Dante-enabled Product Catalog

Klotz

Klotz – GRAPHITE TWO

GRAPHITE TWO consoles are extremely versatile as they can be configured either as stand-alone or as networking consoles. GRAPHITE TWO consoles are extremely versatile as they can be configured either as stand-alone or as networking consoles. The fully modular design allows configuring mixing consoles from 8 to 32 faders - up to 640 input and 640 output channels. Many features can be programmed individually by the customer such as monitor feeds, GPIs and GPOs, sources and busses and logic commands. The control surfaces are connected by either IPX/SPX or TPC/IP protocol to the G2 audio engines and routers and can share all sources and outputs within the audio network. Using the IPX/SPX protocol interface, GRAPHITE TWO consoles are an ideal option to upgrade existing VADIS* system installations as they are fiully VADIS* compatible. A unique feature is the option to install a break-in / break-out unit within the console frame. The interface unit is fitted with 8 audio input channels which can be configured either as stereo or mono inputs and outputs. The interface unit uses a Dante protocol-based Ethernet connection to the main frame which can be located in the main control room (MCR). GRAPHITE consoles offer a range of features that can be configured via the GRAPHITE configuration tool. Users can define presets for audio settings, function keys for GPIO and other control features, external sources for control room and studio monitoring, and snapshot keys to store the entire console set-ups.

Personal Mixing & Monitoring

See the product

Klotz

Klotz – G2 Audio Engine

The G2 audio engine hosts a DSP farm powerful enough for 32 equalizers, 32 dynamics, up to 256 mixing channels and a 64 x 64 mix minus matrix. The G2 audio engine hosts a DSP farm powerful enough for 32 equalizers, 32 dynamics, up to 256 mixing channels and a 64 x 64 mix minus matrix. 21 plug-in positions can be equipped with analogue and digital interface cards, fiber optic transceivers and MADI cards. Audio-over-IP interface cards for DANTE-protocol (trademark registered for Audinate Pty Ltd) and Ethernet AVB will be available shortly.

I/O Interfaces

See the product

Taiden

Taiden – HCS-8300MOD/FSD

In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. The new generation paperless multimedia terminals are equipped with 10" with 1280X800 high resolution LCD touch screen, and the new experience of capacitive touch screen which supporting multi-touch, make paperless experience and operation more convenient and efficient, and can achieve a variety of HD video service, and a built-in 5 megapixel camera, and video intercom function, and E-ink nameplate with the latest electronic ink technology, at the same time, it can also realize interactive conference control and management (discussion, vote, 2 x 64 channel simultaneous interpretation), conference services, etc.

Conference Systems

See the product

Taiden

Taiden – HCS-8300MOA/FSD

In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. The new generation paperless multimedia terminals are equipped with 10" with 1280X800 high resolution LCD touch screen, and the new experience of capacitive touch screen which supporting multi-touch, make paperless experience and operation more convenient and efficient, and can achieve a variety of HD video service, and a built-in 5 megapixel camera, and video intercom function, and E-ink nameplate with the latest electronic ink technology, at the same time, it can also realize interactive conference control and management (discussion, vote, 2 x 64 channel simultaneous interpretation), conference services, etc.

Conference Systems

See the product

Taiden

Taiden – HCS-8300MID/FSD

In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. The new generation paperless multimedia terminals are equipped with 10" with 1280X800 high resolution LCD touch screen, and the new experience of capacitive touch screen which supporting multi-touch, make paperless experience and operation more convenient and efficient, and can achieve a variety of HD video service, and a built-in 5 megapixel camera, and video intercom function, and E-ink nameplate with the latest electronic ink technology, at the same time, it can also realize interactive conference control and management (discussion, vote, 2 x 64 channel simultaneous interpretation), conference services, etc.

