Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to six channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touch-screen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features.
Lynx Studio Technology is proud to present the Hilo Reference A/D D/A Converter System. With the pristine, open, transparent audio quality for which Lynx is known, Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to six channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touch-screen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features. Front panel controls support extensive signal routing and mixing, sample rate selection, clock source options, levels, metering and diagnostic features.
The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.
The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs. The unit presents itself to the network as a ten input, two output device but also has ten analogue inputs and two analogue outputs.
All inputs are selectable to either or both of the two internal speakers, line level speaker outputs and headphone socket with individual volume controls, cut buttons and signal input LEDs. The unit includes a secondary port for Dante Redundancy or a switch output. Both ports include network activity LEDs.
The Prehear 4080 covers all those 'listen' feeds required by production. Pre-fade listen feeds of presenters, off air feeds, and all those other bits and pieces that waste talkback matrix inputs can be fed directly to these units with convenient local control.
Each input may be switched to left, right, or both speakers.
Each channel has an audio present (VOX) indicator, a volume control and a cut switch with bright blue illumination.
There is a speaker cut button with red illumination and a stereo headphone socket suitable for stereo or 316 jacks. An indicator illuminates on successful connection to the network.
Both loudspeaker amplifiers have built in limiters to protect the loudspeakers.
All analogue inputs and outputs are on XLR and there are two line level outputs with switching following the left/right/both switches.
Dimensions: 1RU 160mm deep.
The digital mixer DMIX-20 from IMG STAGELINE impresses with an intuitive operating concept of the well thought-out user surface. Due to the compact design, it is also ideally suited for applications on smaller to medium-sized stages and for your home studio. The device quickly impresses musicians, DJs and live sound mixers. Combined with an external router, the DMIX-20 also allows for a convenient operation via iPad using a network connection. The free app can be downloaded from the app store.
The digital mixer DMIX-20 from IMG STAGELINE impresses with an intuitive operating concept of the well thought-out user surface. Due to the compact design, it is also ideally suited for applications on smaller to medium-sized stages and for your home studio. The device quickly impresses musicians, DJs and live sound mixers. Combined with an external router, the DMIX-20 also allows for a convenient operation via iPad using a network connection. The free app can be downloaded from the app store.
The console features 16 mono input channels and 2 stereo input channels as well as +48 V phantom power. The 8 outputs can either be used as 4 aux paths and 4 subgroup paths or as 8 aux outputs. It features 2 integrated DSPs with 12 types of effects, noise gate, compressor/limiter, delay and a 100 mm motor-driven fader.
The colour LCD touch screen facilitates the operation with your settings which can easily be stored due to modern digital technology. Thus, you are able to store the channel's sound adjustments via parametric equalizer, graphical equalizer or use the options of the effect unit. Furthermore, the digital mixer enables you to store 24 overall settings. The full duplex port allows for simultaneous recording and reproduction from a PC or onto a PC. It is also equipped with two headphone outputs.
19-channel digital audio mixer,
with touch screen, 2 DSP effect units and USB interface.
16 mono input channels with assignable controls
8 channel inserts
2 stereo input channels
1 USB audio channel
Full duplex USB port (allows for simultaneous recording and reproduction) for reproduction of digital audio data from a PC and for recording mixings onto a PC
2 integrated DSPs as well as equalizer, noise gate, compressor/limiter and delay
4 aux send outputs and 4 subgroup outputs or 8 aux outputs
6 DCA groups
Control room function
100 mm motor-driven fader
Sampling rate: 24 bits/48 kHz
Settings can be stored
Remote control possible via iPad (connected to external router)
RJ45 network connection for remote control
+48 V phantom power
2 adjustable headphone outputs
17.8 cm colour LCD touch screen (7") for display and settings
Mounting facility for extension modules available at option
482 mm (19") rack installation, 8 RS, with supplied mounting brackets
The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.
The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.
