Cart
← Back to Product Catalog

Focusrite – D16R MkII

I/O Interfaces

More details

Similar Products

rdl-dd-bn22_1200px_0|rdl-dd-bn22_1200px_0
  • RDL

RDL – DD-BN22

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product
arista-ars-0202-a11
  • Arista

Arista – ARS-0202-A11

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

  • E-Vocal ARS-0202-A00
  • E-Vocal ARS-0202-B00
  • E-Vocal ARS-0202-A11
  • E-Vocal ARS-0202-B11

E-Vocal ARS-0202-A11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an RJ45 copper network interface and can be powered by PoE or 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

    I/O Interfaces
See the product
extron-axi02at
  • Extron Electronics

Extron – AXI 02 AT

The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. This Dante Audio Interface provides two channels of audio output from the network to devices without Dante connectivity. It features two line level analog outputs on captive screw connectors with a mirrored two-channel S/PDIF output on a coaxial RCA connector. The AXI 02 AT interfaces with a Dante audio network over a standard local area network, and is powered through PoE. The AXI 02 AT includes a ZipClip® 100 Mounting Kit and is compatible with Extron Rack Shelves and ZipClip 200 mounting solutions.
    I/O Interfaces
  • Dante Ch: 2 In
  • 24-bit
See the product