Dante-enabled Product Catalog
2 input balanced line level Dante™ interface. 2 XLR female, 1 RJ45, PoE.
2 input balanced line level Dante™ interface. 2 XLR female, 1 RJ45, PoE.
- 2 Channels of balanced audio input to Dante™ networks.
- Professional Line Levels.
- Power Over Ethernet
- Configure with Dante™ Controller, no other software required.
Distributed exclusively in the U.S. by
BTX Technologies.
The PNA-D2 is a PacketAV™ Series Dante™ POE+ Two Channel Class-D Network audio amplifier.
PNA-D2 is the first product in Visionary’s new PacketAV™ line of network AV endpoints. It is a (4/8 ohms) per channel network amplifier with Dante™ input that is powered via POE+, no external power supply required. It is a robust unit suitable for industrial, commercial and Pro AV installations. The unit is inherently a network device allowing it to deploy easily and enable precise control of your sound. Two independent channels can be sourced using any Dante™ audio on the network using Dante™ Controller software or other third party software. This unit is Class D to allow for efficient use of power.
Distributed exclusively in the U.S. by
BTX Technologies.
The RedNet AM2 is a compact stereo monitoring unit combining a high-gain headphone amplifier with line outputs for flexible monitoring of signals from a Dante network.
The RedNet AM2 is a compact stereo monitoring unit combining a high-gain headphone amplifier with line outputs for flexible monitoring of signals from a Dante network. RedNet AM2 features a ¼" front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.
Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.
RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.
Dual locking etherCON connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply.
Key Features
- Cost-effective headphone/loudspeaker stereo monitoring solution for Dante offers lower system deployment costs
- Superb digital to analogue conversion provides transparent and accurate audio quality
- Powerful headphone amp delivers plenty of level even with high-Z headphones for maximum high-quality audibility
- Independent headphone/line output level controls for maximum control
- Line output mute switch instantly kills the signal to external speakers or power amps
- Integrated Gigabit Ethernet switch allows connection of a second device for simpler cabling
- Built-in mic stand mount plus non-slip feet – mount RedNet AM2 to a mic stand or place securely on a surface
The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs.
The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs. The AES3 output allows the Bridge to be used with products which have an AES3 input. The BvNet connection also allows equipment which has a BvNet control interface to be controlled over an Ethernet network, to which the PodWare application will connect directly.
- Two analog outputs
- AES3 output
- Ethernet control for BvNet products
- Rugged steel enclosure
- Free-standing or rack-mount options
- Power Over Ethernet (PoE)
- Optional power by companion PSU
The control data within Dante is bidirectional, and can flow from the Dante network to a BvNet device and vice-versa. Similarly, digital audio channels within the Dante network can be routed to the BvNet socket, so that the AES3 signal is conveniently available on the BvNet network, where it can be brokenout using a special cable for use as an AES3 feed. The same audio channels are also available on analog outputs for use with any devices with analogue inputs.
- Dante Ch: 2x0
- AES67 Enabled
AES to Dante and MADI conversion whenever you need it: Network I/O AES provides 32 Pairs of AES3 audio I/O connectivity to redundant Dante network connections.
AES to Dante and MADI Conversion Whenever You Need it
Network I/O AES provides 32 Pairs of AES3 audio I/O connectivity to redundant Dante network connections. Sample Rate Convertors allow seamless integration of unlocked AES3 sources. As with all Network I/O products redundant PSUs and Dante connections complete the broadcast specification. Additional coax and dual optical MADI connection, along with internal channel by channel routing provide additional format conversion options.
- Dante Ch: 64x64
- 24-bit, 32-bit
Orange Box With DiGiCo's compact 2U Orange Box, you can use DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire.
Orange Box With DiGiCo's compact 2U Orange Box, you can use DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire. The Orange Box has 2 PSUs for redundancy, and 2 slots to accommodate any of our ten different interfaces that allow you to convert pretty much any format to another.