There are still four inputs for the top panel loudspeaker or headphone monitoring, each with their own level controls and each being derived from the Dante network. There are still four talkback outputs each being routed to the Dante network.
Both the inputs and outputs are presented via a single rear panel Neutricon RJ45/CAT5 connection that is Dante/AES67 compliant.
The four talkback outputs are identical. Each has a 3 position lever key talk switch that is either off, locked on, or in a sprung push to talk mode. The output of each circuit can be off unless the talkback button is pressed, looping the the associated Dante input input, or outputting the local cue input.
The local cue input is presented on XLR and has it's own level pot for the speaker or headphone monitoring.
A good quality microphone amplifier with adjustable gain followed by a compressor limiter is built into the unit making its talkback outputs to the Dante network crystal clear. Conversion of the audio signals to/ from the Dante network are by low noise, high bandwidth 48K 24bit converters providing superb performance.
The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.
Inputs
The main input is switchable between mic, mic+48v phantom power, and line. The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones. The input passes through a broadcast quality dsp controlled compressor/limiter circuit prior to the A/D converters to maximize headroom and designed to manage the peaks of excited commentary. The A/D converters are full broadcast spec low noise, 48K 24bit designed for on air use.
Outputs/Talkback
There are two output circuits. One is used as the main programme audio, the other as a talkback circuit. There are separate button controls for each of these using Config+. They can each can be independently configured for latching or momentary, with the programme button also having a 'cough' feature. All talkback I/O connections are via the RJ45/CAT5 Dante network audio connection.
Monitoring
There are two monitoring inputs each with independent level control. Each of these inputs can be switched from the left ear, right ear, or both ears to the stereo headphone amplifier. The headphone amplifier is our high performance intelligent circuit which automatically adjusts its output level for high or low impedance headphones and can also drive mono earpieces and headphones.
There are 2 off 4 LED level meters both indicating -12 to +6 dB. One LED meter is located on the front panel to enable easy visualization of the audio levels if the VITA is being used as a table top device and the other meter is located on the top panel facing the operator when used by its beltclip.
Power
Via PoE on the network connection, or via an external DC power supply.
The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.
The Express ip was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante network audio network.
The Express ip was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante network audio network. This high quality commentary unit is ideal for those looking for cost effective solutions without paying for unwanted features; the Express Box is worthy of investigation.
Inputs
Two front panel mic inputs with selectable 48v phantom power.
Outputs/Talkback
Each mic input has its own individual output. The second mic output can be switched on the rear panel to be a mix of both mic inputs. The two talkback circuits have individual outputs and are common for both commentators.
Monitoring
There are four inputs for external sources, and one sidetone pot of their own voice. These are available independently to each commentator on individual pots, so each can adjust the inputs for their own preference of mix level. There are two 6.35mm headphone sockets – 1 for each commentator. A 7 segment LED PPM meter displays level.
Network
The network connection is AES67/Dante compatible and is available on the rear panel on an RJ45/CAT5 connection. It offers 4 input channels and 4 output channels.
Power
There is an internal switch mode AC power supply, or the Express ip can be powered by PoE if powered by a switch that provides power over Ethernet.
With 20 line-level inputs, 16 microphone preamplifiers and playback engine; processing with 31-band GEQ, compressor, gate, delay, polarity; DSP effects; aux buses; subgroups; sensitive LED metering; load/save/copy mixer setting; remote control, USB in and more, the 20.4 LIVE helps you creating a wonderful show.
With 20 line-level inputs, 16 microphone preamplifiers and playback engine; processing with 31-band GEQ, compressor, gate, delay, polarity; DSP effects; aux buses; subgroups; sensitive LED metering; load/save/copy mixer setting; remote control, USB in and more, the 20.4 LIVE helps you creating a wonderful show.
