Cart
← Back to Product Catalog

Kevic – LW-1151PN

Speakers

More details

Similar Products

2017225112834
  • BARE

BARE – BR-10D6

● Model: BR-10D6
● Specification: 6 inch 2 frequency division
● Driver: low frequency 6 inch, high frequency 1 inch
● Power: 80 watts
● Frequency response: 60-18KHz
● Sensitivity (W / M): 94dB
● Scattering angle: 80x60
● Crossover frequency 2.5KHz
● Audio transmission: Dante digital audio transmission card
● Active power amplifier module: Class D power amplifier 200 watts 8 ohms
● Dimension (W * D * H): 205x205x350mm

    Speakers
See the product
FZ-102-HPA-frontal
  • FZ

FZ Audio – FZ 102HPA

Características

  • Caixa acústica duas vias 1 x AF de 12” + driver 2”
  • Duas versões de guia de onda: 60º x 60º ou 90º x 60º
  • DSP Interno (Digital Signal Processor) com controle via PC ou MAC através de protocolo TCP-IP
  • Falante de baixa compressão de potencia com bobina de 3”
  • Amplificação Digital e fonte chaveada
  • Flytrack superior e lateral para içamento
  • Quatro pontos M6 para suporte pan/Tilt e flange 35mm para pedestal
  • Corneta rotacionável para montagem na vertical / horizontal
  • Formato PA / monitor simétrico – caixa L e R
  • Presets e Filtro High Pass selecionável através de software com comando no painel traseiro
  • Entradas de áudio digital protocolo Dante opcional
    Speakers
See the product
K-array_-_KMT12_Mark_I_800pxl|K-array_-_KMT12_Mark_I_800pxl
  • K-array

K-array – KMT12 Mark I

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  
    Speakers
  • Dante Ch: 2x2
  • 48kHz-96kHz
See the product