Cart
← Back to Product Catalog

AEQ – KROMA CrossNET 104

Intercoms

More details

Similar Products

ctp-systems-FWD8000f
  • CTP Systems

CTP Systems – FWD8000

The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector.  There is an 'all talk' key which can be set to talk to any or all of the four wire outputs. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required.  The FWD8000 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 1RU 200mm deep.
    Intercoms
  • Dante Ch: 16x18
See the product
m5422a_f_2000
  • Studio Technologies

Studio Technologies – Model 5422A Dante Intercom Audio Engine

The Model 5422A is suitable for use in fixed and mobile broadcast facilities, post-production studios, commercial and educational theater environments, and entertainment applications. Only power and Ethernet network connections are required for the Model 5422A to provide a powerful resource in a variety of Dante applications. The Model 5422A is available in two versions – one with 32 input and output channels and the other with 64 input and output channels.
• Dante audio-over-IP technology with AES67 and DDM support
• Creates multiple virtual party-line (PL) intercom circuits
• Special audio functions including summing, IFB, and audio switching
• Auto Mix for enhanced audio performance
• Perfect for REMI/At-Home production applications
• Two versions available: one or two 32-channel audio engines
• Three Gigabit Ethernet interfaces support independent redundant Dante and management networks
• Webpage management and USB flash drive software updating
• AC mains and 12 volts DC powering
• Lightweight enclosure, single rack-space (1U) mounting

    Intercoms
  • Dante Ch: 64x64
  • 16-bit, 24-bit, 32-bit
See the product
rts-KP5032_1200px
  • RTS

RTS – KP-5032PB Keypanel

The KP-5032PB is a 32-Position HD Color Display Keypanel with pushbutton that delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-5032PB delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.

The KP-5032PB keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.

    Intercoms
  • AES67 Enabled
See the product