16 microphone preamplifiers with dedicated trim control
20 line-level inputs
4 Aux sends and 4 subgroups, or 8 Aux sends
2 internal FX
1 stereo main out
All channels Control Room outputs
2 headphones output
USB Stereo recording
100mm precision motor fader
7 inch color LCD touch screen for graphical view and setup
24-bit/48KHz sampling rate
Program, save, load & copy functions
Digital noise gate
Digital compressor/limiter
Digital 4-band full parametric EQ
PAN
Phase reverse
Time delay
6 DCA for Digital Control Audio or MUTE
Lock and unlock function
Change the password
Remote Control: Ethernet or USB
iPad App 20.4i editor for wireless control
Expand socket for option module: Multi-track USB audio recording module or CobraNet module or Dante module etc
Wohler Technologies has been in the business of in-rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise.
Flexible. Adaptable. Future Proof.
iAM-AUDIO is designed to be easy to operate yet powerful enough to provide high quality, intuitive monitoring of multiple signal types within a compact form factor.
iAM-AUDIO is equipped with a variety of metering options and can support Analog, AES3 and MADI inputs with additional options for AoIP formats, including Dante™, Ravenna™ and AES67, 3G/HD/SD-SDI and a growing range of I/O via an SFP interface.
High quality touch screen panels allow for elegant and intuitive control, with simple to navigate menus and configuration. Physical front panel controls provide access to main and auxiliary volume controls, balance control and a front mounting USB port for simple software updates.
All iAM Series monitors are built with an on-board web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration.
With both front mounting speakers and subwoofers, the iAM-AUDIO provides powerful sound output and audio reproduction that adheres to Wohler’s own strict specifications.
iAM-AUDIO can be software upgraded to support new and emerging technologies and is the perfect solution for any application that requires a compact unit for monitoring an evolving range of professional signals.
FEATURES & BENEFITS:
Wohler’s renowned sound quality in 1RU form factor.
Touch screen front panel for intuitive control.
Built-in speakers, headphone jack, USB and Ethernet ports.
A range of connectors, including SFP slots for future I/O.
Store and retrieve presets via USB or remote software control.
Wohler Technologies has been in the business of in-rack monitoring for over 25 years. In fact we invented it! Now with the introduction of the iAM Series, Wohler has re-invented this critical piece of broadcast technology for the modern media enterprise.
Flexible. Adaptable. Future Proof.
iAM-AUDIO is designed to be easy to operate yet powerful enough to provide high quality, intuitive monitoring of multiple signal types within a compact form factor.
iAM-AUDIO is equipped with a variety of metering options and can support Analog, AES3 and MADI inputs with additional options for AoIP formats, including Dante™, Ravenna™ and AES67, 3G/HD/SD-SDI and a growing range of I/O via an SFP interface.
High quality touch screen panels allow for elegant and intuitive control, with simple to navigate menus and configuration. Physical front panel controls provide access to main and auxiliary volume controls, balance control and a front mounting USB port for simple software updates.
All iAM Series monitors are built with an on-board web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration.
With both front mounting speakers and subwoofers, the iAM-AUDIO provides powerful sound output and audio reproduction that adheres to Wohler’s own strict specifications.
iAM-AUDIO can be software upgraded to support new and emerging technologies and is the perfect solution for any application that requires a compact unit for monitoring an evolving range of professional signals.
FEATURES & BENEFITS:
Wohler’s renowned sound quality in 1RU form factor.
Touch screen front panel for intuitive control.
Built-in speakers, headphone jack, USB and Ethernet ports.
A range of connectors, including SFP slots for future I/O.
Store and retrieve presets via USB or remote software control.
The DiNET DAN-RX is a 24-bit/96 kHZ digital to analog endpoint that allows users to output audio from a Dante network to stereo systems.
The DiNET DAN-RX is a 24-bit/96 kHZ digital to analog endpoint that allows users to output audio from a Dante network to stereo systems. It is equipped with left and right balanced XLR outputs with a level control that allows for connection to microphone inputs up to +4 dBu line level systems. A local 3.5 mm headphone output is provided to test or monitor audio before connection to a PA system.
