Dante-enabled Product Catalog

Yamaha Unified Communications RM-CR is the audio signal processor at the heart of the RM series. Standard network audio support for "Dante" all compatible devices can be connected with single network cable. Up to 2 RM-CG and 2 VXL1B-16P can be connected via PoE switch SWR2311P-10G. It can automatically recognize connected devices on the same network for audio routing and is equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment as well as Auto Mixer functions that automatically mix the audio of all connected microphones with various input/output connections such as USB, VoIP, analog, and Bluetooth.

The Yamaha RM-CG is a ceiling array microphone equipped with unique audio signal processing technology that enables high-quality communication.

E-Vocal Stage Series are the converters designed to transfer 16 audio channels over a Dante network in both directions. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. This robust and portable unit is designed to be placed horizontally or vertically on stage, providing impeccable integration and ability to endure harsh live performance environment. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. ARS-1616S-A10 also featured with Preamp (phantom Power), gain control and mute functions.

It’s here: Video for Dante™/AES67 – Visionary Solutions brings the power of Dante™/AES67 enabled connectivity to video. For Installed AV professionals, the impact of Dante™/AES67 connectivity has been a game-changer, enabling fast, easy, and economical digital networking of multi-channel audio over IP.

Wouldn’t it be great if there was a Dante™/AES67 solution for video? Introducing PacketAV Duet from Visionary Solutions.

PacketAV Duet is nothing short of a paradigm shift for networked AV. True convergence is finally here; a single platform to support Dante™/AES67 and Video over IP. Integrate 4K UHD video over IP into your Dante™ enabled audio network and bypass the constraints of traditional switch matrix systems by harnessing the flexibility and scalability of converged IP networks.

It’s here: Video for Dante™/AES67 – Visionary Solutions brings the power of Dante™/AES67 enabled connectivity to video. For Installed AV professionals, the impact of Dante™/AES67 connectivity has been a game-changer, enabling fast, easy, and economical digital networking of multi-channel audio over IP.

Wouldn’t it be great if there was a Dante™/AES67 solution for video? Introducing PacketAV Duet from Visionary Solutions.

PacketAV Duet is nothing short of a paradigm shift for networked AV. True convergence is finally here; a single platform to support Dante™/AES67 and Video over IP. Integrate 4K UHD video over IP into your Dante™ enabled audio network and bypass the constraints of traditional switch matrix systems by harnessing the flexibility and scalability of converged IP networks.

The PacketAV® Duet Wallplate Encoder has been nothing short of a paradigm shift for networked AV. True convergence; a single platform to support Dante™/AES67 and Video over IP in a convenient wallplate form-factor. Building on their success and wide adoption, the next generation of PacketAV® Duet Wallplate Encoders continue to provide powerful 4K UHD Video and Dante™/AES67 Audio over a single Gigabit Ethernet port, now with built-in bi-directional Bluetooth® wireless audio connectivity and other enhanced features.

It can be easily mounted in a wall, tabletop, lectern, or floor box using a standard 2-gang US or UK back box, and connected to power (standard POE) and Ethernet using only a single category cable.

The PacketAV® Duet Wallplate Encoder has been nothing short of a paradigm shift for networked AV. True convergence; a single platform to support Dante™/AES67 and Video over IP in a convenient wallplate form-factor. Building on their success and wide adoption, the next generation of PacketAV® Duet Wallplate Encoders continue to provide powerful 4K UHD Video and Dante™ /AES67 Audio over a single Gigabit Ethernet port, now in a simplified HDMI only version for streamlined installations.

The Zip4-3G four-zone Dante/AES67 paging interface addresses the unique communications needs of large sporting venues, transit hubs like airport terminals and train stations, as well as convention centers and corporate facilities. Paging audio and bi-directional control and status data can be routed over a Dante or AES67 network to the Q-SYS Ecosystem, third-party network AV system or other Paging Management System controller to distribute paging audio to up to four different zones. Finally, it allows for a gooseneck paging microphone.

The Attero Tech by QSC DTH1620 is multi-channel, low-power (16-channel x 20 watts) Dante/AES67 network amplifier, designed for themed entertainment usage and other specialized audio applications, and optimized for integration into the Q-SYS Ecosystem.

The Attero Tech by QSC Axon D2i is a single-gang, Dante/AES67 network audio I/O wallplate for network AV systems, including the Q-SYS Ecosystem. With two balanced mic/line inputs in a cost-effective form-factor, it provides easy integration of analog devices into a wide range of network audio applications. A Q-SYS Extension further simplifies integration, letting integrators quickly add the Axon D2i to Q-SYS installations without the need for any programming.

SNA50-3 is a global limiter. The technology used for the sound limitation does not degrade the signal dynamics at all, as a traditional compressor would do.

The pressure measurement by the acoustic sensor is transmitted to the computer which integrates the modulation peaks with a progressive slope, adjustable in rise and fall time.

• Balanced inputs/outputs compatible unbalanced.

• Limitation in global level.

