Dante-enabled Product Catalog

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

    The speakers use the Dante network audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. Provides the terminal playback function of the digital audio system. Suitable for primary and secondary classrooms, small and medium conference rooms, corridor broadcasting and other places.

The LA-218L compact line array module with built-in amplifier has two high-energy 18-inch ultra-low frequency units with continuous directional coverage. Designed for simple system construction, it can provide the best listening experience in the shortest time. And the entire series is fully integrated with Dante. With the speaker as a system carrier, it has fully integrated the functions of signal transmission, processing, power amplification and remote monitoring. It has abandoned a large number of physical equipment such as power amplifiers and peripheral processing equipment, and has realized network transmission, IT processing, and intelligent operation.

The digitally guided full-frequency sound column adopts a multi-channel high-current digital power amplifier with advanced dedicated coaxial transducers, and each transducer is equipped with a high-frequency array of three tweeters. "Array in an array" three tweeter designs shorten the distance between high-frequency sources, thereby greatly improving high-frequency performance through a continuous and wide horizontal distribution.

As long as it is simple and directly connected to the network, multi-channel digital audio transmission, user-controlled DSP, user-selectable presets, and comprehensive remote system management control can be achieved , and all use standard Ethernet hardware and cables.

With computer remote control, audio system technicians can make settings that cover almost all audience areas. Multiple beams can be set one by one, and a software-controlled DSP is designed to separate them from a single array: up to 4 beams. The acoustic center of the array can also be raised or lowered because all array elements are identical and equidistant. Suitable for large lecture halls, stadiums, theaters, etc.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

Features:

• Integration of power over Ethernet and audio data transmission, simplifying cable layout and complying with Ethernet engineering specifications;
• With high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics.
• ★ The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker and the voltage and current across the speaker at the PC.
• The sound column is made of wooden box, sandblasted surface treatment, the sound is loud and powerful.
• Automatically assign IP addresses through router DHCP;
• ★ Each receiving channel can be controlled independently and can be applied to any location on the LAN
• With perfect protection function (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clip limiter).
• ★ The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time.

Dante DP3 PoE Speaker is equipped with POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power from any Ethernet switch of 802.3 or above standard. Dante DP3 adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality on this compact speaker of low power design. The system is built with a plastic body and 4pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. Dante DP3 integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC or Mac by DS Controller Software.

Features:

1. Built-in Dante module
2. Built-in power amplifier module and system efficiency > 70%
3. DSP controlling software
4. PoE power supply
5. Over-current protection, Thermal protection and Overload protection

Dante DP PoE Speaker is multifunctional with either POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Features

1). PoE-based active speaker P14CA(ceiling) is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

Features

1). PoE-based active speaker P14WA is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

The PE-66 digital network flat panel speaker has a built-in PoE active audio power module. It follows the latest PoE technology standards and uses the international mainstream mainstream high-performance digital media DANTE network to achieve excellent sound, simple wiring, flexible use, simple maintenance, and easy management , Economic and energy saving features, through a network cable to achieve distributed power supply, audio signal transmission, integrated control and other functions. This product is suitable for indoor, corridor wall hanging, customized features, conference rooms with 60 * 60 ceilings and other places.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

The X115 is a self-powered 2-way high-end cardioid subwoofer, which features 1 x 15" ported woofer at the front and 1 x 12" ported woofer at the rear side. The power output of 4000 W (RMS) ensures for very high SPL down to a frequency of 35 Hz. The subwoofer features a unique software controllable cardioid radiation pattern. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern denition is the most comprehensive and powerful loudspeaker management system on the market. The X115 can be combined with all products of the CADAC beam forming range. It can be used as ground stack horizontal subwoofer array as well as flown together with the X310 or X606 system in large venues for very high SPL demands in concert applications. Internally, one X115 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto- EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area. Due to the fully integrated connection hardware, the subwoofer can be arrayed to realize larger systems with up to 7.2 meters of acoustic length.

