Dante-enabled Product Catalog
YUAN's AV over IP solutions are designed to support various video and audio transmission protocols. From 1G to 25G, you can find solutions coming in different input interfaces and different number of channels. All product lines are supported with a same SDK package, users can switch their solutions fluently between X86 and ARM based SoC solutions.
YUAN's AV over IP solutions are designed to support various video and audio transmission protocols. From 1G to 25G, you can find solutions coming in different input interfaces and different number of channels. All product lines are supported with a same SDK package, users can switch their solutions fluently between X86 and ARM based SoC solutions.
- Dante Ch: 8x8
- 24-bit, 32-bit
The AMX N4321D-C Audio-over-IP Transceiver Card is a powerful solution for connecting independent IP and analog audio networks. With support for Dante, AES67, and PCM audio-over-IP streams as well as balanced and unbalanced analog audio, the N4321D can bridge all the most popular audio networks. Whether the project requires converting from PCM to Dante, Dante to analog, analog to AES67, or nearly any other combination of these technologies, this transceiver makes it easy to integrate SVSI solutions with other audio networks.
The fully routable AV over IP encoder supports resolutions up to 4K60 4:4:4 and dynamic HDR formats like HDR10 and Dolby Vision. It accommodates Video Walls up to 16x16 and features dual network inputs, including RJ45/PoE and SFP for fiber applications.
The Digitalinx IP IPEX5001-D transmits HDMI video and audio over a 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps with peak values up to 850Mbps. The IPEX5001-D is Dante enabled meaning that the encoder can on ramp two channel stereo audio either from the embedded HDMI audio stream or the analog audio 3.5mm input onto a Dante audio network.
Inarguably, the most versatile product in the AVPro MXnet 10-G SDVoE ecosystem is the AC-MXNET-10G-TCVR, a single SKU, dual-use configurable, advanced modular AV-over-IP encoding / decoding IP streaming solution.
- Dante Ch: 0x2
- 24-bit, 32-bit
The AC-MXNET-1G-DANTE-E is a Dante audio-compatible encoder designed for the AVPro Edge MXnet 1G Ecosystem. It shares the baseline configuration and technical profile with the AC-MXNET-1G-E but includes Audinate engineering for lossless ADC-DAC two-channel Dante audio encoding. This device encodes stereo audio from an HDMI video source while sending HDMI audio to an MXnet Decoder. Simultaneously, it places the Dante-encoded audio onto the Dante network for distribution to any Dante-enabled device throughout the site.
- Dante Ch: 2x2
- 16-bit, 24-bit, 32-bit
- Bolin Technology Co. Ltd.
Bolin’s D20 Series Dante AV Ultra transceiver device can be programmed as an encoder or a decoder. D20 Series is a single channel networked AV over IP transceiver that is fully compatible with Dante audio devices within a Dante ecosystem for HDMI sources up to 4K60Hz 4096 x 2160, with embedded audio and PTZ camera movement control via IP or IR pass-through. It provides audio and video streaming over a standard gigabit network and D20S/D20H models as decoders output baseband video, either HDMI or 12G SDI, to work in professional AV applications.
It features advanced high-quality YUV4:4:4, ProAV optimized JPEG2000 lossless video compression technology and HDCP 2.2 compliant achieves ultra-low latency with 100% audio video synchronization when paired using Dante AV encoder and decoder.
D20 Series Transceivers are encoder/decoder devices configurable via firmware update. It is part of the Bolin DanteAV camera/codec system, it delivers a high-performance virtual video matrix routing solution for presentation of multimedia, and live camera images, Dante 4k video content application such as demanding conference room and classroom applications.
- Dante Ch: 8x8
- 16-bit, 24-bit, 32-bit
The workhorse of AVoIP delivering 4K HDR over a standard 1Gb PoE network. Achieves the perfect balance between quality and price.
- Newest iteration of Dante compatible video solutions.
- 4K60 4:4:4 video encoding and decoding.
- Video, Audio, IR & RS-232 signal routing through Dante software tools
- Adds two channels of Dante audio that are interoperable with any Dante-enabled device.
- Works on common 1Gbps networks, avoiding cost and complexity of 10Gb solutions.
- Low latency (1 frame/16ms) perfect for IMAG and in room video distribution.
- HDCP 2.2 support including compatibility with HDCP2.3 devices.
- Device monitoring through Dante Director & Domain Manager.
- Backed by a 5-Year Product Warranty
- Can be mixed with JP4-60 Series non-Dante devices.
- Dante Ch: 2x2
- Dante AV Enabled
The workhorse of AVoIP delivering 4K HDR over a standard 1Gb PoE network. Achieves the perfect balance between quality and price.
- 1Gb 4K60 HDR PoE Decoder & Video Wall Processor
- Processes landscape and portrait video walls upto 16x16
- Onboard 4K/2K scaling allowing support for legacy displays
- Ultra-low latency including Genlock synchronization between devices
- Enhanced compatibility mode tailored for video conferencing hubs, laptops and commercial displays
- ARC/eARC Capture & Routing
- Connected device control via IR, RS-232-CEC
- Dante Ch: 2x2
- Dante AV Enabled
The AEQ SOLARIS is a compact, scalable and virtualisable multichannel audio codec with IP connectivity. It is designed for a variety of broadcast applications, including multiple STL (Studio-to-Transmitter Link) connections and remote contributions, allowing users to start with eight bidirectional stereo channels and expand up to 64 channels in the same 1U 19-inch rack unit. Its front panel features a full-colour, high-resolution display used to show general status of the unit as well as the configuration of the network interfaces and software versions, while the rear has five network ports to allow for traffic control, encoded audio (WAN) and local audio I/O separation through AES67/Dante. It boasts two AC power supplies and features local audio inputs and outputs that can connect with other audio devices using AES67/Dante.
