Dante-enabled Product Catalog

Oxygen 3000 Digital Mixing Console for Radio defined a new standard in the broadcast market. Characterized by an elegant design and compact size, Oxygen 3000 is suitable to be used as On Air Console and Production Console. Oxygen 3000 is based on digital technology with DSP audio processing to deliver high-end quality, latest features and flexibility with ease of use. Oxygen 3000 is the Bestseller in its category at the best quality/price ratio. Oxygen 3000 is a powerful and compact unit featuring 10 faders, meters for each single channel, built-in 7” display for settings, wide range of connectivity and accessories in a rugged and classy steel chassis.

Easy and reliable as the analogue mixing consoles, Oxygen 3000 adds the value of the digital engine that grants a near 0 latency ( < 0,7 ms I/O ) and plenty of advanced functions as the internal routing signal, customizable preset and easy recall, user defined smart keys, analog and digital I/O.

Oxygen 3000 completely revised with a brand new firmware.

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 412 T is a professional, four-channel installation power amplifier with 4 x 120 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The versatile DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches The IPA 412 T is already equipped for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configuration and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 412 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 424 T variant with 4 x 240 watts is available for larger installations.

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 424 T is a professional, four-channel installation power amplifier with 4 x 240 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches. The IPA 424 T is already prepared for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configurability and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 424 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 412 T variant with 4 x 120 watts is available for smaller installations.

●Frequency response: 20Hz～20kHz

●Directivity: Super-cardioid pointing

●Dynamic range: 85dB

●Signal-to-noise ratio: 72dB

●Power: PoE: IEE802.3af: Standard

●Output connection port: RJ45 (Cat5 or Cat6 network cable connection)

●Weight: 1.22 kg

●Microphone length: 300mm

●Base specification (mm): 114x160X57

The 4-channel DSP digital power amplifier is composed of a 3.97-inch color TFT resistive touch screen module and an audio processing module. There are 4 analog audio balanced signal input terminals, which are converted into 4 balanced outputs, and a series of software digital processing is carried out in the middle. .

● 32 bit DSP, 48kHz sampling rate, 24bit AD/DA convert.

● Each analog input channel with +48V phantom power, MIC/LINE input gain switchable, MIC input sensitivity adjustable.

● Input including, low-cut, independent feedback inhibition, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.

● Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link. Adjustment and volume adjust.

● All PEQ Gain, bandwidth, frequency continues adjustment. type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.

● All inputs/outputs can do Matrix, and all the input and output channel name can be changed.

● All the input and output with independent phase curve adjust function, PEQ style choose ALLPASS1 is 180°curve adjust, ALLPASS2 is 360° curve adjust.

● All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.

● Noise gate's threshold, time, ratio can be adjustment for inputs, compessor, limiter, ratio, time can be adjustment for outputs.

● Maximal delay time 680mS for all input/output channels.

● Pre settings can copy for every single channel, every channel can do link adjust.

● Every input and output channel PEQ curve adjusting picture can be found when you are in any input and output.

● Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).

● Front panel has level indicator for input/output ,USB port, power supply, net port indicator light. Plug-in USB port and net port. PC one-button connection easy for user’s operations.

● 21 user presets, device and each preset can be save and recall. Password protection function for high level applications.

● Unique assembly aluminum side plate card slot design, can assemble two identical machines into one standard 1U machine. Also can assemble its side ear to the standard cabinet.

The AMK DT64-B-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

One PoE amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with (2) speakers per audio zone.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications. The DT64-B-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.

Network audio interface with Dante (AES67 compliant)

16 x analogue inputs (mic/line)

16 x analogue outputs

8 x AES3 inputs (up to 192kHz)

8 x AES3 outputs

16 network remote controllable mic amps

Windows 10 App for remote control

Redundant network links (both copper & fibre)

Redundant power supplies

19 Inch 1RU

Video: HDMI v2.0 and HDCP 2.0

Supported resolution: 4096 x 2160 /60P (4:4:4)；

Supports wiring of up to 8 HDMI embedded LPCM digital audio channels, as well as 24bit,192kHz sampling frequency for each sample.

