Product Information
·32 x 32 Channels DANTE DIGITAL SNAKE BOX
·32 XLR balance Inputs, 32 XLR balance Outputs
·Dante BK2 32In / 32Out support
·BK2 Dante + DSP (DMB-32)
Similar Products
- Rane
Rane – HAL EXP1x
The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate.
The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate. DR remotes are also supported on any RAD port, so the EXP1x also adds additional DR remotes. The graphic below shows most of the range of RADs and DRs that connect with shielded CAT 5e cable (or better). 512 inputs and 512 outputs are possible if 32 EXP1x Expanders are cascaded to a HAL1x.
- DSPs (Digital Signal Processors)
- Magnetic
Magnetic – MA-808Dante
| Mode | MA-808Dante |
| Input Channels | 8 |
| Output Channels | 8 |
| Scenem anagement | 8 sets of pre -set scenes |
| Input channel features | Pre-amplification, signal generator, expander,compressor, automatic gain control, 5-section PE Q |
| Output channel features | 8-section PEQ, delayer, frequency divider, high - lowpass filter,lim iter |
| Sampling rate | 48kHz |
| Dynamic range from input tooutput | >110dB |
| Phantom power | DC 48V |
| Input common-mode reject ion | 75dBu @ +20dBu,60Hz |
| Channel isolation | 105dB |
| Frequency response | 20~20kHz (±0.5dB ) |
| Total harmonic distortion (THD+N ) | ≤0.005% @1kHz,+4dBu |
| Max. input gain | 54dB |
| Input impedance | 2KΩbalance |
| Output impedance | 100 ohm |
| Max. output level | 20dBu |
| Power supply | AC 110V~230V AC, 50Hz /60 Hz |
| Working temperature | 0-40℃ |
- DSPs (Digital Signal Processors)
- ITC
ITC – TS-P8888D
8 Input and 8 Output Digital Audio Processor, with Dante network transport protocols
- DSPs (Digital Signal Processors)