Conference Systems

See the product

Taiden

Taiden – HCS-8300MIA/FSD

In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. In 2014, TAIDEN continued to lead the development of conference system technology, and introduced a new generation of paperless multimedia conference system. The new generation paperless multimedia terminals are equipped with 10" with 1280X800 high resolution LCD touch screen, and the new experience of capacitive touch screen which supporting multi-touch, make paperless experience and operation more convenient and efficient, and can achieve a variety of HD video service, and a built-in 5 megapixel camera, and video intercom function, and E-ink nameplate with the latest electronic ink technology, at the same time, it can also realize interactive conference control and management (discussion, vote, 2 x 64 channel simultaneous interpretation), conference services, etc.

Conference Systems

See the product

Symetrix

Symetrix – xIn 4

The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIn 4 may be surface mounted. Features

Audio input (A/D) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
costs down.
4 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Edge and Radius.
Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
Rack mount and surface mount kits sold separately.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

symetrix-xIO-4x4_1200px|symetrix-xIO-4x4_1200px

Symetrix

Symetrix – xIO 4×4

The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power) and four analog outputs’ parameters (mute), along with bus assignments, are configured using Symetrix Composer open architecture software. xIO 4x4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIO 4x4 may be surface mounted. Features

Audio input (A/D), output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring
overall system costs down.
4 mic/line inputs, including +48 VDC phantom power, and 4 line outputs with the industry leading performance specifications of Edge and Radius.
Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
Rack mount and surface mount kits sold separately.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

Symetrix

Symetrix – xOut 4

The cost effective xOut 4 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. The cost effective xOut 4 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog outputs’ parameters (mute), along with bus assignments, are configured using Symetrix Composer open architecture software. xOut 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xOut 4 may be surface mounted. Features

Audio output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
costs down.
4 line outputs with the industry leading performance specifications of Edge and Radius.
Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
Rack mount and surface mount kits sold separately.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

Yamaha

Yamaha – RSio64-D

The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs. The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs. It provides versatile routing capability as well. Four Mini-YGDAI card slots allow cards for a wide variety of input/output formats as well as processing functions to be connected to a Dante network for live sound, broadcast, recording, post production, and other applications. The RSio64-D also supports remote setup from CL and QL series consoles. Features

Accepts a wide range of Mini-YGDAI input/output and processing cards
Seven general routing presets, including routing between Mini-YGDAI cards
Supports matrix patching from R Remote V3 or a CL/QL series console
Sample rate converters for all four Mini-YGDAI slots
EXT DC INPUT for redundant power supplies
Supports Dante redundancy (primary/secondary)

I/O Interfaces

Dante Ch: 64x64
24-bit, 32-bit

See the product

Roland

Roland – M-5000C

The Roland M-5000 live mixing console unlocks a completely new realm of flexibility. The console's internal mix architecture is not fixed and can be freely defined within a range of up to 128 input/output channels/busses, including the use of one or two Roland XI-Dante cards (with up to 64 channels each). The Roland M-5000 live mixing console unlocks a completely new realm of flexibility. The console's internal mix architecture is not fixed and can be freely defined within a range of up to 128 input/output channels/busses, including the use of one or two Roland XI-Dante cards (with up to 64 channels each). This allows the user to essentially “build” a console structure based on the immediate needs of the application. The M-5000 is the first offering in Roland's new approach to audio equipment called O.H.R.C.A. or Open High Resolution Configurable Architecture. It conforms to the needs of both the application and the operator by delivering freely definable audio paths, flexible user interface and workflow, expandable protocols, and multi-format I/O choices —all delivered at a pristine 24-bit / 96kHz sound quality. This achievement in an ideal frame size opens a new generation in live sound solutions. Extensibility

Unrestricted patching for up to 300/460 inputs and 296/456 outputs (96kHz/48kHz)
Support for a wide range of protocols and formats including REAC, Dante, MADI, and Waves SoundGrid
Full compatibility with the family of Roland Professional Audio snakes, personal mixing, and multi-channel playback/recording

High Resolution

Outstanding 24-bit, 96kHz sound quality
High-precision 72-bit linear summing circuitry
High-end discrete preamps onboard and available in remote snake options

Surface Design

12" touch screen with “touch and turn” operation
20 freely scrollable, isolatable, or assignable faders
Numerous knobs and buttons, both contextual and assignable, to support rapid response
Dedicated, freely assignable user section