Supports transmission of embedded HBR audio formats: such as Dolby digital true HD and DTS-HD Master Audio.

IP network-based audio, supports transmission of network-based audio via switches

2 * USB ports, supports KVM function

IR Control: Supports bidirectional IR transmission

RS-232 Control: supports bidirectional RS-232 transmission, up to 115,200 baud

HDMI input 1 * 19-pin female HDMI interface

Analog stereo audio: 1 * 3.5mm stereo-mini jack

10GbE and 1GbE ports: 2 * shielding RJ45 interface and LED indicator light

1 * IR input: 3.5mm stereo mini jack

Maximum pixel clock frequency: supports pixel clock frequency up to 594MHz

Switching Plane: independent switching planes supported I/O switch arrays of all connected videos, audios, RS-232 and IR signals

● Comply with Dante Network System

● Built-in 2x25W/2x50W digital amplifier

● Can play music, paging and alarm from the console

● One AUX input, one AUX output, 100V input

● 1 AUX output of RCA for power extension

● LED screen indicator for display status

● Comply with Dante Network System

● Built-in 2x25W/2x50W digital amplifier

● Can play music, paging and alarm from the console

● One AUX input, one AUX output, 100V input

● 1 AUX output of RCA for power extension

● LED screen indicator for display status

● Comply with Dante Network System

● 2 channel amplifiers within one 1U & 19" case

● Two audio inputs, can be added to the existing Dante system

● Two priority inputs and two 100V inputs as audio sources

● 70V/100V speaker output for long distance transfer

● Industrial design for audio project, long term & stable use

● High efficiency (85%) and with standby function

TheAtlasIED1544AIO-D is a 4-input (2 flow) x 4-output (2 flow) mic / line level analog pre-amplifier that converts analog audio signals to Dante® network

audio. Multiple channels of Dante® network audio can be transported over standard IP networks. TheAtlasIED1544AIO-D 4x4 Dante® I/O Module features four analog balanced mic or line inputs (selectable) and four balanced line outputs. The four analog inputs are converted into Dante® network audio and can be routed via Dante Controller™. The four outputs convert Dante® digital audio received over the LAN into analog audio. There are indicators for network connection, network audio traffic, and power. Each input can be selected to Line or Mic level. In Mic mode, each input has 3 gain selections with Phantom Power. TheAtlasIED1544AIO-D requires no external power supply. It is powered via a network PoE port or a PoE injector.

The 1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante® network audio input, equalization, level control, andAtlasIED’s patented AlwaysHEAR™smart ambient analysis automatic level adjustment. AlwaysHEAR™. ensures the audio levels are automatically adjusted to always be set at the perfect sound level. The 1544ZOP provides four line-level balanced analog audio outputs for driving external amplifiers or powered line arrays. The 1544ZOP integrates with AtlasIED’s GLOBALCOM®.IP announcement controller, or may be used in stand-alone applications. Optionally, the processed zone output audio may be routed back out over the network as Dante digital audio.

In addition to the four zone outputs, the 1544ZOP has four balanced line-level analog inputs that may be used as automated test inputs associated with the four zone outputs. Alternately, the analog inputs may be routed out over the network as Dante digital audio for such uses as for background music or auxiliary audio sources.

The 1544ZOP also provides eight (8) logic inputs. Four of the inputs are standard closure detection and four are supervision capable, which provides the additional means to detect open or short conditions on the incoming links.

Inputs are provided for connecting up to eight (8) 540S ambient noise sensors (2 sensors for each output channel). This allows the output of each channel to be automatically adjusted in real time based on the measured ambient noise level in the zone.

The 1544ZOP may be configured from the GLOBALCOM.IP System Management Center (SMC) or via the open-standard SNMP (Simple Network Management Protocol).

The TASCAM BO-32DE is a rugged, rackmounted audio adaptor designed for professional installation. 32 front-panel Eruoblock connectors are internally bridged to four D-Sub output connectors on the rear panel, providing fast and easy I/O and interconnectivity between CD players, Digital Audio players, Mic Preams, Zone Mixers, Distribution Amplifiers Audio over IP Convertors and more.

