Cart
← Back to Product Catalog

AEQ – KROMA Series 8000

Intercoms

More details

Similar Products

ctp-systems-FWD6006s|ctp-systems-FWD6006s
  • CTP Systems

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required. The FWD6006 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 100mm high, 180mm deep, 200mm wide.
    Intercoms
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
M5312
  • Studio Technologies

M5312

The Model 5312 is a rack-mounted unit that is designed to serve as an audio control center for production and support personnel in numerous applications, including on-air television sports and news broadcasting, live events, theater, industrial, aerospace, and corporate AV.
    Intercoms
  • Dante Ch: 16x16
  • 16-bit, 24-bit, 32-bit
See the product
glensound-beatrice_1200px|glensound-beatrice_1200px
  • Glensound

Glensound – Beatrice Mix32

The Glensound BEATRICE MIX32 is a high density audio mixer for producing fixed ratio audio mixes from/ to Dante and AES67 audio networks.  The Glensound BEATRICE MIX32 is a high density audio mixer for producing fixed ratio audio mixes from/ to Dante and AES67 audio networks. It can be fitted with a maximum of 4 independent mixer cards, each with their own redundant network interface. Each of these mixer cards provides 32 audio inputs and 32 audio outputs from the network, with the 32 outputs being mixes derived from different sets of input channels. Audio limiter/ compressor circuits are also provided for each input/ output. These can be turned on/ off globally as required via a simple front panel rotary encoder. The fixed ratio mixes in the Beatrice MIX32 were originally designed to allow network audio intercom systems to generate multiple listening circuits, however the high quality low noise, digital mixers can be also be used for many other applications. Being designed for 24/7 broadcast operation, the Beatrice MIX32 features both redundant power suplies and also redundant network interfaces.
    Intercoms
  • Dante Ch: 32x32
  • 24-bit
See the product