The all new iVAM1-1 represents a simple but well featured and competitively priced video and audio monitor. With fast easy and monitoring of audio and video, this unit comes standard with 3G-SDI and Analog inputs. License other signal formats as and when needed, either initially or after purchase.

iVAM1-1 is designed to be easy to operate, providing fast access to either video or meters. The unit comes standard with Analog and 3G-SDI but has options for additional signals, including ST-2110, ST-2022, Dante, Ravenna, AES3, & MADI64. The touch screen front panel makes the unit easy to use, easy to operate, and easy to configure for your particular purpose. Four rotary knobs supplement the touch controls and provide fast and easy access to volume, balance, signal source and channel selection. A front mounted USB port is provided for software updates to support new and emerging technologies. All iAM Series monitors are built with an onboard web server.

Designed primarily for switching between monitoring systems the NMS802 is a Dante enabled PoE Network Monitor Switch with one Dante stereo input, one stereo analogue input, eight Dante stereo outputs and one analogue stereo output. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. There are also two GPI inputs for remote control of cut and dim. The NMS802 has many features that may be programmed via its web page including key colours, delay time, input and output gains and remote control of functions. For convenience of adjustment the delay time may also be set using just the front panel controls as well as via the web page. The unit includes a redundant network connection which may alternatively be used as a network switch output. The Dante Left and Right inputs are mirrored on the rear of the NMS802 as balanced XLR analogue inputs. One of the outputs may be selected as analogue available on the rear.
The unit may be powered by mains or PoE or both.

In a world that seems to be gradually moving towards working and mixing 'in the box', there are still situations where hands-on control is second to none.

Monitor control is one of those cases. Enter MOM - our Monitor Operating Module.

MOM is the perfect, tactile match for one or more AVID MTRX, AVID MTRX Studio, AX32, DX32, Penta 720, and Penta 721s units equipped with the PRO|MON|3 monitor control license. The MOM is a remote control, connected via Ethernet, and no audio is actually passing through the unit. The audio-routing magic happens within the AX32 or DX32R and is set up via the DADman software. But once you connect the MOM, the magic now resides right at your fingertips. Main Features:
MOM will give you everything you would expect from a first-grade hardware monitor-controller:

Large Top-Quailty Rotary Knob
Switching Between Different Sources
Switching Between Different Monitor Configurations (from Mono to Atmos)
Mute/Solo Individual Monitor Channels
Talkback
Dim
Cut
Reference Level

The AM-3825 audio monitor separates the audio signal (embedded audio) superimposed on each SDI signal of 12G, 6G, 3G, HD, and SD from the video signal, and monitors the audio using the built-in speaker or headphones.

It features AES, MADI, Dante (ST 2110-30 compatible), analog and abundant audio input / output interfaces.

Features

● Supports a wide variety of video formats
● Equipped with abundant audio input / output interfaces
● Loudness measurement function
● Simultaneous monitoring of up to 32 channels of audio is possible
● L / R speaker is standard equipment
● LCD display with excellent visibility
● Preset Functions
● User button function
● Downmix function
● Control function by GPIO remote controller
● Alarm output function to external devices
● Space-saving housing
● Compatible with AC power supply

The PRF75D is an active headphone amplifier, because of its design this active headphone amplifier is very easily integrable under the studio furniture, without making cuts on the board.

- Communication is provided by an RJ45 network cable, with both audio information and power (PoE)

- The PRF75 D manages 5 DANTE audio channels as input:

• The left channel for the headphone amplifier
• The right channel for the headphone amplifier
• The left channel for audio monitor output
• The right channel for audio monitor output
• The Talkback channel for talkbacks to headphones

- PRF75D is equipped with DANTE Primary port and DANTE Secondary port (Back up).

- The headphone output can be done on the front panel as well as on the rear panel for a possible deporting of the headphones.

- Monitor output allows you to connect a pair of monitor active speakers

The PCS310 is a built-in headphone amplifier with DANTE connectivity.

Communication is via an RJ45 network cable, carrying both audio information and power (PoE).
The headphone output is on the front panel.
The PCS310 manages 2 DANTE audio channels as input:
• The left channel for the headphone amplifier.
• The right channel for the headphone amplifier.