The AMK DT81-A loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

The AMK DT82- A loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

The two network speakers broadcast same program under single channel.

The CX802 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications. The DT82-A is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

Millennia’s G­­ōzowta converts from Dante audio over Ethernet to high resolution analog at sample rates up to 96 kHz.

The DA-296 connects any two channels of Dante to your analog gear. Power amps, stage monitor systems, powered speakers and more.

The G­­ōzowta also has 1/4 and 1/8 inch headphone jacks with a level control so it can be used as part of a personal monitor system or for trouble shooting Dante audio streams.

Outputs include balanced XLR and Phoenix-style output connectors. Power is supplied by the Ethernet cable from PoE (power over Ethernet) enabled switches or in-line PoE injectors.

There is a -10dBV/+4dBu output reference level switch to accommodate most analog equipment

Housed in a rugged 1/3 rack width chassis, the G­­ōzowta is the same size as Millennia’s portable preamp series. It can also be bolted to a Mid Atlantic rack tray.

Equally at home in houses of worship, schools, broadcast facilities, live venues, touring rigs, and recording studios, the PreSonus® StudioLive® RML16AI rack-mount Active Integration™ digital mixer is a versatile and flexible solution for live sound and recording. These versatile 25-bus mixers offer 8 mic inputs, 8 combo mic/line inputs, and 16 digital inputs via FireWire, AVB, or Dante, for a total of 32 input channels, expandable up to 64. StudioLive RML16AI mixers are flawlessly integrated with state-of-the-art software and boast an integrated multitrack recording interface, advanced AVB or Dante networking, and multiple control options. Yet they’re easy to use, with a workflow that will let you focus on mixing, without being distracted by the technology.

Equally at home in houses of worship, schools, broadcast facilities, live venues, touring rigs, and recording studios, the PreSonus® StudioLive® RML32AI 32-channel, 25-bus, rack-mount Active Integration™ digital mixer is a versatile and flexible solution for live sound and recording. StudioLive RML32AI mixers offer 24 mic inputs and 8 combo mic/line inputs and are expandable up to 64 channels. Flawlessly integrated with state-of-the-art software, they boast an integrated multitrack recording interface, advanced AVB or Dante networking, and multiple control options. Yet they’re easy to use, with a workflow that will let you focus on mixing, without being distracted by the technology.

The new generation of BRÄHLER‘s DIGIMIC 32 conference system will incorporate a Dante enabled audio interface for both DIGIMIC system interconnection and interoperability with 3rd party digital audio systems.

Easy and cost-effective audio interfacing

Provides a choice of up to 32 high- quality audio channels used for distribution of interpretation and floor channels.

Complete, high performance digital DIGIMIC media networking toolkit

True plug and play, with label-based routing

Widespread adoption, highest DCen and 3rd party device interoperability

Supports existing Ethernet switches or AVB switch

High Performance

Sample accurate timing

High quality, low jitter audio clocks

Ultra-low latency

The Quicklink TX Quad will allow you to easily manage 4 simultaneous incoming Skype/Microsoft Teams calls to be processed as 4 SDI or NDI™ outputs in one single unit. A high availability option is available on this unit for full redundancy and resilience.

Product Highlights

Manage 4 incoming Skype/Teams calls to 4 SDI outputs

4 professional SD/HD SDI input & outputs

Supports both I/O for NDI™

High Availability Option including Dual Power Supply & Raided drives

Skype TX controller software with control console

Ultra low delay: For instantaneous 2 way video/audio contributions

Video and audio free from adverts

Aspect ratio correction method: Scale your SDI input picture to your requested resolution

Customisable tally or information graphic overlay back to return caller

Talkback: Switch between 3 different audio sources

Screen sharing capability

Auto-Answer function

Embedded SDI audio (16 Channel in hardware)

AES balanced audio (additonal hardware required)

Remote Management Ethernet Port for bare metal restore

HD Recording Function

Free complimentary technical information via the Customer Portal

The ADX-2400M MADI Network Interface accepts a MADI stream as its local inputs, and outputs a MADI stream as its local outputs, making integration with the truck's or studio's audio system fast and simple.

