Cart
← Back to Product Catalog

BARE – BR-10P6

Speakers

More details

Similar Products

Fohhn_FS-200
  • Fohhn

FS-200

FS-200 is an extra slim, active line source speaker with Fohhn Beam Steering Technology. This allows the control of the sound beam by turning the mouse wheel. The Focus Slim series makes this world-renowned Fohhn technology attractive for smaller and more price-sensitive projects. Thanks to the crystal-clear speech transmission, the systems are ideal for high class conference rooms, lecture halls and small to medium sized churches. Main features
  • 16 × 2.5" broadband chassis with coaxial Fohhn diffraction waveguides
  • 16 integrated Fohhn DSP amplifiers with 75 W each
  • 123 dB max. SPL
  • Integrated bass reflex system
  • Very wide horizontal dispersion of 140°
  • Vertical dispersion controllable in real time via Fohhn Audio Soft
  • Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
  • Acoustic centre displaceable over entire line length
  • Fohhn Two Beam Technology (two independent dispersion beams)
  • Fohhn Side Lobe Free Technology (suppression of side lobes)
  • With analog inputs + Dante
  • Q-Sys and Crestron plug-ins available
  • Flexible mounting thanks to T-slot on the rear
  • Only 8.5 cm wide
    Speakers
  • AES67 Enabled
See the product
K-array_-_KMT18_Mark_I
  • K-array

K-array – KMT18 Mark I

The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations. The K-array KMT18 I is a powered 18” subwoofers, with a programmable on-board DSP and multiple analog and digital inputs and outputs for creating a wide array of speaker configurations. The amplifier mounted on board is class D, delivering 2 x 1000 W at 8 Ω. The KMT18 I features an integrated touch screen, providing intuitive control over the main DSP functions: input/output levels, signal routing, offset delays for subwoofer and speakon output (up to 12 ms) and overall system delay (up to 330 ms). All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The KMT series provides two balanced analog line level inputs and a two-channel AES/EBU digital input. An integrated class D amplifier delivers 2 x 1000 W at 8 Ω, with a max THD of 1% (EIAJ test @ 1kHz). The KMT18 I features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including mid-high models (KK52, KK102) or additional passive subwoofers (KMT18P). To optimize performance, the on-board DSP includes up to 40 programmable presets. The unique four-corner port configuration provides symmetrical back loading to the speakers, for extended bass response with very low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread mount position for attaching mid-high speakers makes the subwoofer convenient to use and ideal for medium throw applications in theaters, concert halls, and Audio/Video installation
    Speakers
See the product
CA401D
  • DMIX

DMIX – CA-401D

Technical parameters：

Speaker model: CA-401D

Unit configuration: 1×4"(100mm) Full frequency unit

Frequency range: 120Hz-20kHz

Rated power: 30W

Sound pressure level: 110dB

Sensitivity: 90dB

Coverage Angle: 100°×90°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 145×253×180 (W×H×D)

    Speakers
See the product