The Di-NET DAN-TX stereo direct box is equipped with 1/4-inch, RCA and stereo 3.5mm input jacks, allows users to connect instruments or line level sources directly to networked audio systems using the Dante protocol.
The Di-NET DAN-TX stereo direct box is equipped with 1/4-inch, RCA and stereo 3.5mm input jacks, allows users to connect instruments or line level sources directly to networked audio systems using the Dante protocol. The DAN-TX has 24-bit/96 kHz analog to digital conversion, and a local 3.5mm headphone output provides the means to quickly test audio.
The RedNet AM2 is a compact stereo monitoring unit combining a high-gain headphone amplifier with line outputs for flexible monitoring of signals from a Dante network.
The RedNet AM2 is a compact stereo monitoring unit combining a high-gain headphone amplifier with line outputs for flexible monitoring of signals from a Dante network. RedNet AM2 features a ¼" front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.
Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.
RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.
Dual locking etherCON connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply.
Key Features
Cost-effective headphone/loudspeaker stereo monitoring solution for Dante offers lower system deployment costs
Superb digital to analogue conversion provides transparent and accurate audio quality
Powerful headphone amp delivers plenty of level even with high-Z headphones for maximum high-quality audibility
Independent headphone/line output level controls for maximum control
Line output mute switch instantly kills the signal to external speakers or power amps
Integrated Gigabit Ethernet switch allows connection of a second device for simpler cabling
Built-in mic stand mount plus non-slip feet – mount RedNet AM2 to a mic stand or place securely on a surface
This product has reached "end-of-line" and is discontinued
High-performance audio input/output unit that utilizes the Dante Audio-over-Ethernet media networking technology. Applications include broadcast "booth kits;" corporate, government, and stadium media rooms; and front-end interface for press feed systems. Four mic/line inputs on front panel with adjustable gain, P48 phantom power, high-pass filtering, and level metering. Four balanced line-level analog outputs on back panel. Flexible headphone monitor section allows single or dual-channel source selection, level meters, and 1/4-inch jacks on the front and back panels. Audio quality is excellent throughout. All audio inputs and outputs feature rugged circuitry for reliable use in field-broadcast environments. Connects to Ethernet network using etherCON protected RJ45 jack. Lightweight aluminum enclosure mounts in one space (1U) of a 19-inch rack and is powered by 100-240 V, 50/60 Hz.
Key Features
Dante audio-over-Ethernet technology
Four mic/line inputs to Dante outputs
Four Dante inputs to balanced line-level outputs
Audio monitoring with meters and headphone output
Excellent audio quality
100-240 V, 50/60 Hz mains powered
Standard connectors, lightweight, 1U rack mounting
The DIO is the Swiss army knife for audio, with an impressive range of tools and converters.
The DIO is the Swiss army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources.
1000 point FIR filters on outputs. (Perfect for PA integration with existing 100/70V systems.)
The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card.
The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card.
The half 1RU interface provides four 1GB Ethernet ports (3 x RJ45 and 1 x SFP), two AES/EBU inputs and outputs, a high quality 32-bit stereo microphone preamp, stereo line input and output capability, a stereo headphone amplifier, and an integrated audio mixer. Power for the NIO 0204 can be powered by either the internal power supply unit or via POE (Power Over Ethernet).
This makes the NIO 0204 an ideal tool for facilities, production, or broadcast providers that employ centralized computing or processing with just the NIO 0204 providing monitoring to loudspeakers or headphones alongside the computer.
Microphones for voiceover, continuity, or commentary can be connected to the NIO 0204’s high quality 32-bit mic inputs, with the remaining analog and digital I/O’s connecting to other local sources such as portable or installed media players for local audition or ingest to the central system via the return Dante connection.
The simplicity of installation and configuration reduces the installation costs of the NIO 0204 and gives considerably greater flexibility to the use of an operational area or the choice of location where tasks can be easily carried out.