Applications:
PCS310 is very useful in the "SPEAK" studios as the presenter and his guests need reception headphones.

The SOFIA 567 provides analog, AES3-digital and AoIP-streaming audio outputs. The Web Interface enables remote tuning, streamed audio, station switching, alarms, and more.

Multiple stations can be sequentially monitored using the programmable StationRotation™ feature. The SOFIA 567 includes a built-in BandScanner™, a real-time clock and full SNMP functionality.

Features:

• Fulltime off-air program audio is available simultaneously as L/R-analog, AES3-digital and Dante®-based AES67 AoIP streaming, all with adjustable levels, plus a multi-listener Internet IP stream and front-panel headphone jack.
• Install the SiteStreamer+ within the reception contour of your station and monitor off-air analog FM via the Web from anywhere in the world.
• The SOFIA 567 Internet-listening stream supports up to 10 listeners at once.
• Front-panel alarms and/or rear-panel ‘tallies’ indicate Audio Loss, Low Signal, and AM Reception Loss.
• Easy front-panel setup uses jog-wheel menu navigation and the front-panel readout. The corresponding Web interface offers a detailed presentation and additional options.
• Enhanced alarm logging includes the duration of each alarm, and there is virtually no limit to the number of alarms that can be logged.
• Real-Time Clock has battery backup.
• GPOs may be user-assigned to specific alarm functions.
• The half-rack package features an OLED hi-res graphic display, wide-range LED level meters and individual alarm LEDs with rear-panel tallies.
• SNMP utility is fully supported.
• The built-in BandScanner displays a spectrum plot of the entire AM band (or a user-selected portion).

The SOFIA 565 provides analog, AES3-digital and AoIP-streaming audio outputs. The Web Interface enables remote tuning, streamed audio, station switching, alarms, and more.

Multiple stations can be sequentially monitored using the programmable StationRotation™ feature. The SOFIA 565 includes a built-in BandScanner™, a real-time clock and full SNMP functionality.

Features:

• Fulltime off-air program audio is available simultaneously as L/R-analog, AES3-digital and Dante®-based AES67 AoIP streaming, all with adjustable levels, plus a multi-listener Internet IP stream and front-panel headphone jack.
• Install the SiteStreamer+ within the reception contour of your station and monitor off-air analog FM via the Web from anywhere in the world.
• The SOFIA 565 Internet-listening stream supports up to 10 listeners at once.
• Front-panel alarms and/or rear-panel ‘tallies’ indicate Audio Loss, Low Signal, RDS Errors, and FM Reception Loss.
• Easy front-panel setup uses jog-wheel menu navigation and the front-panel readout. The corresponding Web interface offers a detailed presentation and additional options.
• Gives local and remote readout of all pertinent FM/RDS data.
• Enhanced alarm logging includes the duration of each alarm, and there is virtually no limit to the number of alarms that can be logged.
• The built-in BandScanner displays a spectrum plot of the entire FM band (or a user-selected portion).
• The half-rack package features an OLED hi-res graphic display, wide-range LED level meters and individual alarm LEDs with rear-panel tallies.
• GPOs may be user-assigned to specific alarm functions.
• SNMP utility is fully supported.
• Real-Time Clock has battery backup.

A 1U 19inch rack mounted Dante monitoring and mixing unit, which allows two modes of operation a mixing mode which can mix up to 64 Dante channels at 48kHz (32 channels at 96kHz) plus microphone input (via headphone connector) and AES input to create a 67 into 2 mixer. Alternatively, it can be set into a simple Listen mode where touching a channel instantly routes to the LR output and cancels any previous selection.

The outputs of the LR bus are presented to the user via the inbuilt 4mm x 9mm full range speakers or via the 3.5mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RL64 Dante. The mix output is also routed to the Dante output. The RL64 Dante is operated and controlled via the large letterbox 6.6” diagonal (168mm) 1440 x 240 24-bit colour LCD and capacitive touch panel. A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RL64 Dante very quickly.

The high-resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.

