AMK – DT82-A-X


More details

Similar Products

lucky-tone-dante-dp-430-poe-dsp
  • Lucky Tone

Lucky Tone – Dante DP 430

Lucky Tone's Dante DP 430 is a 30W Dante Wall Speaker with DPS, POE or External 24V DC power supply for outdoor and half outdoor applications. Lucky Tone's Dante DP 430 DP PoE Speaker can realize its multifunction the POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz)and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.
    Speakers
vue-audiotechnik-es-269
  • VUE Audiotechnik

VUE Audiotechnik – es-269

The es-269 compact ACM subwoofer system redefines small subwoofer capabilities by producing high output exceptionally high-quality sound from a very compact dual driver system.  The es-269 compact ACM subwoofer system redefines small subwoofer capabilities by producing high output exceptionally high-quality sound from a very compact dual driver system. With reference quality flat low-end response from 200 to 45 Hz, the es-269 is capable of output levels of systems typically twice the size. The es-269 apples VUE’s patent-pending ACM -Active Compliance Management- technology from the hm-class subwoofers, to a new compact even “mini” subwoofer breaking the normal size ratio to SPL output standards. ACM technology combines both band-pass and vented alignments into a single enclosure. The s-269 places two high performance, 6×9-inch transducers into this configuration, with both woofers sharing a common vented chamber. One woofer’s frontal radiation is direct, while the second woofer’s frontal radiation drives the band-pass chamber. Using sophisticated DSP the two ACM subsections combine acoustically precisely aligning the phase arrivals of the front facing woofer, the common chamber vent, and output of the bandpass chamber vent. The powerful amplifier sends 200W of pure sine wave power (350W “burst”) with a unique optimized signal to each woofer. The combination of 700 watts of burst power produces over 124 dB peak output in a half space environment (ground stacked). The combination of ACM, precision-engineered transducers, and sophisticated electronics allows the s-269 to deliver much higher output throughout its operating bandwidth from a remarkably small enclosure. Features
  • Exceptionally low front profile: Architect-pleasing design with esoteric audiophile quality and professional audio output down to 40 Hz
  • ACM (Active Compliance Management): Patent-pending hybrid design combines both band-pass and vented alignments into a single, compact footprint for more output and definition.
  • Very low distortion with professional sound pressure output
  • Innovative Purpose-designed dual 6×9-inch high output cone transducers
  • Premium birch plywood enclosure with extensive internal bracing and a highly-durable Dura Coat finish.
  • Specially designed for use with the VUEDrive V242 Systems  Engine to provide a new level of sonic accuracy and output
  • Flexible mounting bracket allows fixed installation on the wall or to the ceiling
    Speakers
MTL315-10a
  • DMIX

DMIX – MTL315-10a

Product model: MTL315-10a Product type: 15 "three-way line array active speaker MHF init: 4 "coaxial mid high frequency unit LF init: 15 "bass unit Frequency response: 40Hz-18kHz Rated power: LF: 600W, MHF: 150W Sensitivity: LF: 102dB, MHF: 110dB Maximum SPL: LF: 136dB(peak), MHF: 142dB(peak) Radiation angle: 100° ×10°,adjustable Rated impedance: LF: 8Ω , HF: 8Ω Dimensions (W x H x D): 760×388×595 (W×H×D) Module parameters Module model: NX603LCD Dante module Amplifier power: HF: 300W, LF: 1000W/8 Ω (Class D) Input link: 2 balanced XLR inputs or 2 AES inputs, one set of Dante signal input and output DSP control: RS485、USB、DANTE
    Speakers
  • Dante Ch: 2x2
  • 24-bit