How? We have Slot A and Slot B, let's say you have MADI on your product, but you want to go to Dante. No problem, just buy a DMI with MADI, and a DMI with Dante, connect them up via the two slots, and away you go.
It's the same with Hydra 2, Optocore, Aviom, AES, Analogue, and so on. This cool little ‘anything in, anything out' box essentially gives you a choice of Multichannel user interfaces that enable you to send audio wherever you want, in whatever format you choose.
- Dante Ch: 64x64
- 48kHz-96kHz
The DASR-288 is a digital audio transport system utilizing Audinate’s Dante™ network audio solution.
The DASR-288 is a digital audio transport system utilizing Audinate’s Dante™ network audio solution. The DASR-288 connects to your network with a single Ethernet cable. It is a Dante Break Out / ecoder interface in a 2RU form factor designed for all types of commercial AV installations. It offers eight channels of line-level analogue in and 8 line-level analogue outputs. Precision 24-bit A-D and D-A converters are used for superb audio performance with a 119dB dynamic range at sample rates up to 192kHz. This product is used as the audio matrix, each having eight inputs, where you can send uncompressed audio with low latency using standard TCP/ IP Ethernet network. It’s remotely controlled via the network and can be placed anywhere in a facility. Unique to the DASR-288 is its Data tunneling. No other manufacturer offers this feature, which allows you to transport with the Digital audio, 8 contact closures in and 8 contact closures out together combined with either RS-232C serial data.
Each of the 8 balanced analog inputs and 8 outputs may be assigned to any Dante flow in the system, either by means of the Audinate’s Dante Controller Windows or OSX application or Inter-M’s own S-Connect Windows Software. The S-Connect allows for system configuration as well as easy channel switching. The S-Connect Software is designed to operate by simple touch screen.
Dual redundant Gigabit Dante Network connections are available. Both primary and secondary connections support full Gigabyte ports for full redundancy. Signal Monitoring is available for all 8 inputs and 8 outputs with a front panel mounded dual LEDs, indicating signal presence and clipping. Network status LEDs also monitor network connectivity and transition speed. Brand Interoperability Based on industry standards, Audinate’s Dante, is an uncompressed, multi-channel digital media networking technology, with near-zero latency and synchronization. Dante is the preferred audio networking solution that has been adopted by more pro-audio AV manufacturers than any other networking technology. Interoperability is a reality today. The Inter-M DASR-288 is compatible with hundreds of other Dante-enabled products available from the world’s leading manufacturers, enabling you to mix devices from multiple manufacturers.
With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards.
Note: This product is not sold separately. It is an option card for Dante compatibility with Junger's product suite.
With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards.
Thus, it is possible to add advanced audio processing to your Dante™ network and bridge to other interface standards like AES/EBU, 3G SDI, MADI and analog.
The Dante™ option board user interface is capable of displaying all signal names and labels within the D*AP device to make the routing as easy as possible. Further, the network configuration can easily be set up.
D*AP devices equipped with this option board may work as sync slaves or can operate as a clock master (preferred master) for a Dante™ network. When configured as a sync master, it is possible to sync a Dante™ network to a SDI video signal.
Utilizing Aurora’s IPBaseT™ technology, which combines various IP/AV standards to work together as one, the IPX-TCW3 Series provides one of the most advanced IP Streaming solutions on the market.
Utilizing Aurora’s IPBaseT™ technology, which combines various IP/AV standards to work together as one, the IPX-TCW3 Series provides one of the most advanced IP Streaming solutions on the market. It is the industry’s first 4K2K IP wall plate with zero compression and latency based on BlueRiver NT™ platform. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The IPX-TCW3 Series can be set up as either one to make installation, inventory, and troubleshooting easier.
Another industry first is the option slot to add other IP capabilities, like ExtremeUSB® (USB 2.0 over IP) or Dante® audio, for a more complete, distributed system. Audio, video, data, and control can be sent securely to one or many IPX-TCW3 transceiver units using off-the-shelf 10G Fiber or CAT Ethernet switches.