KLANG:vier supports individual 3D in-ear mixes for 4 musicians. You can plug in your 1/4'' headphone jacks during rehearsal or use the DB-25 break-out interfaces for your radio transmitters on stage.
KLANG:vier supports individual 3D in-ear mixes for 4 musicians. You can plug in your 1/4'' headphone jacks during rehearsal or use the DB-25 break-out interfaces for your radio transmitters on stage. Musicians can also benefit from the high-end headphone amps if they use a hardwired in-ear setup. Easily extend your KLANG:fabrik system for more musicians and control all KLANG:fabrik and KLANG:vier mixes within the KLANG:app.
KLANG:quelle is a 4 output Dante™ headphone amp that integrates 2 devices in 1 - the combination of a valuable Dante™ enabled digital-analog converter and the professional 4-channel headphone amp.
KLANG:quelle is a 4 output Dante™ headphone amp that integrates 2 devices in 1 - the combination of a valuable Dante™ enabled digital-analog converter and the professional 4-channel headphone amp. The low output impedance makes it perfect for in-ears and guarantees a crystal clear sound. KLANG:quelle is delivered with either a stabilizing plug adapter or a network cable, which is enabled over Power over Ethernet (PoE). The compact case and light weight make it very attractive for musicians and it can be used in the studio or rehearsal room as an extension for the KLANG:fabrik.
The Glensound Inferno is acommentary system for a single user or a large multi-commentator system. Connections use audio network cabling, either directly to the GSI-Dark88 break out box, or across a structured network. The Dante audio protocol is used to transport the audio, making the system flexible an dprogrammable as part of a larger Dante system.
Single mic/line/48v input with compressor/limiter
Headphone mixer has 7 inputs supplied from the Dante network, plus the local input (sidetone)
Each headphone input has left/both/right headphone switching
7 talkback circuits are programmable via the Dante network
he OnAir 1500 – a 12-channel, 6-fader console (expandable to 12 faders), is designed as a flexible hybrid solution for radio broadcasting and production.
The OnAir 1500 – a 12-channel, 6-fader console (expandable to 12 faders), is designed as a flexible hybrid solution for radio broadcasting and production. It’s ideal for studios needing an additional professional grade fader unit and additional I/O or a compact and cost effective mixing console for a production room or studio. Integrated USB playback and record functions make the OnAir 1500 a very compact yet complete mixer.
12-channel, 6-fader console with Studer NANO SCORE DSP and I/O Engine, 100 mm faders
6-fader add-on expansion module, 100mm faders
Super slim design for ergonomic table top installation
Flush-mount and 19" rack-mount options available
Full channel processing, including four-band EQ, compressor, limiter, expander, gate and de-esser
Comprehensive monitoring and talkback with unique headphone split mode and internal speaker
OLEDs (Organic LED) in fader strips and central module provide clearest displays.
Ergonomic, easy-to-learn Touch 'n' Action™ user interface.
USB jingle playback and bus recording facilities
I/O Expansion through standard Studer D21m card slots
Complete integration with Radio Automation Systems, Studer's Call Management System, and RELINK our I/O sharing technology
Advanced timer functionality
USB user identifier for easy user rights assignment
With simple point-to-point connectivity, the OnAir 1500 can be easily moved around as a backup or secondary unit, with a recommended maximum distance of 60 m away from its core when connected via high-quality Cat5 cabling.
Flexibility is increased with addition of the 6-fader extension bay, creating either a 12 fader surface, or 6 faders can be remotely placed in a producer's bay or used as a redundant surface. The system can bridge the gap between on-air and production needs, offering an all inclusive design of features and function to improve ease and efficiency of executing great programming in either setting, all of the time.
The tm stagetec systems DIO is the army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante™ audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources!
