Dante-enabled Product Catalog

2–Channel Dante Decoder & PoE Acceptor

• PoE Acceptor.
• Output Volume Control.
• Control — Dante IP Control Matrix and Kramer Protocol 3000.

The Topp Pro RTDLM808 is an 8x8 digital matrix with gating, compression, expansion, delay, and crossover capabilities.

The CEDAR DNS 8D has been designed specifically for broadcast and live sound. With eight channels of noise suppression, it hosts a new algorithm that marries the best of the machine learning and signal processing on which the DNS 8 Live and the DNS 2 dialogue noise suppressors are based. CEDAR's Dialogue Noise Suppression technology is the standard for removing background noise from dialogue in studios. With near-zero latency, high-resolution processing, and a fast, intuitive user interface, it eliminates traffic noise, air conditioning, wind, rain, babble and general background noise from audio signals. It will also help to compensate for unfavourable acoustic conditions and poor microphone placement, and will even suppress excessive reverberation. The CEDAR DNS 8D has been designed specifically for broadcast and live sound. With eight channels of noise suppression, it hosts a new algorithm that marries the best of the machine learning and signal processing on which the DNS 8 Live and the DNS 2 dialogue noise suppressors are based. With its slick user-interface that includes standard and detailed modes of operation it offers better control than any previous dialogue noise suppressor, both from the front panel and from almost any web browser that can access its internal remote control software. With its near-zero latency and standard 4-pin 12VDC input in addition to universal mains power, it's suitable for use in all live situations - not just broadcasting, but also live sound in venues such as theatres, concert halls, conferences venues, and places of worship. Dante® is the de-facto standard for media networking, distributing uncompressed, multi-channel digital audio via standard Ethernet networks with near-zero latency and perfect synchronisation. The DNS 8D is the first DNS with a Dante interface in addition to its AES3 audio connections (DB25 using the AES59 pin-out). With fail-safe AES3 audio bypass implemented in the form of hardware relays that immediately connect the inputs to the outputs in the event of a power failure or other significant disruption plus support for Dante's redundant mode of operation which helps to protect against network failure, it can be installed with confidence in critical paths anywhere within the audio chain.

E-Vocal ARS-1616-Stage is a multiple channel analog input and analog output Dante-equipped stage box. This ruggedized unit is a 4U rackmount equipped with analogue converters designed to transfer 16 audio channels over a Dante network in both directions. Features: ‧ 16 analog channels input/output ‧ Robust and portable Stage box ‧ Placed horizontally or vertically . 2 LAN etherCON connectors for redundancy ‧ 96 kHz, 24 bit resolution ‧ Dual AC input and dual PoE power sources for redundancy ‧ Built-in web-based controller

DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall. High quality CLASS-D 4CH Professional Amplifier DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall.   4CH Dante™ Digital Audio Input You can input 4CH Dante™ digital audio through the network port and 4CH analog audio inputs.   Built-in DSP Parametric 8 band EQ, crossover filtear using HPF and LPF,delay, attack / release adjustable limiter.   Easy control of equipment through front panel with OLED and PC GUI Using OLED and operation switches installed on the front, and DSA-500Q dedicated software, various parameters can be adjusted.   Easy one-touch front dust filter cleaning It is possible to remove the front dust filter easily by separating the ventilator on the front of the equipment by one-touch method.   Simultaneous control of multiple amplifiers via PC GUI The PC GUI allows intuitive manipulation of various functions of the DSP, and simultaneous control of multiple amplifiers through IP registration of the equipments.   Up to 340 ms delay time adjustable When configuring a system with multiple speakers, you can adjust the Delay function to control the audio transmission time up to 340 msec for clear sound.   Frequency band adjustment using HPF and LPF You can use the Butterworth / Bassel / Linkwithz-Riley filter to adjust the frequency band required for your speakers.   Unlimited preset creation for environment-optimization Up to 10 presets can be saved to the internal memory of the device. In addition, environment parameters can be saved to a PC as a file via the PC GUI and can be easily managed without restriction on the number of files.

DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors. It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

IQOYA SERV/LINK is a high density 1U rack multi-channel IP audio codec designed for live remote broadcasts or program distribution over IP networks. It supports from 4 to 64 stereo (8 to 128 mono) input and output channels with the possibility to simultaneously encode, decode and transcode IP audio streams. IQOYA *SERV/LINK handles  up to 64 stereo (128 mono) input and output channels in 1U, with the possibility to simultaneous encode and stream the audio inputs at multiple formats and protocols, decode IP audio streams to the outputs, and transcode IP audio streams. It features two hot swappable redundant PSU, two Ethernet ports,  and supports different types of audio I/Os (AES/EBUs, or analog, or MADI, or AES67/RAVENNA, or AES67/RAVENNA and MADI). IQOYA *SERV/LINK can be fully controlled and monitored from its embedded WEB pages and through SNMP.

A terrific complement for any full-range loudspeaker and the perfect companion for the PreSonus® CDL12 Constant Directivity loudspeaker, the CDL18s delivers a tight, coherent low-end, driven by an integrated 1000-watt Class D power amp, and features a unique ported design that maximizes efficiency in a compact form-factor. A terrific complement for any full-range loudspeaker and the perfect companion for the PreSonus® CDL12 Constant Directivity loudspeaker, the CDL18s delivers a tight, coherent low-end, driven by an integrated 1000-watt Class D power amp, and features a unique ported design that maximizes efficiency in a compact form-factor. The Dante®-enabled CDL18s provides the articulate sub-bass frequency reproduction demanded by audio professionals thanks to its custom 18-inch low-frequency transducer with 4-inch voice coil, providing 7 mm of driver travel before over-excursion to move more air for a low-end punch you can feel. When flown together in a vertical array, or combined for ground-stacked applications, the CDL18s and CDL12 form a complete, coherent loudspeaker system with an even response across the frequency spectrum.

The PreSonus® CDL12 is the result of years of research and development, combining the best attributes of point source and line array technology into a unique patent-pending design. The PreSonus® CDL12 is the result of years of research and development, combining the best attributes of point source and line array technology into a unique patent-pending design. Based on the Constant-Directivity Two-Way Loudspeaker System design presented at the 143rd AES Convention in New York by Hugh Sarvis and Don Keele, the CDL12 radiates a highly focused pattern with consistent SPL throughout the frequency response range, both on- and off-axis. The result is clear, articulate speech intelligibility and natural music reproduction.

The Martin Audio DX4.0 is an advanced loudspeaker controller and system matrix with four input and eight output channels. Class-leading sonic performance is achieved by state-of-the-art audio converters and DSP algorithms, with a 96kHz sampling frequency delivering a nominally flat response beyond 40kHz. The Martin Audio DX4.0 is an advanced loudspeaker controller and system matrix with four input and eight output channels. Class-leading sonic performance is achieved by state-of-the-art audio converters and DSP algorithms, with a 96kHz sampling frequency delivering a nominally flat response beyond 40kHz.

The NETBOX DSP is able to receive audio from the Dante network and then return it, mixed and processed, to be used in another device or subsystem. It can also generate test signals and vumeters. Effectively, it is an audio matrix for AoIP networks. The NETBOX DSP is able to receive audio from the Dante network and then return it, mixed and processed, to be used in another device or subsystem. It can also generate test signals and vumeters. Effectively, it is audio matrix for AoIP networks. NETBOX DSP can be used in combination with any AEQ or third-party device from more than 350 manufacturers which are compatible with Dante AoIP protocol. NETBOX DSP also incorporates 16 GPI and 16 GPO (each GPIO connector includes a power supply pin in order to feed external circuitry). GPIO can also be transported through the IP network between compatible devices. This way, a GPIO can drive the GPOs in different piece of equipment.

Meet DARC Surface, an intuitive, powerful Dante enabled Digital Console. It is a powerful mixing console that can control any source on your Dante AoIP network. Designed to be easy to setup, and use. Yet flexible and powerful for your needs today, and tomorrow. Meet DARC Surface, an intuitive, powerful Dante enabled Digital Console. It is a powerful mixing console that can control any source on your Dante AoIP network. Designed to be easy to setup, and use. Yet flexible and powerful for your needs today, and tomorrow. 8, 12 or 16 Channel Models. DARC Surface comes in 3 different models depending on the number of channels that you need. This means that you can choose what size best fit your needs. Whether the 8 with its small profile yet powerful design, or the 16, with all the faders you could ever need. DARC Virtual Console Software. The DARC Virtual Software comes included in the package deals. The DARC Surface works in harmony with the DARC Virtual Console software. Simple IP. The DARC Surface, along with the DARC Virtual Console, will work with any Dante enabled device on your network. This includes our Simple IP units, which can have either Analog or Digital Inputs & Outputs. Learn more.

