Cart
← Back to Product Catalog

Kevic – CK-1122PN

Speakers

More details

Similar Products

kevic-ks1151SPN
  • Kevic

Kevic – KS-1151SPN

The Kevic KS-1151SPN is a single 15" active network subwoofer speaker with Dante. The Kevic KS-1151SPN is a single 15" active network subwoofer speaker with Dante. Features:
  • 15" network subwoofer speaker
  • Lossless & Noiseless System by Dante Ethernet Transmission
  • Optimization preset value apply by DSP
  • Maximization of damping factor by D-Class power amplifier
  • Ultralight voice coil and top class material are applied
  • Simple system with DSP and power amplifier
  • Can use as wedge monitor speaker
    Speakers
See the product
K-array_-_KMT12_Mark_I_800pxl|K-array_-_KMT12_Mark_I_800pxl
  • K-array

K-array – KMT12 Mark I

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  
    Speakers
See the product
FF2470
  • AVE

AVE – Ascolto FF2470

FF2470 performs 24-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.

FF2470 is equipped with 24 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.

FF2470 uses 24 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.

FF2470 mounts high-reliable, switching power supply (1290 W peak) with universal input (90 – 264 VAC).

FF2470 has analog line input and built-in Dante input both.

FF2470 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.

AVE Line Array User Control includes:
• Beam tilting/broadening control;
• Anti-Reverberation System ARS.
• Delay control;
• 8-biquads user equalizer with high/low shelving and parametric filters;

FF2470 cabinet is aluminum extrusion and it is designed and manufactured in Germany.

    Speakers
See the product