Nixer's PLR64 is specifically designed to allow an operator/commentator to access any two independently selectable sources on the Dante network via a simple remote control panel. Each display shows Channel Name and provides an output meter level. Balanced XLR outputs provide feeds to local speakers or headphones. Perfect for on-air and live applications where critical confidence monitoring is essential

The IS2120P is a Dual Channel 120W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance. The ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W. Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Class D amplifiers. The ISP also features an embedded User Interface which can be accessed from any device supporting an HTML5 compliant web browser.

The IS4250P is a Quad Channel 250W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance. The ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W. Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Class D amplifiers. The ISP also features an embedded User Interface which can be accessed from any device supporting an HTML5 compliant web browser.

The Bella 4 is a 4 loudspeaker confidence monitering rack. it is a new design for 2019 and features the very latest technology in loudspeaker and amplifier design giving it an extended acoustic frequency range (compared to old legacy equivalent products) and low distortion.

PAM1-IP is the only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks. PAM1-IP is the only unit in the world capable of monitoring uncompressed Video and Audio Monitoring for SMPTE 2022-6 and SMPTE 2110 networks. Regardless of the input format the PAM-IP lives up to its PAM name and offers functionality such as loudness measurement, accurate fully configurable metering and multi-channel monitoring as standard with Dolby decoding available as an optional extra.  

In today’s world of network savvy customers, organizations are placing increasing importance on ensuring their critical Network AV systems are available and performing acceptably.

Introducing PacketAV™ Sentinel – Network AV monitoring simplified by Visionary.

Sentinel offers a number of benefits for organizations, improving efficiency by ensuring that time is not wasted waiting for problems to be reported, but is more usefully spent on resolving issues. This proactive approach to Network AV monitoring allows issues to be identified before they impact end users and cause disruptions. This increases system up-time and reliability. As a result, user satisfaction is significantly improved.

Sentinel represents an opportunity for integrators to offer new services, including scalable service programs, and developing sustainable revenue streams.

The Sentinel service uses a local agent to communicate with Network AV devices in the system. It can then interact with local or cloud systems for reporting and logging, as well as API based integrations.

Sentinel is competitively priced and can scale from small, standalone systems to global enterprises.

Specifically designed for use where operators need to create a custom mix from a DANTE stream. With powerful user features accessible via the web UI, the MPA1 Dante is simple to use and flexible enough to meet specific and demanding workflow requirements.

Features

• Fast and intuitive scroll to listen operation of any chosen audio pair.
• ‘Zoom View’ of any audio pair including Audio Phase Metering

The Duet digital wireless monitor system represents a significant step forward for touring performers and other professionals requiring high definition audio in their ears. With 24 bit digital audio, low latency, Dante inputs and a compact, lightweight, diversity bodypack unit, the Duet system should please even the most demanding users, both on and behind the stage.

The new Duet digital wireless monitor system consists of the M2T dual-stereo half-rack transmitter and M2R diversity belt pack receiver. The Duet covers the UHF frequencies of 470-608 MHz (138 MHz) in a single range, uses digital modulation for transmission, and can accept analog or Dante™ digital inputs. The new system can be considered a "wireless IEM" or a deluxe IFB product, designed and developed with professional touring, installation, theater, filmmaking and broadcast customers in mind.

The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full size XLR/TRS combo types for balanced line level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise. A Dante Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can cascade the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.

The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other noisy environments. A high-resolution, color LCD allows for a wide range of menu options, including precise limiter settings, using detailed graphics. The M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells.

The SOFIA 568 provides analog, AES3-digital and AoIP-streaming audio outputs. It collects histograms of signal parameters and dis-plays HD Radio™ album artwork, station logos and similar visuals via the Web interface.

Multiple stations can be sequentially monitored using the programmable StationRotation™ feature. The SOFIA 568 includes a built-in BandScanner™, a real-time clock and full SNMP functionality.

The elite SiteStreamer+™ (‘Plus’) series offers advanced features for the most critical monitoring situations.

SiteStreamers™ also deliver important RF and audio signal measurements and dispatch email or text-message alarms for out-of-limits conditions and other reception errors.

