Product Information
Sommer Cable’s SPY-EDA-4OX is a 4 Channel Dante adapter with 2x XLR 5-pole outputs
Similar Products
- BARE
BARE – DF-15
A network
active speaker is an active full-range speaker that integrates network
transmission, pure digital power amplifier and RS-232 control and monitoring.
It has high efficiency and high sound energy output, excellent sound quality,
perfect protection function and good electromagnetic compatibility
characteristics. It has a backup analog input interface and a Dante network
interface, which can transmit dual backups. It can be connected to the
built-in Dante board through a network cable to realize network audio signal
transmission. The IP address is automatically assigned through the router
DHCP, and the signal is transmitted with the audio matrix with dante function
in the local area network, and a set of all-digital network sound
reinforcement system can be easily formed. It is suitable for classrooms in
primary and middle schools, small and medium-sized meeting rooms, corridor
broadcasting and other places.
- I/O Interfaces
- Clockaudio
Clockaudio – CDT 100
The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet.
Features
- Easy to install with under table mounting
- Audio and control signals transported over Dante
- 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
- Provides Phantom Power for each mic input
- 4 control inputs compatible with all Clockaudio devices including:
- direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
- direct connection to ARM-C controller
- Open API for interfacing with Control Systems
- Compatible with any Dante capable audio DSP
- I/O Interfaces
- RDL
RDL – RU-BNFP
The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE.
The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products.
RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.
The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints.
The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
- I/O Interfaces