Dante-enabled Product Catalog

Technical parameters：

Speaker model: CA-412DA

Speaker type: Active Speaker

Unit composition: 12×4" Full frequency unit

Frequency response: 90Hz-17kHz （-10dB）

Sensitivity: 98dB

Rated impedance: 6Ω

Sound pressure level: 130dB（peak）

Rated power: 360W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

Technical parameters：

Speaker model: CNET6D

Speaker type: 6.5" Active two-division loudspeaker

Unit configuration: 6.5"(165mm) woofer 1"(25mm) Treble driver

Frequency response: 100Hz-18kHz

Rated power: 50W

Sound pressure level: 113dB

Sensitivity: 89dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

Technical parameters：

Speaker model: CNET8D

Speaker type: 8" Active two-division loudspeaker

Unit configuration: 8"(200mm) woofer 1"(25mm) Treble driver

Frequency response: 80Hz-19kHz

Rated power: 100W

Sound pressure level: 115dB

Sensitivity: 92dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 250×391×235 (W×H×D)

Technical parameters：

Speaker model: CNET10D

Speaker type: 10" Active two-division loudspeaker

Unit configuration: 10"(250mm) woofer 1.5"(34mm) Treble driver

Frequency response: 70Hz-20kHz

Rated power: 120W

Sound pressure level: 116dB

Sensitivity: 90dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×70°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 200W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 308×480×290 (W×H×D)

Technical parameters：

Speaker model: CNET12D

Speaker type: 12" Active two-division loudspeaker

Unit configuration: 12"(300mm) woofer 1.75"(44mm) Treble driver

Frequency response: 65Hz-19kHz

Rated power: 300W

Sound pressure level: 129dB

Sensitivity: 98dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×50°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 600W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 385×571×365 (W×H×D)

Technical parameters：

Speaker model: CA-401D

Unit configuration: 1×4"(100mm) Full frequency unit

Frequency range: 120Hz-20kHz

Rated power: 30W

Sound pressure level: 110dB

Sensitivity: 90dB

Coverage Angle: 100°×90°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 145×253×180 (W×H×D)

Technical parameters：

Speaker model: CA-402D

Unit configuration: 2×4"(100mm) Full frequency unit

Frequency range: 110Hz-20kHz

Rated power: 60W

Sound pressure level: 113dB

Sensitivity: 93dB

Coverage Angle: 100°×60°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 145×344×180 (W×H×D)

Technical parameters：

Speaker model: CA-306D

Unit configuration: 6×3"(75mm) Full frequency unit

Frequency range: 130Hz-20kHz

Rated power: 120W

Sound pressure level: 118dB

Sensitivity: 95dB

Coverage Angle: 100°×50°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 124×548×154 (W×H×D)

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-4D

Unit configuration: 4"(100mm) Speaker unit

Frequency range: 125Hz-20kHz

Rated power: 30W

Sound pressure level: 108dB

Sensitivity: 91dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 204×185 (Ф×H)

Opening size (mm) : Ф169

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-6D

Unit configuration: 6.5"(165mm) Speaker unit，1" Tweeter

Frequency range: 95Hz-20kHz

Rated power: 50W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 264×210 (Ф×H)

Opening size (mm) : Ф221

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-8D

Unit configuration: 8"(200mm) Speaker unit，1" Tweeter

Frequency range: 100Hz-18kHz

Rated power: 60W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 281×247(Ф×H)

Opening size (mm) : Ф245

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q10i

Product type: Two channel DSP digital power amplifier

8 Ω power: 300W X2

4 Ω power: 600W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 100-240V

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q20i

Product type: Two channel DSP digital power amplifier

8 Ω power: 600W X2

4 Ω power: 1200W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 100V-240V

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q40i

Product type: Two channel DSP digital power amplifier

8 Ω power: 1000W X2

4 Ω power: 2000W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <1%

Damping coefficient： 200

Signal to noise ratio： 102

Working voltage： 180V-240V

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q60i

Product type: Two channel DSP digital power amplifier

8 Ω power: 1500W X2

4 Ω power: 2500W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <1%

Damping coefficient： 200

Signal to noise ratio： 102

Working voltage： 180V-240V

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q1200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 300W X4

4 Ω power: 600W X4

Analog maximum input： 22dBu

AES maximum input： 0dBS

Dante input： 48k

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 180-240V

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q2400i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 600W X4

4 Ω power: 1000W X4

Analog maximum input： 22dBu

AES maximum input： 0dBS

Dante input： 48k

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 180V-240V

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q3200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×800W

4 Ω power: 4×1200W

2 Ω power: 4×1500W

Bridge: 4×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q6000i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×1500W

4 Ω power: 4×2500W

2 Ω power: 2×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

The SLB 115A is a small active compact line array speaker system designed to achieve high fidelity and ultra high definition amplification in small and medium sized applications. Lightweight and flexible with excellent performance, compact box design and special mounting components make installation easy and quick.