A 2U 19inch rack mounted Dante monitoring and diagnostic unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz).  A 2U 19inch rack mounted Dante monitoring and diagnostic unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz). The signals are presented to the user via the inbuilt 75mm full range speakers which are mounted in optimised ported cabinets for a high quality sound or the via the 6.35mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RD Dante. The RD Dante is operated and controlled via the large 5.0” diagonal (127mm) 24bit colour LCD and capacitive touch panel. A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RD Dante very quickly. The high resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.  Firmware updates of the RD Dante are achieved via a dedicated USB B connector on the front panel. There is also a dedicated 6.35mm jack socket for the headphone output and a 6.35mm jack socket to input a line level source such as an iPod etc.

The Model 792 Central Controller with Model 793 Control Console is a StudioComm for Dante® system designed for supporting high-channel-count, advanced multichannel monitoring applications. The Model 792 Central Controller with Model 793 Control Console is a StudioComm for Dante® system designed for supporting high-channel-count, advanced multichannel monitoring applications. Features include one 16-channel and one stereo Dante digital audio input and one 16-channel balanced analog input. Also includes one 16-channel and one stereo Dante monitor output and one 16-channel balanced analog monitor output. Three configurable Gigabit Ethernet network interfaces; two can be used for transporting audio (Redundant Dante) and the third for accessing the management menu system.

The TouchMonitor TM7 offers a new level of audio metering with a 7" touch screen. The TouchMonitor TM7 offers a new level of audio metering with a 7" touch screen. Now with Dante™ AoIP, including AES67 mode, up to 32 channels of audio and redundant network support.

• TM7 and TM9 with Dante AoIP, including AES67 mode
• Up to 32 channels of audio to be monitored
• Redundant network support

Space-saving For environments where space is an issue, an audio metering unit of the TouchMonitor TM7 series is the ideal choice. Combining the simple and flexible operational concept and GUI of the TM9 with a 7" high-grade touch screen, the TM7 lets you configure the instruments of your choice with ease. Instruments can be scaled, randomly positioned and combined for optimized use of available screen space. The modular software concept lets you purchase exactly the features you actually require.  Different Housings Beside the table-top version of TouchMonitor TM7 an OEM version is available for mounting TM7 into mixing consoles or other front panels. It can also be combined with mounting adpaters for a seamless integration into 19"/3U standard racks or into standard 19" rack-mount cabinets for waveform monitors for video studios. Expanded basic software and instruments The latest firmware version expands the basic software to 4-channel display, 4 x Mono, 2 x Stereo, 2 x Mono and 1 x Stereo can be measured without the need of an activated Multichannel licence. RTA provides a 1/12-octave mode, Cinema Loudness standards (LEQ(M), TASA, SAWA) have been implemented, and the Audio Vectorscope instrument allows up to 4 instances. The output routing can individually be adjusted for each preset, all presets can be exported or imported at the same time. Further details can be found in the Release Notes (included in the update package), or in the data sheet.

The TouchMonitor TM9 offers a new level of audio metering with a 9" touch screen. The TouchMonitor TM9 offers a new level of audio metering with a 9" touch screen. Now with Dante™ AoIP, including AES67 mode, up to 32 channels of audio and redundant network support.

• TM7 and TM9 with Dante AoIP, including AES67 mode
• Up to 32 channels of audio to be monitored
• Redundant network support

The new level The all-new audio metering units of the TouchMonitor range is RTW‘s answer to growing requirements in today‘s production, post-production, and broadcast world. Equipped with high-grade 7“ or 9“ touch screens and an easy-to-use GUI, TouchMonitor enters a new level of professional audio metering in terms of precision, performance, efficiency and flexibility. Simple and flexible The graphical user interface used in the TouchMonitor TM9 is controlled simply by using your finger or a mouse. Instruments can be scaled, randomly positioned and combined in almost every way for optimized use of available screen space. Even multiple instruments of the same type, assigned to different input channels and configurations, can be displayed simultaneously. Plus, a context-sensitive, on-screen help feature supports the user, allowing him to make setup changes with ease.  Expanded basic software and instruments The latest firmware version expands the basic software to 4-channel display, 4 x Mono, 2 x Stereo, 2 x Mono and 1 x Stereo can be measured without the need of an activated Multichannel licence. RTA provides a 1/12-octave mode, Cinema Loudness standards (LEQ(M), TASA, SAWA) have been implemented, and the Audio Vectorscope instrument allows up to 4 instances. The output routing can individually be adjusted for each preset, all presets can be exported or imported at the same time. Further details can be found in the Release Notes (included in the update package), or in the data sheet.

