The Smart pi NAM (Network Amplifier Modules) are commercial and industrial amplifiers that can be installed in the field and close to the speaker location, this allows ease of changing audio zoning, sources, priorities and volume for every single speaker within the system. Each NAM has 4 x 12-Watt RMS class D amplifiers, an Ethernet switch with 2 fibre and 2 ethernet ports, and built in DSP (EQ, FIR, delay and gain). The NAM-HP has 4 x 75-Watt RMS class D amplifiers further offering the ability to incorporate TCoil and induction loops into PA systems for the hearing impaired.
The Network Amplifier Modules (NAM) is a high quality, highly versatile amplifier. With 4 versions available, 2 x Indoor Units and 2 x Outdoor Units, there is a NAM for almost any requirement. Outdoor (IP66) units can be installed in the field near the location of the speakers for Railway Stations and other outdoor venues, whilst indoor NAMs can be installed neatly in the ceiling or on a wall inside.
There are two power options available with each standard power NAM having 4 x 12 Watt RMS class D amplifier channels and the High Power (NAM-HP), 4 x 50 Watt RMS class D amplifier channels, both units have an Ethernet switch and built in DSP (EQ, FIR, delay and gain). Each amplifier has an individual Dante input allowing for simple zoning and future changes.
Energy Star Certified, Dante inputs, DDM ready and 2x120 Watt amplifier with Direct Drive Technology delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD1202 is easy to install and operate – even for non-technical personnel. Simply put, the FAD1202 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system. It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.
2 x 240 Watt Commercial Amplifier with Direct Drive Technology, Dante Networking, DDM Ready and Energy Star Certification. Delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD2402 is easy to install and operate – even for non-technical personnel. Simply put, the FAD2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system. It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.
2 x 60 Watt Commercial Amplifier with Direct Drive Technology, Dante Networking, DDM Ready and Energy Star Certification. Delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD602 is easy to install and operate – even for non-technical personnel. Simply put, the FAD602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system. It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.
NPA23-D2 is a 2*300W8Ω class-D amplifier, which configures with 2-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.
◆ Optional 2-channel Dante network audio input
◆ Support Mconsole and app TCON network control
◆ IPS color LCD
◆ Built in DSP digital processor
◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485
◆ Monitor the working state of power amplifier
◆ Call and standby the amplifier by remote
◆ Support balanced XLR input and unbalanced RCA input
◆ Support stereo, bridge, mono, matrix mode, switch by software
◆ Input sensitivity 0dBU / 6dbu setting by software or LCD
◆ Power on state: Power On/Standby
◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω
NPA43-D4 is a 4*300W8Ω class-D amplifier, which configures with 4-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.
◆ Optional 4-channel Dante network audio input
◆ Support Mconsole and app TCON network control
◆ IPS color LCD
◆ Built in DSP digital processor
◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485
◆ Monitor the working state of power amplifier
◆ Call and standby the amplifier by remote
◆ Support balanced XLR input and unbalanced RCA input
◆ Support stereo, bridge, mono, matrix mode,switch by software
◆ Input sensitivity 0dBU / 6dbu setting by software or LCD
◆ Power on state: Power On/Standby
◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω
GPA410_D4 is a 4-channel class-D amplifiers with DSP functions and touch screen display, Integrated with 4 analog and 4 channel AES3 digital input, optional 4 channel Dante input. Each channel can select the signal independently and set the priority to realize the signal redundancy backup function. Power, current, voltage, temperature and impedance of power amplifier can be monitored in real time, and power limit and current and voltage limit can be set freely. Application used in performance and conference.
*support 4 channel *8Ω1000W
*support constant voltage and constant resistance: 8Ω, 4Ω, 100V, 70V
The Connect Series 84D is a 4-channel amplifier with 80 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 84D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.
Then there’s the Cloud…DANTE CONNECT SERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. Register for your free LEA Cloud account at leaprofessional.cloud
The DANTE CONNECT SERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.
The Extron NetPA U 2002 SB is an ENERGY STAR qualified, Dante-enabled audio power amplifier with flexible outputs that can drive 8 ohm, 4 ohm, 70 volt, or 100 volt loads in a half rack, convection cooled, plenum rated enclosure that includes rack mount hardware. The bridgeable outputs can deliver two 200 watt channels into low impedance systems or one 400 watt channel into low or high impedance systems. Onboard audio DSP includes a 6x6 mix matrix, filters, and dynamics. Four mic/line inputs and two line outputs can be utilized as Dante endpoints or as additional inputs to the onboard DSP. System monitoring via the Dante connection includes detailed amplifier status.
The Extron NetPA U 8001 SUB is an ENERGY STAR qualified subwoofer amplifier that delivers 800 watts in a half rack, 1U, plenum rated enclosure. Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. With its integrated DSP for essential processing, frequency range optimized for subwoofers from 20 Hz to 1 kHz, the NetPA U 8001 SUB amplifier is the perfect companion to the Extron SF 10C SUB subwoofer. This powerful combination meets the requirements of complex, decentralized systems with a complete space-saving solution.
The new ELAN® Digital IP-Enabled Multi-Room Audio System featuring Dante® audio networking is the next generation of Multi-Zone Audio. This new intelligent audio system delivers exceptional quality with the flexibility to scale from a single chassis to multiple chassis and up to 64 zones. The comprehensive line includes a Multi-Zone Audio Matrix, Multi-Zone Audio Extender, Multi-Zone Pre-Amp Audio Matrix, Local Audio Source Preamp and a Network Audio Card.
