Cart
← Back to Product Catalog

DELEC – unito DIO

I/O Interfaces

More details

Similar Products

glensound-AOIP44-AES3_1200px_0
  • Glensound

Glensound – AoIP44 AES3

Housed in a very strong, lightweight aluminium chassis the AoIP22 AES3 units provide solid reliable problem free interfacing of balanced AES3 digital circuits to/ from your Dante network.  Housed in a very strong, lightweight aluminium chassis the AoIP22 AES3 units provide solid reliable problem free interfacing of balanced AES3 digital circuits to/ from your Dante network. Being PoE powered makes the devices very easy to connect to your infrastructure. Input sample rates are up to 192k and output sample rates can be up to 96k.
    I/O Interfaces
See the product
a164dwall
  • DiGiCo

DiGiCo – A164D Wall LCD

The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.

    I/O Interfaces
See the product
fp-nml2vp_400px
  • RDL

RDL – FP-NML2VP

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.
    I/O Interfaces
See the product