The 24 local inputs and outputs use 24 of the 64 available MADI channels, and may be configured to use channels 1-24 or 33-56. All other MADI channels pass through the unit. This allows two ADX-2400Ms to be used in tandem on a single MADI stream.

Both optical and coax MADI inputs and outputs are available. The optical I/O uses a standard SFP module, so it may be configured for multi-mode or single-mode fiber, with wavelength and power parameters of the customer's choice.

These units may serve as the 'truck end' of ADX networked announce systems, or with other 2400s for transmission or distribution, or to provide a network interface for other vendors' networked products.

The ADX-2400N Analog Network Interface unit is the analog version of the ADX-2400 with balanced, +4dBm analog local inputs and outputs. The ADX-2400N provides very high quality transmission of 24 analog inputs to network transmit channels, and 24 network receive channels to analog outputs.

The A-D and D-A conversion is done by premium quality 24-bit converters, resulting in very transparent, clean audio.

These units may serve as the 'truck end' of ADX networked announce systems, or with other 2400s for transmission or distribution, or to provide the network interface for other vendor's networked products.

AX32 already support 64 channels of Dante IP Audio via an optional module, but in an effort to meet demand for an even higher channel count, our an optional expansion card adds another 128 channels to your digital audio-routing matrix.

Further, with eight slots available for expansion cards, you could ultimately have up to 1,088 Dante/AES67 channels, including the 64 channels that comes as standard, at 48 kHz.

The Dante expansion card also offers sample rate conversion on all channels as well as dual redundancy network ports in order to maximize reliability, reducing the risk of losing valuable production time.

Independent Sample Rate Conversion

The Dante expansion card features per-card sample rate conversion, which by using more cards allows several independent audio networks that run on individual clocks and sample rates to be connected to and unified in a single AX32 unit.

This naturally unleashes a wealth of possibilities for distributing audio across sources and destinations on highly complex setups that e.g. involve sending a feed to an OB truck, while recording at a different sample rate and sending yet another feed to a FOH console or an in-ear monitoring system.

Simply adding more Dante channels may sound trivial, but once you start to think about the actual problems that this amount of channels in combination with independent sample rate conversion is capable of solving, it’s a quite significant improvement of the overall system.

For instance, the new Dante card will immediately be able to solve real-world challenges in regard to high channel counts when working with Dolby Atmos Mastering Suite, as well as in recording studios where Dante based monitoring systems are used, but there is a need to record at a different sample rate or in Live applications where there Dante networks have to be kept physically separated when operating on different clocks.

The internal sample rate converters on the new Dante cards have been developed in-house and we have never compromised on the quality of our AD/DA converters – or internal sample rate conversion within the digital domain. ‘Digital’ is simply part of our brand name and we take that very seriously!

Applications

- Live & Events

- Film Production (Dolby Atmos Mastering Suite)

- Broadcast

- Music Production

Highlights

- 128 channels @ 48 kHz / 64 channels @ 96 kHz / 32 channels @ 192 kHz

- Independent Sample Rate Conversion

- Dual Redundancy Ethernet Ports

- AES67 Support

- Up to 8 cards in a Single AX32 Mainframe

Details

The Dante card can operate either as a single 128x128 channel interface with a switch for the two Ethernet connectors or redundantly, where the two Ethernet connecters are connected to different networks each carrying 128x128 channels. If more cards are installed, each card can be connected to a different network or more cards can be connected to the same network via an external Ethernet switch or by bridging the network between the cards when operating in non-redundant mode.

The Dante card can operate in Dante mode or AES67 mode with support for discovery via SAP. In Dante mode, Dante Domain Manager (DDM) is supported for enhanced network management functionality. Configuration of the card is managed via DADman.

The MXCWAPT Access Point Transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. The MXCWAPT automatically selects the clearest channel in the 2.4 GHz and 5 GHz frequency bands and switches channels to avoid potential interference. The access point provides both Dante™ and analog audio inputs and outputs, and uses a single Ethernet connection for power, audio, and control.