It can also be installed as an application on a commercial server, or operate in a virtualised environment and controlled through a web interface. In order to achieve unified control with other AEQ audio codecs, it can also be controlled from AEQ’s ControlPhoenix software, while an API is available to integrate it with orchestrators and third-party applications. Apart from the recommended OPUS algorithm and the uncompressed PCM format, it incorporates the G711 and G722 algorithms to communicate with VoIP devices. For special uses, C and apt-X encoding algorithms are available.
- Magewell Electronics Co., Ltd.
Offers a seamless bridge between analog audio, software, and IP standards including Dante®, NDI®, SRT, and more. Provides a flexible, virtual audio matrix to allow routing or mixing of any analog or IP-based input channel to any output. Enables mixed-technology local and remote production workflows and ProAV installations.
- Dante Ch: 8x8
- 16-bit, 24-bit
The ENNE IP5100 receiver integrates seamlessly with the Dante AV-A platform for low-latency, high-quality video and audio transmission. It supports 4K UHD resolution (3840x2160@60Hz 4:4:4) and enables flexible signal routing and 16x16 video wall splicing. Compatible with HDCP 2.2/2.3, it handles both LAN and long-distance fiber connections effortlessly. Control options include PC, mobile apps, and central control boxes, making it ideal for home, classroom, conference, or broadcasting environments.
- Dante Ch: 2x2
- Dante AV Enabled
The ENNE IP5100 transmitter integrates seamlessly with the Dante AV-A platform for low-latency, high-quality video and audio transmission. It supports 4K UHD resolution (3840x2160@60Hz 4:4:4) and enables flexible signal routing and 16x16 video wall splicing. Compatible with HDCP 2.2/2.3, it handles both LAN and long-distance fiber connections effortlessly. Control options include PC, mobile apps, and central control boxes, making it ideal for home, classroom, conference, or broadcasting environments.
- Dante Ch: 2x2
- 44.1kHz-96kHz
CABOLO® One is an automatic reporting solution that efficiently transcribes and translates speech content in real-time, ensuring complete security. It is the only device with AI capable of recording, transcribing, translating, synchronising, indexing, and archiving audio and video in real-time, all while operating entirely offline. Designed for maximum data protection, it requires no internet connection, guaranteeing confidentiality. CABOLO® One enhances efficiency by digitalising the reporting process, making report creation straightforward with features like annotations and highlighted key points. It supports over 35 languages and translates into more than 60 automatically, all without internet access. It is natively compatible with DANTE, allowing for separate speaker management and accurate identification throughout recordings.
AC-MXNET-1G-DANTE-DV2 provides a stream break-out point to pass Dante
signals to other Dante-enabled devices, such as Dante-capable DSP Matrix amplifiers or self-powered Dante-equipped speakers. The MXnet Evolution II platform provides system designers with flexible endpoint options while simultaneously consolidating wiring paths.
- Dante Ch: 2x2
- 16-bit, 24-bit, 32-bit
AC-MXNET-1G-DANTE-EV2 adds Dante audio encoding capability to the enhanced video quality of MXnet Evolution II, providing system designers with flexible endpoint options while simultaneously consolidating wiring paths.
- Dante Ch: 2x2
- 16-bit, 24-bit, 32-bit
PB9700-SE 4K/KVM over IP Sender is a great 4K video distribution solution for Residential, KVM and Signage deployment, integrating Web-based Aavara AV Master Control Software and 3rd Party Control drivers for centralizing control.
PB9000-RE 4K60Hz 4:4:4 Over IP Receiver is a great 4K video distribution solution for Residential, KVM and Signage deploy, integrating Web-based Aavara AV Master Control Software and 3rd Party Control drivers for centralizing control.
The DAV-02HT and DAV-02HR are state-of-the-art Dante AV Ultra Encoder and Decoder, offering 4K HDR UHD video with subframe latency over 1GbE networks.
The DAV-02HT and DAV-02HR are state-of-the-art Dante AV Ultra Encoder and Decoder, offering 4K HDR UHD video with subframe latency over 1GbE networks.
The Exstreamer M400 feeds your PA and turns it into an extensive Audio over IP system. A wide variety of audio environments, such as Dante ®, SIP, InformaCast and Syn-Apps are supported.
The Exstreamer MPA400 feeds 2 – 8 ohm speakers and turns them into an extensive Audio over IP system. A wide variety of audio environments, such as Dante ®, SIP, InformaCast and Syn-Apps are supported.
- Dante Ch: 2x2
- 16-bit, 24-bit
The IP Former can be attached to any loudspeaker either while in production or in existing installations. It enables audio-streaming over the internet with a reliable, fast-reactive connection, storing capabilities and VoIP/SIP negotiation.
- Dante Ch: 1x0
- AES67 Enabled
IP400 series encoders and decoders provide a flexible, powerful, and scalable solution at resolutions up to 3840 x 2160@60hz 4:4:4. They allow 4k UHD media to be switched and distributed over standard gigabit Ethernet networks, providing complete end-to-end streaming systems.
IP400 series encoders and decoders provide a flexible, powerful, and scalable solution at resolutions up to 3840 x 2160@60hz 4:4:4. They allow 4k UHD media to be switched and distributed over standard gigabit Ethernet networks, providing complete end-to-end streaming systems.
The AMX SVSI NMX-ENC-N2615D-WP is a cost-effective, powerfully robust encoder wallplate. It features a high-quality, low-latency 4K60 4:4:4 MWC codec that is ideal for encoding both live video and detailed content in classrooms, meeting spaces, courtrooms, bars, and other applications.
- Dante Ch: 2x2
- 44.1kHz-96kHz