The X310 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the X310, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The X310 is a self-powered 3-way high-end beam forming array loudspeaker, which features 3 x 10" ported woofers for LF, 6 x 5" woofers for the MF and 13 x 1" compression drivers for the HF, which are mounted onto waveguide horns. The X310 can be used as single cabinet with programmable vertical dispersion (point source functionality) and as beamforming array for fixed installation as well as for mobile applications. If one X310 is combined with one X310-CARDIOID cabinet, the system will have cardioid dispersion for the LF range. The array is used as straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection hardware, the cabinet can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X310 has 22 amplifier and 22 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X310 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 3 x 10" ported woofers and unique software controllable cardioid radiation pattern. The power output of 1500 W (RMS) ensures for very high SPL down to a frequency of 60 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern definition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension for the X310. It shares the same outer dimensions and flyware and can be own together with the X310 as one line like conventional LF extensions or flown behind the X310 with the cardoid flying frame to set up a beamforming cardoid line array system. Due to the fully integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length. Internally, one X310 CARDIOID has 3 amplifier and 3 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X606 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 6 x 6.5" ported woofers and unique software controllable cardioid radiation pattern. The power output of 1200 W (RMS) ensures for very high SPL down to a frequency of 75 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern definition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension for the X606. It shares the same outer dimensions and flyware and can be flown together with the X606 as one line like conventional LF extensions or flown behind the X606 with the cardoid flying frame to set up a beamforming cardoid line array system. Due to the fully integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length. Internally, one X606 CARDIOID has 6 amplifier and 6 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X606 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the X606, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The X606 is a self-powered 3-
way high-end beam forming array loudspeaker, which features 6 x 6.5" ported woofers for LF, 12 x 3.5" woofers for the MF and 24 x 1" dome tweeters for the HF. The X606 can be used as single cabinet with programmable vertical dispersion (point source functionality) and as beamforming array for fixed installation as well as for mobile applications. If one X606 is combined with one X606-CARDIOD cabinet, the system will have cardioid dispersion for the LF range. The array is used as straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X606 has 42 amplifier and 42 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The CP124 beam forming array module with internal passive crossovers between LF and HF way. It is intended as basic beamforming column loudspeaker for the CADAC product range. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CP124 is a self-powered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 12 passive crossovers, for 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. Internally, one CP124 has 12 amplifier and 12 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The CA124 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the CA124, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CA124 is a selfpowered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one CA124 has 48 amplifier and 48 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

The S215 is a self-powered high-end subwoofer, which features 2 x 15" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 40 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S215 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

The AMK DT64-B-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

One PoE amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with (2) speakers per audio zone.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications. The DT64-B-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.

The AMK DS81-A-X is a Dante™ audio network addressable and self-amplified ceiling speaker system. The speaker is powered by PoE+ network switch meaning no external power supply is required.

The speaker includes a Class D amplifier which provides effective use of power. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The system comes with 8” coaxial 40W loudspeaker driver, CX802, that has excellent dispersion, wide bandwidth and a smooth frequency response makes this the top choice for today’s overhead commercial applications.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

This assembly can be used in wide range of projects for paging and background music applications. The DS81-A-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.

The AMK DT84-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

One PoE+ amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with one separate audio channels for each speakers.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

The CX802 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications. The DT84-C-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.

The DLI-330 is an electronically controllable line source speaker from the award-winning Focus series. The elegant high-performance speakers are the very first choice for professional voice and music applications. Thanks to the Fohhn Beam Steering Technology, they can be integrated almost invisibly and offer the best results in complex acoustic environments.

Main features

• 24 × 4" high performance driver (frequency response: 60 Hz – 17 kHz)
• Built-in 24-channel digital amplifier, 24 DSP channels
• SPL max.: 133 dB
• Convenient real-time control of vertical dispersion with Fohhn Audio Soft
• Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
• Acoustic centre displaceable over entire line length
• Fohhn Two Beam Technology (two independent dispersion beams)
• Fohhn Side Lobe Free Technology (suppression of side lobes)
• User DSP with 10-band parametric EQ, X-over, delay, compressor etc.
• Available in RAL, NCS, Pantone and with Fohhn Texture Design
• Easily combined with active and passive Fohhn subwoofers
• Integration in evacuation systems according to DIN EN 60849 / VDE 0828
• Integration in media controls such as Crestron, AMX, Extron and more.
• Green power standby mode

The DLI-430 is an electronically controllable line source speaker from the award-winning Focus series. The elegant high-performance speakers are the very first choice for professional voice and music applications. Thanks to the Fohhn Beam Steering Technology, they can be integrated almost invisibly and offer the best results in complex acoustic environments.

Main features

• 32 × 4" high performance driver (frequency response: 60 Hz – 17 kHz)
• Built-in 32-channel digital amplifier, 32 DSP channels
• SPL max.: 136 dB
• Convenient real-time control of vertical dispersion with Fohhn Audio Soft
• Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
• Acoustic centre displaceable over entire line length
• Fohhn Two Beam Technology (two independent dispersion beams)
• Fohhn Side Lobe Free Technology (suppression of side lobes)
• User DSP with 10-band parametric EQ, X-over, delay, compressor etc.
• Available in RAL, NCS, Pantone and with Fohhn Texture Design
• Easily combined with active and passive Fohhn subwoofers
• Integration in evacuation systems according to DIN EN 60849 / VDE 0828
• Integration in media controls such as Crestron, AMX, Extron and more.
• Green power standby mode