When the IPX-TCW3 is set up to be a transmitter, the 2 HDMI inputs become a source switch and the HDMI output becomes a potential loop out. When set up as a receiver, a user can select the local HDMI inputs or an IP source. Seamless switching of the sources further enhances the presentation. Regardless of how the IPX-TCW3 is set up, the audio can be de-embedded at any location, break away, and/or be sent to or received from a Dante® enabled device. The USB 2.0 option is also flexible, working as a KVM and/or a high-speed data transfer (480Mbps) for memory sticks.
Choice is important. That’s why the IPX-TCW3-F has an SFP+ port that can use single or multi-mode fiber and the IPX-TCW3-C can use Category 5e/6/6A – making the IPX-TCW3-F the ultimate AV IP product on the market today.
The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs.
The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs.
The MC Dante also has on-board sample rate conversion for all 128 channels, as well as its own independent word clock with audio connections via co-axial.
Dual PSUs come as standard to ensure secure performance in critical network applications. As with the CDC MC MADI unit, the co-axial ports glow either red or blue for Rx (receive) or Tx (transmit) – enabling fast and accurate configuring of the MegaCOMMS network especially in low light.
The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet.
Features
- Easy to install with under table mounting
- Audio and control signals transported over Dante
- 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
- Provides Phantom Power for each mic input
- 4 control inputs compatible with all Clockaudio devices including:
- direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
- direct connection to ARM-C controller
- Open API for interfacing with Control Systems
- Compatible with any Dante capable audio DSP
The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats.
The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats. Each ES4R (receiver) can be configured for Dante® by simply changing the network module in the unit. The exceptional performance, ease of use, and extreme flexibility make the ES4 series products excellent I/O devices for any digital audio network. The typical Whirlwind ES4 system consists of two components: the
ES4T transmitter module, which has sixteen balanced mic/line inputs and eight line level outputs. The matching ES4R receiver module has sixteen line level outputs and eight line level inputs. All inputs have variable gain controls and LED level monitoring.
The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats.
The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats. Each ES4T (transmitter) can be configured for Dante® by simply changing the network module in the unit. The exceptional performance, ease of use, and extreme flexibility make the ES4 series products excellent I/O devices for any digital audio network. The typical Whirlwind ES4 system consists of two components: the
ES4R receiver module, which has sixteen line level outputs and eight line level inputs. The matching ES4T transmitter module has sixteen balanced mic/line inputs and eight line level outputs. All inputs have variable gain controls and LED level monitoring.
Featuring groundbreaking implementations such as Bitproof Support and the revolutionary Dante Interface, the N7000C is the most advanced technology in the field of professional audio hardware, while fully supporting the well-established high quality industry standards and providing the archive community with additional tools.
The N7000c provides a single high-quality interface that accepts up to four concurrent connections to analog replayer devices and delivers outstanding dynamic range, classic preamp modelling, Bitproof™ support and many other advanced features for the audio archive professional.
The exceptionally wide feature set and convenient form factor set the N7000c apart as a versatile and cost-effective solution for high quality audio transfers. The N7000c is the first interface of its kind to offer the security of Bitproof™ control, a feature in conjunction with NOA Record which eliminates interstitial errors by creating checksums in the DSP of the N7000c and comparing them against the written soundfile, and it can connect simultaneously with up to four replay devices of different types, such as record decks, reel-to-reel tape decks, Archéophone, and other analog players. Connections to player devices can be via RS232, 9pin and CAT5 through the integrated DANTE interface, which allows users to connect the laptop to the network to get eight uncompressed 192kHz LINEAR streams without needing PCI cards.
With its outstanding 122dB dynamic range, the N7000c handles typical archival transfers without requiring gain readjustment, and leaves more than enough foot- and headroom. Dynamic adjustments can be left to simple server side normalisations which can be done without raising the noise floor in the analogue domain, making transfer workflows much more efficient.
The cost effective xOut 4 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel.