Mixers

Dante Ch: 64x64
24-bit

See the product

Tannoy

Tannoy – QFlex 32LS

The QFlex 32LS column loudspeakers are designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. The QFlex 32LS column loudspeakers are designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. These new QFlex life safety models are specifically intended to optimise voice reinforcement, and as a result make them more affordable, and therefore applicable, to a wider range of projects. The QFlex 32LS contains a combination of 4-inch and 3-inch low frequency drivers, distributed over the equivalent length of the QFlex 48, and an eight-way tweeter array of 1-inch drivers. Each driver is individually powered by one of 32 discrete channels of integrated 100 Watt (RMS) Class D amplification and DSP. The QFlex 32LS offers a horizontal dispersion pattern of 120 degrees and a vertical range of between 5 and 100 degrees, along with a beam steering range of ±70 degrees. Low frequency control is effective down to 200 Hz even with the fewer number and increased spread of drivers that are required for the power saving essential in the life safety environment

Speakers

See the product

Tannoy

Tannoy – QFlex 16LS

The new QFlex 16LS column loudspeaker is designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. The new QFlex 16LS column loudspeaker is designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. These new QFlex life safety models are specifically intended to optimise voice reinforcement, and as a result make them more affordable, and therefore applicable, to a wider range of projects. The QFlex 16LS makes use of a fewer number of wider bandwidth 4-inch low frequency drivers than the equivalently sized QFlex 40 model to achieve an emphasis on the speech band only, over an effective distance of up to 70 metres. Each of the 16 drivers is controlled by its own discrete channel of 100 Watt (RMS) Class D amplification and cutting edge DSP, the reduced driver count and wider spacing enabling a 50% reduction in power consumption. The QFlex 16LS provides a beam steering range of ±40 degrees with effective low frequency control down to 230 Hz. Dispersion is nominally 120 degrees horizontal and a vertical range of between 5 degrees and 100 degrees, either symmetrical or asymmetrical.

Speakers

See the product

Tannoy

Tannoy – VNET2-Dante Bridge

The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply. The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply. Dante is an audio networking technology developed by Audinate. It allows many channels of uncompressed digital audio, and control data to be conveyed down a standard Ethernet network. The VNET2 Dante Bridge allows VNET2 devices to be seamlessly integrated into Dante systems with the minimum of fuss. Analog outputs also allow the Dante Bridge to be used with products that do not have VNET2 Interfaces, such as 1st generation VNET speakers and SC1 controllers. The three primary uses for the Dante Bridge are:

Dante audio to AES3 conversion with VNET control (for use with VNET2 equipped products – currently only Tannoy QFlex)
Conversion of Dante audio to analogue audio with VNET™ control (for use with VNET equipped products)
Conversion of Dante audio to analogue audio (for Dante break-out to any product with analogue inputs)

I/O Interfaces

Dante Ch: 2 In
24-bit

See the product

Yamaha

Yamaha – MRX7-D

Sound system requirements for corporate conference rooms, educational facilities, shopping malls, and a variety of other environments are becoming increasingly large and complex. The MRX7-D offers outstanding control efficiency and flexibility for a broad spectrum of audio installations. Sound system requirements for corporate conference rooms, educational facilities, shopping malls, and a variety of other environments are becoming increasingly large and complex. The MRX7-D offers outstanding control efficiency and flexibility for a broad spectrum of audio installations. Features: AEC (Acoustic Echo Canceller) for remote conferencing systems, automatic mixing for multiple microphone inputs, a speech privacy function that can mask conversations in hospital or corporate systems where confidential information must be protected, and more. The MRX7-D offers a comprehensive range of components that offer effective solutions for a variety of issues faced in today’s audio installations Built-in Dante digital audio networking capability makes it easy to set up systems of just about any scale while significantly reducing cabling cost and labor. Dante capable devices can be added to the system at any time, allowing flexible reconfiguration and expansion as needed. As the scale and control requirements of an audio system grow, the number of devices required and overall complexity increase correspondingly. With the MRX7-D and dedicated MTX-MRX Editor software, input and output devices can be quickly arranged via a software wizard and internal MRX7-D processing components can be combined as needed. One simple software application provides everything needed for comprehensive system design and management.

