RESTful API for programming completely automated spaces.

M1 is an NDI^® Sender and Receiver module based upon the Intel^® SDM-L module. Receive NDI^® from anywhere on the network to display on screen. With the Send function you can plug a source such as a laptop in and then duplicate that across any number of additional BirdDog Display activated screens.

The Smart pi EDC is a partnership with EDC Acoustics to integrate EDC’s Plane Array™ technology which allows systems the ability to create 3D wave fronts. Each speaker is capable of vertical and/or horizontal steering as well as customizable wave shaping, allowing re-configurable pattern control to suit any venue or area further increasing speech intelligibility in difficult acoustic environments.

The Smart pi DVA is an Automatic (Digital Voice Announcement) system and is perfect for the transport industry. Incorporating a web-based GUI with mobile support that is easy to operate, with multi-language support, text to speech engine and more. Messages are clear and understood, every time with a built in scheduler, GTFS and GTFS-R support simple integration for automated announcements have never been this easy.

The Smart pi NAM (Network Amplifier Modules) are commercial and industrial amplifiers that can be installed in the field and close to the speaker location, this allows ease of changing audio zoning, sources, priorities and volume for every single speaker within the system. Each NAM has 4 x 12-Watt RMS class D amplifiers, an Ethernet switch with 2 fibre and 2 ethernet ports, and built in DSP (EQ, FIR, delay and gain). The NAM-HP has 4 x 75-Watt RMS class D amplifiers further offering the ability to incorporate TCoil and induction loops into PA systems for the hearing impaired.

The Smart pi DSP (Digital Signal Processor) is the next generation of digital PA processor with massive audio processing ability that can support the smallest to the very largest of systems. The Smart pi DSP is completely modular and future upgradeable via simple firmware updates. It is based on industry standards including Dante and OCA/AES70. The hardware comes in a 1RU Node or 2RU SuperNode format being able to manage up to 384 zones in a single unit.

The Network Amplifier Modules (NAM) is a high quality, highly versatile amplifier. With 4 versions available, 2 x Indoor Units and 2 x Outdoor Units, there is a NAM for almost any requirement.
Outdoor (IP66) units can be installed in the field near the location of the speakers for Railway Stations and other outdoor venues, whilst indoor NAMs can be installed neatly in the ceiling or on a wall inside.

There are two power options available with each standard power NAM having 4 x 12 Watt RMS class D amplifier channels and the High Power (NAM-HP), 4 x 50 Watt RMS class D amplifier channels, both units have an Ethernet switch and built in DSP (EQ, FIR, delay and gain). Each amplifier has an individual Dante input allowing for simple zoning and future changes.

EasyIP TableMIC D microphones connect to audio systems that utilize Dante networked audio signals. With 360-degree coverage from three unidirectional condenser microphone elements, a single EasyIP TableMIC D microphone provides excellent coverage for a small meeting room.

Designed to reduce distracting noises that arise in the conference room, the microphone’s solid metal base construction and engineered feet diminish table vibration noise that other table microphones experience. Each of the three unidirectional cardioid microphone elements in the microphone is equipped with integrated echo cancellation and Digital Signal Processing (DSP), including equalization, automatic gain control (AGC), and adaptive noise filtering.

Up to four EasyIP TableMIC D microphones can be paired with the popular EasyIP Mixer and AV Bridge 2x1 products. Pairing with Vaddio equipment can be done through our free Vaddio Deployment Tool and audio flows are managed through Audinate’s Dante Controller application.

The GDP 1132 Dante offers you efficiently the possibility to connect the “Analog world” with the Dante Network. With the new GDP 1132 Dante, you can now patch your Dante signals, add effortless 16 analogs inputs to your Dante network or extract 16 Dante channels as analog outputs, just by simple patching.

The GDP 1132 Dante is not only a patching solution as it enable you also to mix all signals. These newly mixed signals are then available to be fed into your Dante Network.

Through its front display and navigation knobs, there is no need for a Dante Controller. Furthermore, monitoring, mixing and configuration can be made either from the front display or via a remote web browser.
The GDP 1132 Dante is a 19”, 1 RU device, its assembly depth is 220 mm, which make it very interesting for integration in tight spaces, such as OB-Vans

DA22 supports Dante and AES digital audio interface protocol, which can realize two-way transmission of digital audio signals via XLR cable.

Features

· Compact design, easy to use, supports hot-plug;

· Easily and freely convert between analog audio signal and DanteTM digital audio signal;

· Built-in 2 input or 2 output audio channels;

· Extends audio, control, Ethernet, and power over a single affordable network cable.

· Replaces multiple analog or multi-core cables with only a network cable, cost-effective, versatile;

· Extends uncompressed high-quality audio signal with near-zero latency;

· Transmits high quality 2-channel audio safely and reliably;

· Perfectly supports Dante software, the network and audio routing can be easily expanded andreconfigured with just a few mouse clicks;

Ostrich series of products is an audio interface device based on Dante international general protocol. It can realize analog audio signal input, convert to digital audio signal output, route to any Dante audio transmission network device by Dante protocol, and realize high quality, long distance and low delay signal transmission. It supports the access of any Dante network digital audio, which can be converted into analog audio signal output, and can be connected to traditional analog audio devices such as mixer, power amplifier, processor and so on. The device uses high quality AD/DA signal conversion chip, provides 48 V of phantom power supply, and can access higher quality capacitive microphone.

Ostrich series of products is an audio interface device based on Dante international general protocol. It can realize analog audio signal input, convert to digital audio signal output, route to any Dante audio transmission network device by Dante protocol, and realize high quality, long distance and low delay signal transmission. It supports the access of any Dante network digital audio, which can be converted into analog audio signal output, and can be connected to traditional analog audio devices such as mixer, power amplifier, processor and so on. The device uses high quality AD/DA signal conversion chip, provides 48 V of phantom power supply, and can access higher quality capacitive microphone.

Dante NDI Bridge is a Windows 10 application for flipping audio tracks between NDI^® and Dante^®. With support for up to 3 stereo pairs, Dante NDI Bridge can receive 3 NDI^® streams and create 3 stereo pairs of Dante^® audio, or receive a single NDI^® stream and create 3 Dante^® stereo audio pairs. All this in sub-frame latency and of course the same applies in reverse.

[Model:MNS-DANTE-I2S-T-02-1P]: For networked audio transmitter products requiring 2 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.