The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. Long Product Description (150 words or less): The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a large volume control. There are two GPI inputs for remote control of cut and dim. The DPM802 has many features that may be programmed via its web page including key colours, delay time, input gains and remote control of functions. For convenience of adjustment the delay time may also be set using just the front panel controls as well as via the web page. The unit includes a redundant network connection which may alternatively be used as a network switch output. The Dante Outputs Left and Right are mirrored on the rear of the DPM802 as balanced XLR analogue outputs for convenient connection to a power amplifier. The two analogue inputs may be assigned to any of the select switches. The unit may be powered by mains or PoE or both.

Designed originally for EVS operators and monitoring stations in outside broadcast trucks, with 20 Dante and 2 analogue inputs it is also a great general purpose monitor for any racks room or studio. Bella 22 is a summing matrix confidence monitor designed for outside broadcast trucks, studios, theatre and professional audio applications. It is perfect for easy and cost effective monitoring of multiple network audio sources, ideal for busy production environments and perfect for monitoring multiple network intercom & programme feeds. The 2 front panel loudspeakers are driven from a DSP to compensate for their size, the result is surprisingly good, with clear crisp vocals and highly intelligible reproduction of wider band audio sources. They are driven from a class D amplifier and have more than sufficient output level for most environments. Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free. Whilst the low cost and long asset life will keep the accountant satisfied.

For audio professionals working in stereo, surround and immersive formats up to 22.2, Grace Design presents the M908. With powerful DSP functionality, the latest generation AD/DA converters, and a highly intuitive control platform, the M908 provides a comprehensive, all in one monitoring solution for a vast array of formats and workflows.

• 24 channel AES3 digital I/O / 16 channel analog outputs
• 16 channel ADAT Lightpipe in / USB 24 channel inputs
• AES3, S/PDIF, and TOSLINK stereo inputs
• Optional Dante™ or DigiLink™ module for an additional 32 channels of I/O
• Optional 8 channel ADC module for 8 or 16 channel analog inputs
• Our latest generation of AD and DA converters
• 4th generation s-Lock pll clocking system for vanishingly low jitter
• High resolution volume control
• Powerful room correction EQ
• Complete bass management capability
• Channel level and delay calibration
• Comprehensive downmix control
• Built in SPL meter and pink noise source
• Powerful and intuitive remote control unit for access to all system controls and calibration
• Dual redundant external power supply
• Reference quality headphone amplifier with cross-feed
• Flexible talkback system with built-in mic on remote control and mic input for external talkback mics
• Up to 8 stereo CUE paths
• 4 General Purpose Input and Output pins for interfacing to external systems

The Synapse DM1 is a Dante™/AES67 Rackmount audio monitor. Features

• Supports easy monitoring of 32 Dante™ channels in standard monitoring mode and 128 subscription based monitoring channels in extended mode
• Transmits local analog audio channels and selected monitor audio channel to Dante™
• Supports Dante™-AES67 Interoperablity Mode
• Easily assignable front panel headphone and integrated speakers for confidence monitoring applications.
• Integrated power supply with optional external supply for applications  requiring redundant power requirements
• Integrated SFP ports for direct connection to fiber for long haul signal extension applications
• SFP Ports can double as switched connections in both redundant and switched operation to minimize the need for external network switches

The VIPEDIA-12 is the heart of ASL’s rack-based Public Address, Voice Alarm and Commercial Audio system. The VIPEDIA-12 is the heart of ASL’s rack-based Public Address, Voice Alarm and Commercial Audio system. With the VIPEDIA-12 you can:

• Directly connect microphones, music players or any external audio sources.
• Load emergency messages into monitored on-board audio storage.
• Combine with our range of V2000 or V400 class-D amplification.
• Interface to your fire or other life-safety system.

The unit takes care of monitoring every part of the system, from microphone to loudspeaker, whilst simultaneously routing high quality audio where it’s needed.