Calrec's RP1 is a remote production console that gives broadcasters the ability to capture a wide range of live events, such as regional sports, news or music festivals, and mix them in a remote facility hundreds or thousands of miles away.

The SLMB6000 Audio Automation & Mixing Console is an all in one automation system with audio capture, editing, recording, live broadcasting, emergency radio broadcasting, audio processing, scheduling, and transmission functions. 

The SLDB5000 is an intuitive, modular audio mixing console designed for use in broadcasting. 

The SLBD100D/IP Audio Broadcast Delay is specially designed for safe broadcasting, while remaining cost-effective. 

The SLAS-3232/IP/MADI is an Audio Routing Mixer with Dante and MADI interfaces that supports up to 32 channels of stereo inputs/outputs.

The SLAS-1616/IP/MADI is an Audio Routing Mixer with Dante and MADI interfaces that supports up to 16 channels of stereo inputs/outputs.

The SLAS-0801D/IP Audio Switcher is specially designed for audio routing and switching in programming, broadcasting, master control and transmission. Widely used in radio stations, security centers, traffic systems, etc. It is the key piece of equipment for fully automatic broadcasting and control. SLAS-0801D/IP is equipped with an AOIP interface- connect AOIP networks for broadcasting or monitoring.

The SLAS-04BD/IP Audio Switcher is an intelligent routing switcher for backup signals. Detect and switch between signals intelligently; SLAS-04BD/IP assures the continuouation of smooth broadcasting.

The SLAR-2000 Analog/AES to AOIP Router is an audio router with AOIP interfaces. It supports 32 channels of stereo audio inputs, and is designed for multi channel audio monitoring.

The SLAR-1000 is an audio router with AOIP interfaces. It is designed as a router and audio converter, which converts different signal inputs/outputs. It is widely used in signal distribution and monitoring.

The SLAGC-1200D/IP Digital Audio Processor can promptly set IN audio signals within a preset range via DSP digital chipset. It is an effective solution to the unsteadiness of sound volume during broadcasting, or the unbalanced transmission of analog audio signals between different programs.

The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network.  The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. Audio can be independently distributed to 100’s of Dante supported audio devices. Supports HDR at up to 4K @ 30Hz (4:2:2). The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.

Deva 24 introduces a completely new recording and mixing system that delivers unsurpassed audio quality and control.  Deva 24 introduces a completely new recording and mixing system that delivers unsurpassed audio quality and control. Based on its award-winning predecessors, Deva 24 integrates 24 track recording with versatile input/output routing, ZaxNet, NeverClip, PowerRoll and MixAhead with a fast, intuitive touch screen interface. Deva 24 features 16 analog inputs, 12 are switchable mic or line level, each with adjustable limiter, high pass filter, input delay and 48V phantom power. NeverClip preamps provide 136 dB of dynamic range. Four additional line level inputs can be used as returns. 24 input channels of AES are available, 16 support AES42. With sample rate conversion, each input allows for a different sample-rate. Deva 24 accepts any unlocked AES signal with a sampling-rate of 32 to 192 kHz. The dynamic range of the sample-rate conversion is 124 dB. 10 output busses provide routing flexibility through four XLR, three TA-5M and three 3.5mm connectors. Outputs feature delay settings, level attenuation and assignable output names. 12 direct output channels of AES offers a processor independent feed to a backup recording system. There are additional connections for timecode, external slate mic and redundant power. USB slots connect Deva 24 to the Mix-16, Oasis and RX-12.

The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol.  The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol. 100/1000Mbps Ethernet supported. Transmission of four audio channels and one channel of InterCom. Configurable as a 4-channel transmitter (receiver) or a two-channel bidirectional link. Depending on a model (index “A”) supports 4 analog audio channels or (index “E”) 2 channels of AES3 audio. Auxiliary Ethernet port provides redundant network connectivity or cascading of devices. Capability of Ethernet SFP provides an optical connectivity (SFP module sold separately). Configuration and monitoring is made with a dedicated Dante Controller software package over Ethernet

The TD-102D is a wireless microphone system utilizing UHF and Dante network transmission.