Cart
← Back to Product Catalog

Klotz – G2 Audio Engine

I/O Interfaces

More details

Similar Products

audioscience-8-8m_1200px
  • AudioScience

AudioScience – Iyo Dante 8.8LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8LR provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

    I/O Interfaces
See the product
alcorn-mcbride-VP32K
  • Alcorn McBride

Alcorn McBride – V-Page VP32K

The VP32K is a paging station kit that allows you to create customized paging consoles with up to 32-zones of control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a microphone, microphone clip, and panel-mount XLR harness. Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate.  That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense. The VP32K is a paging station kit that allows you to create customized paging consoles with up to 32-zones of control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a microphone, microphone clip, and panel-mount XLR harness. A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room.
    I/O Interfaces
See the product
esi-planet22x
  • ESI

ESI – planet 22x

planet 22x is a revolutionary new audio interface that combines the most modern networking audio technology based on the popular Dante protocol with the requirements of a professional high end desktop recording audio interface in studio and in mobile environments. planet 22x is a revolutionary new audio interface that combines the most modern networking audio technology based on the popular Dante protocol with the requirements of a professional high end desktop recording audio interface in studio and in mobile environments. The audio interface is equipped with ultra high quality 24-bit / 96kHz AD converters with 118dB(a) dynamic range and 24-bit / 96kHz DA converters with 123dB(a) dynamic range. The two balanced analog line inputs can also be used with the integrated ultra low noise and precise professional microphone preamplifiers and the special Hi-Z instrument input stages. The balanced master line output can be controlled with a high precission master level step-potentiometer, plus there is a high quality headphone amplifier on the unit. planet 22x can be powered either via an included 12V DC power supply or via the network cable as a PoE (Power over Ethernet) device. This makes it possible to use the interface even when there is no power outlet close by. By supporting Dante, planet 22x combines and works with any other Dante devices in an IP audio network, which makes it also a cost effective solution to extend any existing network with additional audio channels, yet it has also been designed to be a flexible professional audio interface using the Dante Virtual Soundcard for any modern recording applications on both Mac and PC - in any professional studio environment. Features
  • Dante network audio interface with 2 analog inputs and 2 analog outputs
  • 2 balanced XLR / TRS combo inputs
  • 2 balanced XLR outputs
  • high end 24-bit / 96kHz AD converters with 118dB(a) dynamic range
  • high end 24-bit / 96kHz DA converters with 123dB(a) dynamic range
  • per channel professional low noise microphone preamplifiert with adjustable gain
  • +48V phantom power for connected microphones
  • per channel high quality Hi-Z instrument input stage
  • precise step-potentiometer to control the master output level of the line outputs
  • high quality adjustable headphone output
  • 12V DC power supply included
  • power supply via network cable possible (PoE / Power over Ethernet)
  • license of the Dante Virtual Soundcard for Mac / PC included
  • supports Windows 7, Windows 8.1 and Windows 10 with WDM and ASIO 2.0
  • supports macOS via CoreAudio
  • includes license of Deckadance LE from Stanton
  • includes Bitwig Studio 8-Track digital audio workstation software
  • dimensions roughly 17.5cm x 12.0cm x 4.5cm
    I/O Interfaces
See the product