The SMA-4P0808 is a powerful System Amplifier with four analog inputs, two AES3 inputs, two Dante inputs, four outputs (4x800W @ 4 Ohms), 10 PEQ bands per input and output and a frequency range up to 40kHz. The rugged analog input stage accepts input voltages of up to +23dBu thus matching any source on the market today, with an excellent dynamic range of 118dB. Using a switch-mode power supply for clean power supply rails and superior ruggedness, 64-bit digital processing and some of the best converters available on the market today, the SMA-4P0808 offers sound quality that sets standards in professional as well as high-end home audio.
The SMA-4P2408 is a powerful System Amplifier with four analog inputs, two AES3 inputs, two Dante inputs, four outputs (2x2400W + 2x800W @ 4 Ohms), 10 PEQ bands per input and output and a frequency range up to 40kHz. The rugged analog input stage accepts input voltages of up to +23dBu thus matching any source on the market today, with an excellent dynamic range of 118dB. Using a switch-mode power supply for clean power supply rails and superior ruggedness, 64-bit digital processing and some of the best converters available on the market today, the SMA-4P2408 offers sound quality that sets standards in professional as well as high-end home audio.
The SMA-6P2408 is a powerful System Amplifier with four analog inputs, two AES3 inputs, two Dante inputs, six outputs (2x2400W + 4x800W @ 4 Ohms), 10 PEQ bands per input and output and a frequency range up to 40kHz. The rugged analog input stage accepts input voltages of up to +23dBu thus matching any source on the market today, with an excellent dynamic range of 118dB. Using a switch-mode power supply for clean power supply rails and superior ruggedness, 64-bit digital processing and some of the best converters available on the market today, the SMA-6P2408 offers sound quality that sets standards in professional as well as high-end home audio.
PNA-D4 is the latest product in Visionary’s new PacketAV™ line of network AV endpoints. It is a (4/8 ohms) per channel network amplifier with Dante™/AES67 input that is powered via POE+, no external power supply required. It is a robust unit suitable for industrial, commercial and Pro AV installations. The unit is inherently a network device allowing it to deploy easily and enable precise control of your sound. Four independent channels can be sourced using any Dante™ /AES67 audio on the network using Dante™ Controller software or other third party software. This unit is Class D to allow for efficient use of power.
The excellent sound quality and ample output power available from the latest member of the Duecanali range is thanks to Powersoft’s unique approach to Class D amplification, making it well-suited to serving as the main system in any venue where performance is priority.
A fully integrated, state-of-the- art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions, the DSP hardware and ArmoníaPlus software enable compliance with the crucial requirements of sound systems for emergency purposes.
The Duecanali range is able to drive low impedance loads (2/4/8 Ohm) and 70V/100V distributed lines selectable per channel delivering a maximum output power per channel of: 1800 W at 8 Ω; 3200 W at 4 Ω; 4600 W at 2 Ω; 9200 W at 4 Ω bridged; 6400 W at 8 Ω bridged; 4000 W at 100 Volt and 3200 W 70 Volt.
The series is also versatile, providing status feedback via its front panel LED display or a connected PC running ArmoníaPlus software.
In just 1 RU, the Quattrocanali series offers smaller dimensions, lighter weight and the traditionally amazing sound quality and reliability of all Powersoft products.
Quattrocanali Series amplifiers implement a high-efficiency, microprocessor-controlled power supply with built in PFC (Power Factor Correction) that allows flawless worldwide operation with any AC mains voltage in the range 85-275 VAC tolerant to peak up to 400 V. The patented SRM (Smart Rails Management) technology allows to maximise the efficiency of the system and drastically reduce power consumption at any load and usage condition.
The NetSpire™ NAM2i is an intelligent, network enabled amplifier. The device receives network digital audio and provides output to speakers using two integrated 12 watt Class D amplifiers, digital signal processing, and digital voice announcement.
The NetSpire™ NAM2i devices are housed in IP66 rated enclosures suitable for installation in harsh, outdoor, and rolling stock environments, where immunity from dust, water and physical deformation is required.
The NAM2i units integrate seamlessly with the NetSpire system and allow audio zones to be created anywhere a connection to the network is available. Each speaker is connected to an independent audio channel, and can be assigned to separate announcement zones or grouped in the same zone. The NAM2i can be configured to perform a different series of audio processing functions on each of the output channels. The 24bit DSP can perform the following configurable chains of audio processing functions on each channel:
Delay
Gain adjustments
Dynamic Range Compression & Expansion
Power Limiting
Parametric Frequency Equalisation
The NAM2i units also have a single balanced audio input which can be used to connect an Ambient Noise Sensing Microphone (ANC). The microphone is used to measure the ambient noise conditions of zone and adjust the volume of announcements automatically to compensate.
The NAM2i housing is IP66 rated, and encompassess the cable terminations on the NAM2i carrier bracket.
The DAP series are integrated, 4 channel professional amplifiers using Magnetic's unique Class D circuit. Adopted DSP with WIFI, the amplifiers can be used in any kind of professional amplifications.
Features:
High efficient Class D Full band with low distortion 85-265V with PFC Low stand by consumption for green energy Intelligent sleep and wake-up Limiter output by software when overloaded
3 levels of power design meet the needs in the application of different occasions Intelligent cooling system makes power amplifier work quieter Stereo/Parallel/Bridged-mono mode Advanced switch-mode power supply technology for high performance Upgraded cooling fan with magnetic suspension technology and low nosie 2u chassis structure design The class A/B power supply circuit design Soft start function Power Requirements: 220-240V, 50/60HZ
The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply. Dante Audio Amplifier can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.
The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 60W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers. The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP60XXA-1A MAX power 60W, Which build-in AC 100-240V [50/60Hz] power module. Dante Audio Amplifier can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