• Limitation either by acoustic sensor or by electrical analysis of the input signal to SNA50-3, while keeping the acoustic level measurement for the history.

• Visualization of the levels and parameters on a touch screen on the front panel.

• Real-time display of the Leq1s in global level.

• Choice of A and/or C weighting for the acoustic analysis of the global level, the C weighting allows the bass to be taken into account.

• Recording of global levels: LAeq 1min, LAeq 10min, LAeq 15min, LCeq 1min, LCeq 10min, LCeq 15min, LpcC1min max.

• Automatic summer/winter time change-over.

• Embedded web server for history consultation and setting equipment.

• No specific software required.

• The internal memory is sized to store sound level values 24 hours a day, 7 days a week for 6 months.

• USB Host connector allowing the connection of a USB key for history collection.

• Fire contact with audio level attenuation > 40dB.

• Acoustic and electric auto-verification of the measuring sensor.

• VCA technology (Voltage Controlled Amplifier), no audio signal cut-off.

• SNA50-3 can be sealed.

The Attero Tech by QSC Zip4 is a four-zone Dante/AES67 paging interface that addresses the unique communications needs of large sporting venues, transit hubs like airport terminals and train stations, as well as convention centers and corporate facilities. Paging audio and bi-directional control status data can be routed over a Dante or AES67 network to the Q-SYS Ecosystem, third-party network AV system or other Paging Management System controllers to distribute paging audio in up to four zones.

Bella 22 is a 2 buss summing matrix confidence monitor designed for outside broadcast trucks, studios, theatre and professional audio applications. It is perfect for easy and cost effective monitoring of multiple network audio sources, ideal for busy production environments and perfect for monitoring multiple network intercom & programme feeds.

The 2 front panel loudspeakers are driven from a DSP to compensate for their size. The result is surprisingly good, with clear crisp vocals and highly intelligible reproduction of wider band audio sources. They are driven from a class D amplifier and have more than sufficient output level for most environments.

Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.

Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio & broadcast headphones.

Packaged in a small & robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones.

The Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).

Virgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume.

Three mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the users headphones. Needing just 1 single network cable to carry both power & audio to the Virgil makes installation very simple.

As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil suitable for driving television presenters ear pieces.

This device uses Audinate's Ultimo Chipset, which can receive 4 incoming audio channels, each at 48kHz. However, this chipset can only receive these 4 audio channels from a maximum of 2 network locations (2 different devices). This is common with any manufacturer that uses this chipset.

The Beatrice W4 is a single user interface for the Beatrice system, designed to mount flush on a wall or into a desk. it is a useful intercom position allowing two way communication to be possible at standing levels whilst mounted into walls, or at desk level if mounted on a Desk.

MinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.

MinFerno is designed for a single commentator/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.

The MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works. It is built to our exacting, rugged & robust standard to make it a reliable piece of broadcast equipment for the busy engineer.

MinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.

MinFerno is designed for a single commentator/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.

The MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works. It is built to our exacting, rugged & robust standard to make it a reliable piece of broadcast equipment for the busy engineer.

MinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.

MinFerno is designed for a single commentator/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.

The MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works. It is built to our exacting, rugged & robust standard to make it a reliable piece of broadcast equipment for the busy engineer.

Audinate Brooklyn II Dante Module based design

32 In / 32 Out operation at all supported H9000 sample rates

Sample Rate Clock Sources: Brooklyn II Module, Dante network, H9000

AES67 Support

Either 2 Primary and 2 Redundant Networks Connections or 4 Primary Network Connections

Can reside in any H9000 Option Slot

SoundTube's new IPD Hub 2 Extender Box for adding onto a Hub 2 local system. Connect up to 5 IPD Hub 2 amplifiers to an extender box. The IPD Hub 2 utilizes a Dante infrastructure for flexible audio distribution. The amp is complete with local and Dante inputs and local and network control to address requirements for commercial audio connectivity in numerous scalable systems such as retail, bar, restaurants, hospitality, spas, education facilities, and more.

One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 64 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 85.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480, UL 2043 and EN54-24 listed.

One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 in. (0.9 mm) to 1.6 in. (40.6 mm). UL 1480 and 2043 listed.

One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 55 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 86.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

Offering an economical option for expansion of audio coverage in a digital speaker system, this Dante®-enabled coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube®'s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Color-coded (green) tile bridge, UL listed conduit clamp and paint shield are included.

Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

DPanel 系列墙面接口机，其拥有模拟输入和 Dante 数字输入，模拟线路输出和 Dante 数字输出，模拟输入支持幻象供电以及手动前级增益调节。

DCORE系列网络音频服务器是针对Dante开发的DSP处理设备，仅有Dante的数字信号处理，无模拟信号处理。将其接入Dante网络中即可实现音频信号的网络传输与处理。最大支持64×64，采用模块化配置，信号处理更加高效，支持噪声消除算 法（AFC)、支持回声消除算法（AEC)、支持噪声消除算法（ANC)。支持最多64路输入输出通道的矩阵混音和16路全功能信号处理。