The cost effective xOut 4 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog outputs’ parameters (mute), along with bus
assignments, are configured using Symetrix Composer open architecture software. xOut 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xOut 4 may be surface mounted.
Features
- Audio output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
- costs down.
- 4 line outputs with the industry leading performance specifications of Edge and Radius.
- Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
- Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
- Rack mount and surface mount kits sold separately.
The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel.
The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power) and four analog outputs’ parameters (mute), along with bus assignments, are configured using Symetrix Composer open architecture software. xIO 4x4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIO 4x4 may be surface mounted.
Features
- Audio input (A/D), output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring
- overall system costs down.
- 4 mic/line inputs, including +48 VDC phantom power, and 4 line outputs with the industry leading performance specifications of Edge and Radius.
- Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
- Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
- Rack mount and surface mount kits sold separately.
The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel.
The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIn 4 may be surface mounted.
Features
- Audio input (A/D) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
- costs down.
- 4 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Edge and Radius.
- Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
- Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
- Rack mount and surface mount kits sold separately.
The G2 audio engine hosts a DSP farm powerful enough for 32 equalizers, 32 dynamics, up to 256 mixing channels and a 64 x 64 mix minus matrix.
The G2 audio engine hosts a DSP farm powerful enough for 32 equalizers, 32 dynamics, up to 256 mixing channels and a 64 x 64 mix minus matrix. 21 plug-in positions can be equipped with analogue and digital interface cards, fiber optic transceivers and MADI cards. Audio-over-IP interface cards for DANTE-protocol (trademark registered for Audinate Pty Ltd) and Ethernet AVB will be available shortly.
The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs.
The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs. It provides versatile routing capability as well. Four Mini-YGDAI card slots allow cards for a wide variety of input/output formats as well as processing functions to be connected to a Dante network for live sound, broadcast, recording, post production, and other applications. The RSio64-D also supports remote setup from CL and QL series consoles.
Features
- Accepts a wide range of Mini-YGDAI input/output and processing cards
- Seven general routing presets, including routing between Mini-YGDAI cards
- Supports matrix patching from R Remote V3 or a CL/QL series console
- Sample rate converters for all four Mini-YGDAI slots
- EXT DC INPUT for redundant power supplies
- Supports Dante redundancy (primary/secondary)
- Dante Ch: 64x64
- 24-bit, 32-bit
The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply.
The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply.
Dante is an audio networking technology developed by Audinate. It allows many channels of uncompressed digital audio, and control data to be conveyed down a standard Ethernet network. The VNET2 Dante Bridge allows VNET2 devices to be seamlessly integrated into Dante systems with the minimum of fuss. Analog outputs also allow the Dante Bridge to be used with products that do not have VNET2 Interfaces, such as 1st generation VNET speakers and SC1 controllers.
The three primary uses for the Dante Bridge are:
- Dante audio to AES3 conversion with VNET control (for use with VNET2 equipped products – currently only Tannoy QFlex)
- Conversion of Dante audio to analogue audio with VNET™ control (for use with VNET equipped products)
- Conversion of Dante audio to analogue audio (for Dante break-out to any product with analogue inputs)
RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces.
RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.
- Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX .
- Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors.
- Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD.
- Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces.
- Permits multiple workstations to access the same interface hardware and I/O.
- No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs.
- Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R.
- Additional Avid/Digidesign interfaces may be connected to expansion ports.
- Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions.
- Dante Ch: 32x32
- 16-bit, 24-bit
RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante.
RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante. With sample rate conversion on all input and output channels, it's simple to add MADI to connect MADI-enabled equipment with a Dante network. Both optical and coaxial connections are provided for MADI, alongside word clock connections, which allow the Dante network to synchronise with other digital audio equipment.
Key features
- Connects a MADI system and a Dante network seamlessly together.
- Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices.
- Built-in redundancy with dual locking power and etherCON network connectors.
- Supports both coax and optical interfaces – connect simply to any MADI equipment.
- Slave either the Dante system or MADI streams to an external clock.
- Supports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz.
- Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates.
