The M2T half-rack transmitter houses two stereo transmitters to provide two stereo audio channels, and for up to four mono audio channels in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full-size XLR/TRS combo types for balanced line-level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise.
A Dante™ Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can daisy chain the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.
GlenController automatically finds all compatible devices that it can control on your network and shows them in a list on the left hand side of the screen. Just select the device(s) that you would like to control and a detailed device screen will be provided. It is possible to password protect devices to prevent unauthorised access and adjusting of a device's parameters.
All compatible devices can connect to multiple GlenControllers simultaneously, meaning that several operators in your workflow can access a device and see its levels, gains etc at the same time.
GlenController has built in redundancy. It connects to the devices that it is controlling by both the primary and secondary network interfaces (if available) and, like Dante network audio, it provides seemless backup if one of the two networks should fail.
Many of the device types support remote firmware upgrade from GlenController without the need to use USB. This is very handy if there are many devices on the network, as all of them can be updated simultaneously.
None of the devices that GlenController connects to requires GlenController to be running for them to operate. This means that if the PC that is running GlenController has an issue mid-broadcast then your broadcast audio will not be affected.
GlenController is a secure "sandboxed" UWP-type app, meaning it has restricted access to the host computer. It is digitally signed with a publicly trusted certificate obtained from Sectigo (former Comodo) authority.
FF2470 performs 24-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF2470 is equipped with 24 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.
FF2470 uses 24 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.
FF2470 mounts high-reliable, switching power supply (1290 W peak) with universal input (90 – 264 VAC).
FF2470 has analog line input and built-in Dante input both.
FF2470 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes: • Beam tilting/broadening control; • Anti-Reverberation System ARS. • Delay control; • 8-biquads user equalizer with high/low shelving and parametric filters;
FF2470 cabinet is aluminum extrusion and it is designed and manufactured in Germany.
FF0870 performs 8-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF0870 is equipped with 8 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.
FF0870 uses 8 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.
FF0870 mounts high-reliable, switching power supply (430 W peak) with universal input (90 – 264 VAC).
FF0870 has analog line input and built-in Dante input both.
FF0870 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes: • Beam tilting/broadening control; • Anti-Reverberation System ARS. • Delay control; • 8-biquads user equalizer with high/low shelving and parametric filters;
FF0870 cabinet is aluminum extrusion and it is designed and manufactured in Germany.
FF1670 performs 16-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF1670 is equipped with 16 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.
FF1670 uses 16 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.
FF1670 mounts high-reliable, switching power supply (860 W peak) with universal input (90 – 264 VAC).
FF1670 has analog line input and built-in Dante input both.
FF1670 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes: • Beam tilting/broadening control; • Anti-Reverberation System ARS. • Delay control; • 8-biquads user equalizer with high/low shelving and parametric filters;
FF1670 cabinet is aluminum extrusion and it is designed and manufactured in Germany.
Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.
The AD4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante™ output, and signal routing options bring a new level of management and flexibility to your entire workflow.
Designed for flypack and OB audio applications, the S500m console delivers maximum control in a light weight and reduced form factor, whilst offering the same flagship performance and surface configurability as the S500.
The new ELAN® Digital IP-Enabled Multi-Room Audio System featuring Dante® audio networking is the next generation of Multi-Zone Audio. This new intelligent audio system delivers exceptional quality with the flexibility to scale from a single chassis to multiple chassis and up to 64 zones. The comprehensive line includes a Multi-Zone Audio Matrix, Multi-Zone Audio Extender, Multi-Zone Pre-Amp Audio Matrix, Local Audio Source Preamp and a Network Audio Card.
The new ELAN® Digital IP-Enabled Multi-Room Audio System featuring Dante® audio networking is the next generation of Multi-Zone Audio. This new intelligent audio system delivers exceptional quality with the flexibility to scale from a single chassis to multiple chassis and up to 64 zones. The comprehensive line includes a Multi-Zone Audio Matrix, Multi-Zone Audio Extender, Multi-Zone Pre-Amp Audio Matrix, Local Audio Source Preamp and a Network Audio Card.
The new ELAN® Digital IP-Enabled Multi-Room Audio System featuring Dante® audio networking is the next generation of Multi-Zone Audio. This new intelligent audio system delivers exceptional quality with the flexibility to scale from a single chassis to multiple chassis and up to 64 zones. The comprehensive line includes a Multi-Zone Audio Matrix, Multi-Zone Audio Extender, Multi-Zone Pre-Amp Audio Matrix, Local Audio Source Preamp and a Network Audio Card.
PacketAV® Duet has been nothing short of a paradigm shift for networked AV. True convergence; a single platform to support Dante™/AES67 and Video over IP. Building on their success and wide adoption, the next generation of PacketAV® Duet endpoints continue to provide powerful 4K UHD Video and Dante™/AES67 Audio – now over a single Gigabit Ethernet port, with USB-C connectivity and other enhanced features.
Visionary’s PoE 4K UHD over IP cinema quality, ultra-low latency [~1 frame - visually lossless], encoders and decoders bypass the constraints of traditional switch matrix distribution systems by continuing to harness the flexibility and scalability of converged IP networks.
With the growing demand for 4K UHD video, professional AV designers and IT directors – in an increasingly converged AV/IT environment – have been using Visionary’s products as an alternative to conventional distribution systems.
PacketAV® Duet has been nothing short of a paradigm shift for networked AV. True convergence; a single platform to support Dante™/AES67 and Video over IP. Building on their success and wide adoption, the next generation of PacketAV® Duet endpoints continue to provide powerful 4K UHD Video and Dante™/AES67 Audio – now over a single Gigabit Ethernet port, with USB-C connectivity and other enhanced features.
Visionary’s PoE 4K UHD over IP cinema quality, ultra-low latency [~1 frame - visually lossless], encoders and decoders bypass the constraints of traditional switch matrix distribution systems by continuing to harness the flexibility and scalability of converged IP networks.
With the growing demand for 4K UHD video, professional AV designers and IT directors – in an increasingly converged AV/IT environment – have been using Visionary’s products as an alternative to conventional distribution systems.
The MX Series have been designed to offer a uniquely simple solution to the long-standing problem of routing of multiple mixing consoles outputs to a speaker system / system processor. Handling up to 36 inputs in 2U across analogue, AES and Dante networks, these are arranged in sets of four (to typically support Left-Right-Front Fill and Sub feeds from an individual console). All AES inputs have SRC. There is one set of four outputs, available simultaneously across analogue, AES and Dante networks with Word Clock output sync available on AES.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