DSPs (Digital Signal Processors)

Dante Ch: 64x64
24-bit

See the product

Aviom

Aviom – Mix320-D

The Mix320-D Personal Mixing System has been designed specifically for use with Dante™ enabled consoles and networks. It includes everything you need to create a personal mixing system for six performers. The Mix320-D Personal Mixing System has been designed specifically for use with Dante™ enabled consoles and networks. It includes everything you need to create a personal mixing system for six performers. The Mix320-D Personal Mixing System makes it easy to add Aviom monitoring to a Dante-enabled mixing console or audio network. No analog input module or console card is required; inputs get patched directly from your Dante network. The Mix320-D system includes a D400-Dante A-Net Distributor that allows up to 32 channels to be patched from the Dante network to the personal mixing system inputs. The D400-Dante is also used to supply A-Net digital data and DC power to the mixers. The Mix320-D system includes six A320 Personal Mixer for the performers, plus six MT-1a Mic Stand Mounts for attaching the A320 mixers to mic stands, as well as all the Cat-5e cables you'll need to connect the products.

Personal Mixing & Monitoring

Dante Ch: 32 In
24-bit

See the product

RTS

RTS – KP-5032 Keypanel

The KP-5032 keypanel delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-5032 delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology. The KP-5032 keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.

Intercoms

AES67 Enabled

See the product

Medialon

Medialon – MAS Pro Dante

MAS Pro Dante is designed to ensure maximum reliability for demanding live entertainment and attraction audio playback, as well as for centralized playback and control of large amount of audio channels in museums or showrooms. MAS Pro Dante is designed to ensure maximum reliability for demanding live entertainment and attraction audio playback, as well as for centralized playback and control of large amount of audio channels in museums or showrooms. MAS Pro Dante is a Professional audio server for both multi-track applications as well as multi-zoning. Each of its Dante output channels can be synchronized together individually or by groups, and can be controlled independently or by groups. Its high quality Dante interface provides state-of-the-art audio quality. It can be synchronized to time code through a Medialon Control System. Although MAS Pro Dante includes a remote application to upload media and start media individually, its capabilities expand when controlled by a Medialon Control System.

Digital Recorders & Players

See the product

Focusrite

Focusrite – RedNet D16R

RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network. RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network. Perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and any Dante network, RedNet D16R has SRC (Sample Rate Conversion) on each input pair allowing plug-and-play operation with any AES3 source. Word Clock I/O and DARS (Digital Audio Reference Signal) connections allow synchronisation with a wide range of external sources and hardware, while S/PDIF I/O allows the integration of equipment such as CD or solid-state recorders/players. Key features

16 Channel bi-directional RedNet AES3 Interface for Dante Networks.
Power supply and Ethernet redundancy with auto switchover in case of failure, and locking etherCON network connectors.
Sample rate conversion allows external equipment to run at any sample rate.
Compact 1U chassis allows maximum functionality in minimum rack space.
Two 8-channel AES59 combined I/O DB25 connections, plus a pair of XLR3 connectors duplicating channels 1 & 2.
Rear panel XLR input connector either be used as a DARS input or as a traditional AES3 audio input.
S/PDIF input and outputs provided on RCA connectors; ideal for connecting CD players or solid-state recorders.
Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network.
RedNet Control and Dante control software allow routing and control from your audio computer system via a software control panel – no hardware patching required.

I/O Interfaces

Dante Ch: 16x16
24-bit

See the product

Focusrite

Focusrite – RedNet D64R

RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante. RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante. With sample rate conversion on all input and output channels, it's simple to add MADI to connect MADI-enabled equipment with a Dante network. Both optical and coaxial connections are provided for MADI, alongside word clock connections, which allow the Dante network to synchronise with other digital audio equipment. Key features

Connects a MADI system and a Dante network seamlessly together.
Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices.
Built-in redundancy with dual locking power and etherCON network connectors.
Supports both coax and optical interfaces – connect simply to any MADI equipment.
Slave either the Dante system or MADI streams to an external clock.
Supports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz.
Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates.
Simple 1U rack-mount module with the classic red aluminium faceplate.
RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.