- Simple 1U rack-mount module with the classic red aluminium faceplate.
- RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.
RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network.
RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network. Perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and any Dante network, RedNet D16R has SRC (Sample Rate Conversion) on each input pair allowing plug-and-play operation with any AES3 source. Word Clock I/O and DARS (Digital Audio Reference Signal) connections allow synchronisation with a wide range of external sources and hardware, while S/PDIF I/O allows the integration of equipment such as CD or solid-state recorders/players.
Key features
- 16 Channel bi-directional RedNet AES3 Interface for Dante Networks.
- Power supply and Ethernet redundancy with auto switchover in case of failure, and locking etherCON network connectors.
- Sample rate conversion allows external equipment to run at any sample rate.
- Compact 1U chassis allows maximum functionality in minimum rack space.
- Two 8-channel AES59 combined I/O DB25 connections, plus a pair of XLR3 connectors duplicating channels 1 & 2.
- Rear panel XLR input connector either be used as a DARS input or as a traditional AES3 audio input.
- S/PDIF input and outputs provided on RCA connectors; ideal for connecting CD players or solid-state recorders.
- Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network.
- RedNet Control and Dante control software allow routing and control from your audio computer system via a software control panel – no hardware patching required.
The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Multiple audio I/O formats are supported including AES, SDI, MADI, Dante™ and analog.
The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Jünger Audio’s Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards.
Multiple audio I/O formats are supported including native AES along with optional 3G SDI, MADI, Dante™ and analog, allowing the D*AP8 TAP EDITION to also function as a bridge between different standards such as Dante™, 3G SDI or MADI.
The D*AP8 TAP EDITION audio processor features loudness control plus dynamic range processing for up to eight channels of audio. Optional Dolby® audio decoding and encoding including metadata management is also available, along with 5.1 Downmix and automatic Upmix features, sophisticated fail over and voice over solutions.
Additionally, Jünger Audio’s Spectral Signature™ dynamic equalizer, a powerful creative tool that allows adaptive control of the spectral balance of your content is a standard feature.
- Audio Embedders & De-Embedders
The D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional SDI, MADI, Dante™ and analog.
Developed in close cooperation with Dolby® Labs, the D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional 3G SDI, MADI, Dante™ and analog.
Designed for use in all areas of audio broadcast and distribution, Jünger Audio’s D*AP8 CODEC EDITION offers the functionality to decode and/or encode any current Dolby® audio bitstream and to effectively manage and emulate all Metadata parameters.
The D*AP8 CODEC EDITION has built in Dolby® decoding with metadata management and emulation as standard. Encoding is also available as an option. Network based loudness metering and voice over are standard whilst logging, automatic Upmix and fail over are optional.
The following Dolby® formats are supported: Dolby® E, Dolby® Digital Plus, Dolby® Digital, Pro Logic II, AAC, HE-AAC.
Providing an adaptable approach to digital audio processing, the D*AP8 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution.
Providing an adaptable approach to digital audio processing, the D*AP8 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution in an efficient and space saving form factor.
Designed to be easily upgradable through the installation of additional licenses, the D*AP8 FLX is a cost effective surround digital audio processor that can grow and expand to match the evolving needs of a wide range of applications.
Available processing options include: Level Magic™ loudness management, compressor, expander, parametric EQ, Spectral Signature™ dynamic EQ, automatic surround Upmix and
voice over functionality. The D*AP8 FLX can also be equipped with optional Dolby® decoding and encoding.
By combining multiple I/O interfaces, the D*AP8 FLX can also function as a bridge between different standards such as Dante™, 3G SDI or MADI.
- Audio Embedders & De-Embedders
- Dante Ch: 16x16
- 44.1kHz-48kHz
The Bose® ControlSpace® EP40-D 4-input Dante endpoint adds 4 mic/line inputs to a Dante-based network audio system. Front-panel indicators show channel gain/pad and phantom power status for easy troubleshooting.
The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT-5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. Setup and control, including like mic/line input