1000 point FIR filters on outputs. (perfect for PA integration with existing 100/70V systems)
The SSL Network I/O: MADI-Bridge is a broadcast specification bridge between the industry standard MADI audio format and IP audio networks using Dante. The MADI-Bridge enables any standard MADI device to connect to Dante based IP Audio networks with full redundancy maintained.
Standard Broadcast Specification MADI to IP Audio Network Interface
The SSL Network I/O: MADI-Bridge is a broadcast specification bridge between the industry standard MADI audio format and IP audio networks using Dante.
MADI-Bridge can carry up to 64 channels per Bridge (@ 48kHz). Redundant PSU, MADI ports and IP Network ports mean the Bridge is built for uninterrupted operation. In addition to the inbuilt clock redundancy options in Dante controller, the MADI-Bridge also includes a pair of redundant sync inputs for use with black and burst video, tri-level and word clock sync sources. A front panel headphone socket (with rotary level control) provides inbuilt headphone monitor routing, to replace traditional patch bay fault finding functionality with equivalents in the IP Audio domain. 32bit MADI control tunnelling allows a pair of MADI-Bridges to be used to pass audio and user bits of a whole MADI stream across a network.
The Model 5202 Interface is a general-purpose audio device that supports applications utilizing the Dante® Audio-over-Ethernet media networking technology. Two Dante-associated audio channels can be assigned to the Model 5202 which provides headphone and balanced line-level outputs. The audio quality is such that virtually any audio application can be supported, from simple headphone or loudspeaker monitoring to interfacing with high-performance on-air broadcast, stadium AV, or corporate audio systems. Multi-step LED meters provide confirmation of the level of the two input audio channels. The compact, lightweight design allows the Model 5202 to be used in portable or desktop situations or deployed as a permanent solution in fixed applications. Standard connectors ensure fast, reliable deployment. The unit requires only an Ethernet connection to supply both the data interface as well as Power-over-Ethernet (PoE) power.
Key Features
The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network.
The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network.
NETBOX 4MH interface also includes 4 General Purpose inputs and outputs (GPIO) as interfaces for signaling transport between the different devices in the IP network. As a complementary feature, the unit is soporting the same inputs and outputs as analogue balanced line Inputs and Outputs.
Further, the new interface has additional GPIOs that can be used in for example a studio installation and as an interface to signaling terminals such as the AEQ SRC 03. This greatly facilitates the implementation of services such as remote CUE and Cough-cut, User keys, ON AIR and READY lights, etc.
Technical specifications
Channels: 4 microphone-line input, 4 line outputs, in parallel with 4 stereo headphone outputs. Mute and gain control between +12 and -30 dB, individually or in stereo pairs.
48V Phantom Power supply and electronic balancing for all microphone inputs.
Data format: DANTE Audio-over-IP technology.
Scalable and flexible network topology supporting a wide range of audio transmitters and receivers.
Supports 100Mbps, 1 Gbps and 10 Gbps network segments.
2 x RJ45, 100 BASE-T Ethernet ports with galvanic isolation, usable as “daisy chain” connections.
This product has reached end of life. Please refer to dLive C1500.The iLive-R72 provides an ultra-compact rack mountable solution with fixed format I/O. It features a backlit TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.
This product has reached end of life. Please refer to dLive S3000.The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-80 allows a variety of audio I/O modules, network formats and redundant power supply options, and can be shipped in a touring flight case.
This product has reached end of life. Please refer to dLive C2500.TheÊiLive-T80 provides all iLive functionality in a cost-effective, light weight chassis with fixed format I/O. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback.
This product has reached end of life. Please refer to dLive S5000.The Surface is simply a controller for the MixRack. It also has an audio rack built into it to conveniently provide local inputs and outputs at the mix position. It features a large analogue style, one control per function processing block, TouchScreen, name and colour virtual Ôwrite-on' strip, banks of motorised faders with independent layers, SoftKeys, built-in headphones, local monitor and talkback. The modular iLive-112 allows a variety of audio I/O modules, network formats and redundant power supply options, and is shipped in a touring flight case.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