I/O Interfaces

Dante Ch: 64x64
24-bit

See the product

Focusrite

Focusrite – RedNet HD32R

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.

Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX .
Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors.
Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD.
Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces.
Permits multiple workstations to access the same interface hardware and I/O.
No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs.
Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R.
Additional Avid/Digidesign interfaces may be connected to expansion ports.
Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions.

I/O Interfaces

Dante Ch: 32x32
16-bit, 24-bit

See the product

Jünger

Jünger – Stereo Audio Processor D*AP4 LM EDITION

With 4 processing channels and optional logging features, the D*AP4 LM EDITION is the ideal solution for automatic and intelligent loudness management in real-time stereo TV or radio broadcast playout environments. Jünger Audio’s Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. With 4 processing channels and optional logging features, the D*AP4 LM EDITION is the ideal solution for automatic and intelligent loudness management in real-time stereo TV or radio broadcast playout environments. Jünger Audio’s Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Flexible I/O options include AES, 3G SDI, MADI, Dante™ and analog. Standard processing blocks include: Level Magic™ loudness management, compressor, expander, parametric EQ, automatic fail over and voice over functionality. Optional features are: Spectral Signature™ dynamic EQ, de-esser and FM conditioning. An intuitive web interface provides control from anywhere in your network including mobile devices. All system parameters are remotely accessible allowing the unit to be integrated and operated by broadcast control systems. An advanced built-in Event Management tool allows the loading of presets either by GPIOs, network triggers or the optional X*AP remote panel.

DSPs (Digital Signal Processors)

Dante Ch: 8x8
24-bit

See the product

atlas-sound-hpa2602_1200px|atlas-sound-hpa2602_1200px

AtlasIED

AtlasIED – HPA2602

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads. The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluxuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.The HPA Series features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante™ 2-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Starr standards with only drawing 1W of power in standby mode.Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the Atlas Sound HPA Series is the answer for high power/cost effective amplification needFeatures

70.7V and 2Ω, 4Ω, and 8Ω Output Configurable
Balanced Inputs Euro Block Phoenix Style Connector
High Efficiency Fan Cooling
Remote Turn On
Accessory Card Slot for Optional Dante™ Digital Network Audio Card
Short-Circuit, Temperature, and DC Offset Protection
Soft Clip Limiter Protection
Stepped Attenuators with Security Covers
Stereo, Bridge, or Parallel Operating Modes Selectable via Rear Mounted Switch
Auto Sensing 120V/220V AC Mains Power Supply
Meets Energy Star Standards - 1W Standby Mode

Amplifiers

Dante Ch: 2 In
16-bit, 24-bit, 32-bit

See the product

atlas-sound-168AECDT_1200px|atlas-sound-168AECDT_1200px

AtlasIED

AtlasIED – BB-168AECDT

The BlueBridge® BB-168AECDT DSP audio processor with Acoustic Echo Cancellation and Dante™ is a powerful and flexible tool offering mission critical solutions to successfully satisfy your customers’ teleconferencing and video conferencing needs. The BlueBridge® BB-168AECDT DSP audio processor with Acoustic Echo Cancellation and Dante™ is a powerful and flexible tool offering mission critical solutions to successfully satisfy your customers’ teleconferencing and video conferencing needs. Engineered to strict standards with the highest quality internal components, BlueBridge® DSP solutions provide pure clean analog and digital audio, Ethernet connectivity for cost effective TCP/IP control and open architecture with Drag and Drop programmability. Atlas Sound offers the widest range of open architecture DSP platform I/O configurations of any manufacturer in the industry, all configured using the same software.The BlueBridge® AEC model with the Dante™ digital audio network chipset offers up to 16 channels of self-configuring, true plug-and-play digital audio over an Ethernet network providing the highest quality audio over existing network infrastructure.Features

Wide-Band Acoustic Echo Cancellation
Dante™ Ethernet Based Digital Audio
True Plug-and-Play Digital Audio Networking
16x8 I/O Configuration
Open Architecture Programmability
High Quality THAT® Corporation Mic Preamps
TCP/IP Third Party Control Capability
Four Logic Inputs & Outputs
48KHz, 40 Bit Floating DSP Engine
Remote Control Using Optional Wall Plates
Output Peak & Signal Indicator LEDs
Safety Listed to UL60005

DSPs (Digital Signal Processors)

Dante Ch: 16x16
24-bit

See the product

AtlasIED

AtlasIED – HPA4202

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads. The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads. The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluxuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage andcurrent to virtually any speaker load.The HPA Series features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante™ 2-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Starr standards with only drawing 1W of power in standby mode.Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the Atlas Sound HPA Series is the answer for high power/cost effective amplification needFeatures

70.7V/100V and 2Ω, 4Ω, and 8Ω Output Configurable
Balanced Inputs Euro Block Phoenix Style Connector
High Efficiency Fan Cooling
Remote Turn On
Accessory Card Slot for Optional Dante™ Digital Network Audio Card
Short-Circuit, Temperature, and DC Offset Protection
Soft Clip Limiter Protection
Stepped Attenuators with Security Covers
Stereo, Bridge, or Parallel Operating Modes Selectable via Rear Mounted Switch
Auto Sensing 120V/220V AC Mains Power Supply
Meets Energy Star Standards - 1W Standby Mode

Amplifiers

Dante Ch: 2 In

See the product

ied-1542NA-D_600px_0|ied-1542NA-D_600px_0

AtlasIED

AtlasIED – IED1542NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1542NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.The 1542NA-D provides two outputs, each with 4 watts of power into an 8Ω load. This makes the module ideal for powering small zones that are made up of only a few low-powered loudspeakers.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1542NA-D model allows the use of Dante™ audio networking protocols.The 1542NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features

Available in single-channel or two-channel configurations
Available with Dante™ audio network interface
Control and configure using a web browser and GLOBALCOM® System Management Center
Settings storage in non-volatile memory
Full integration with theAtlasIED GLOBALCOM® vACS
Utilizes IEEE 802.af Power over Ethernet (PoE)
Removable connectors for easy installation
Rugged DIN-rail or panel/wall mount enclosure

Amplifiers

See the product

AtlasIED

AtlasIED – IED1581NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1581NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system. It provides a single output with 8 watts of power into an 8Ω load.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1581NA-D model allows the use of Dante™ audio networking protocols.The 1581NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features

Available in single-channel or two-channel configurations
Available with Dante™ audio network interface
Control and configure using a web browser and GLOBALCOM® System Management Center
Settings storage in non-volatile memory
Full integration with theAtlasIED GLOBALCOM® vACS
Utilizes IEEE 802.af Power over Ethernet (PoE)
Removable connectors for easy installation
Rugged DIN-rail or panel/wall mount enclosure

Amplifiers

See the product

Dante-enabled Product Catalog

Categories

Manufacturer

Features

Specifications

Klotz – GRAPHITE TWO

Klotz – G2 Audio Engine

Taiden – HCS-8300MOD/FSD

Taiden – HCS-8300MOA/FSD

Taiden – HCS-8300MID/FSD

Taiden – HCS-8300MIA/FSD

Symetrix – xIn 4

Symetrix – xIO 4×4

Symetrix – xOut 4

Yamaha – RSio64-D

Roland – M-5000C

Tannoy – QFlex 32LS

Tannoy – QFlex 16LS

Tannoy – VNET2-Dante Bridge

Yamaha – MRX7-D

Aviom – Mix320-D

RTS – KP-5032 Keypanel

Medialon – MAS Pro Dante

Focusrite – RedNet D16R

Focusrite – RedNet D64R

Focusrite – RedNet HD32R

Jünger – Stereo Audio Processor D*AP4 LM EDITION

AtlasIED – HPA2602

AtlasIED – BB-168AECDT

AtlasIED – HPA4202

AtlasIED – IED1542NA-D

AtlasIED – IED1581NA-D

Stay connected to Dante

Support

Company

Dante Networking Alliance

Dante-enabled Product Catalog

Activating Third Party Apps