The SLB 115A active Linear array ULTRA-low frequency speaker has a built-in three-channel power amplifier module with a high-performance digital signal processing system. Two full-frequency channels drive the system with three SLA 206, and the remaining channel drives the ULTRA-low frequency SLB 115A. With two balanced line input and one signal output port, plus one power input and output port, fully meet the use requirements, but also convenient system expansion. With the high performance 2 in 3 out DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 115A uses a high-efficiency class D power amplifier design, a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in a high energy conversion efficiency of up to 2x700W+1800W, while being compact and stable in performance.

The SLB 118A has a built-in power amplifier with a high-performance digital signal processing system, two full-frequency channel drive systems with two or three SLA 110 single 10-inch line array speakers (preferably two), and one channel drive the SLB 118A. Two balanced line input and one signal output ports, plus one power input and output ports, fully meet the use requirements, but also convenient system expansion. With high performance DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 118A uses an efficient class D power amplifier module with a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in high energy conversion efficiency of up to 2X700W+1800W, compact size and stable performance.

Rich accessory package, including adjustable height support rod, speaker cable, power cord, convenient system quick connection.

Speaker model: MLA 208a

Speaker type: Dual 8 "dichotomous active line array loudspeakers

Unit configuration: LF: 2×8"woofer 2"(50mm) Voice coil

HF: 2×1.4"(34mm) Voice coil high frequency driver

Frequency response: 75Hz-19kHz (-10dB)

Rated power: LF: 300W , HF: 60W

Sensitivity: LF: 98dB , HF: 107dB

Sound pressure level： 130dB (peak)

Radiation Angle: 110°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×259×416 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

Speaker model: MLA 210a

Speaker type: Dual 10 "two frequency active line array loudspeakers

Unit configuration: LF: 2×10" woofer 2.5"(65mm）Voice coil

HF: 1×3"(75mm) Voice coil high frequency driver

Frequency response: 55Hz-20kHz (-10dB)

Rated power: LF: 600W , HF: 90W

Sensitivity: LF: 99dB , HF: 110dB

Sound pressure level： 136dB (peak)

Radiation Angle: 100°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×294×547 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

Speaker model: MLB 118a

Speaker type: 18 "low frequency active line array speaker

Unit configuration: LF: 18" woofer 4"(100mm）Voice coil

Frequency response: 35Hz-200Hz (-10dB)

Rated power: LF: 600W

Sensitivity: LF: 98dB

Sound pressure level： 133dB (peak)

Radiation Angle: DSP control

Crossover point: 740×515×720 (W×H×D)

Size (mm) : 2000W (Class D) 4Ω

Module amplifier power: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module input link: RS485、USB or Dante

Power amplifier:

Rated power (EIAJTHD=1%,1KHZ) ： 8Ω: 1200W+1200W 4 Ω: 1600W+1600W

RMS output voltage (THD=1%,1KHZ)：98V 8 Ω

THD+N (10% power rating) ：<1%

Imd-smpte (10% power rating) ：<0.5%

Frequency response：-0.5dB 1dB 20-20khz

SNR：>95dB >98dB

Power input: 220-240VAC 50/60Hz

Speaker model: GLA 312a

Speaker category: Dual 12 "Active triplex array speakers

Unit configuration: HF：3x1.7" Treble driver MF：1x10" MF unit LF：2x12" woofer

Frequency response: 55Hz-20KHz (-10dB)

Rated power: MHF：400W LF：700W

Sensitivity: MHF：105dB LF：102dB

Nominal impedance: MHF：8Ω LF：8Ω

Coverage Angle (H x V) : 120° x 10°，Vertical adjustable

Sound pressure level MHF: 139dB LF: 136dB（peak）

Power amplifier: 1500W+1500W

Size (mm) : 1138x381x645（WxHxD）

Power amplifier:

Rated power (EIAJTHD=1%,1KHZ) ： 8Ω: 1200W+1200W 4 Ω: 1600W+1600W

RMS output voltage (THD=1%,1KHZ)：98V 8 Ω

THD+N (10% power rating) ：<1%

Imd-smpte (10% power rating) ：<0.5%

Frequency response：-0.5dB 1dB 20-20khz

SNR：>95dB >98dB

Power input: 220-240VAC 50/60Hz

Speaker model: GLA 312a

Speaker category: Dual 18 "active bass reflex ULTRA-low frequency speakers

Unit configuration: 2x18"(460mm）woofer

Frequency response: 40Hz-200Hz(-10dB)

Rated power: 2000W

Sensitivity: 99dB

Nominal impedance: 4Ω

Sound pressure level 139dB（peak）

Power amplifier: 1500W+1500W

Size (mm) : 1066x561x798（WxHxD）

Speaker model: CX108P

Speaker type: 8”Active coaxial loudspeaker

Unit configuration: LF: 8" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 80Hz-20kHz(-10dB)

Rated power: LF: 140W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 121dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 344×270×256 (W×H×D)

Module amplifier power: HF：100W，LF：200W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante