Dante-enabled Product Catalog

The Pan Beam PB 16 is a slim line speaker in an appealing design. The Pan Beam PB 16 can generate four independent beams, to get an optimal sound coverage on the listing area. The Pan Beam PB 16 is a slim line speaker in an appealing design. The Pan Beam PB 16 can generate four independent beams, to get an optimal sound coverage on the listing area. It is possible to modify the beam through various optimizers (max SPL, SPL + min side lobes, min side lobes). Operated via a user friendly Windows Software, the connection to the computer is made through a RS 485 network. Over the digital signal processing the vertical and the inclination angle, the volume, sound and delay can be entered and controlled. The Pan Beam PB 16 is equipped with 16 specially-designed 3.5“ chassis, DSP modules and 16 digital amplifiers offering maxi- mum performance of 80 watts per channel. A single Pan Beam PB 16 can cover a listening area of 35 meters, with constant speech intelligibility and sound pressure.

The PB S-208 is an active subwoofer incl. DSP and network functionality. The PB S-208 is the low extension of the Pan Beam family. It is characterized by an unobtrusive design and a genuine and deep bass response. The PB S-208 can be operated in various cardioid applications. The PB S-208 is an active subwoofer incl. DSP and network functionality. The PB S-208 is the low extension of the Pan Beam family. It is characterized by an unobtrusive design and a genuine and deep bass response. The PB S-208 can be operated in various cardioid applications. Operated via a user friendly Windows software, the connec- tion to the computer occurs over an RS 485 network. With the help of digital signal processing, the sound and the delay time can be entered and controlled. The PB S-208 is equipped with two 8" HQ-Drivers and a digi- tal amplifier. The total amplifier power is 600 Watts (800 Watt peak) with a power consumption of 20 VA (normal) or 800VA (max).

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone.  The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in two versions, a 1x100W 70/100V and a 2x100W 70/100V and two factory installed input options that include analog and Dante™. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allows for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won't find a more cost effective way to bring outstanding sound quality to zone on the market today.

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in two versions, a 1x100W 70/100V and a 2x100W 70/100V and two factory installed input options that include analog and Dante™. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allows for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won't find a more cost effective way to bring outstanding sound quality to zone on the market today.

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone.  The DSP100-2-LZ comes in a 2x100W/50W @ 4/8 Ohm version with two factory installed input options that include analog and Dante™. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allows for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won't find a more cost effective way to bring outstanding sound quality to zone on the market today.

The FLX (pronounced FLEX) Platform is the most versatile 1/2 rack amplifier Stewart has ever produced. The FLX (pronounced FLEX) Platform is the most versatile 1/2 rack amplifier Stewart has ever produced. This compact package contains over 300 watts of power output in various channel configurations and impedances. At the heart of the platform is a robust, internal full function DSP that is designed to solve a multitude of your audio problems in just one box. The channel count varies from 1-4 channels and the DSP allows further configuration via routing, EQ, Filters, limiters and much more. A USB port makes programming simple, fast and repeatable for large installations. The RVC and RS232 control allow volume control from a wide range of devices. In addition, the FLX platform has an optional factory installed Dante™ card with 2 channels of networked audio. You won't find a more flexible combination of power output and processing in a comparable package on the market today.

The Roland V-1200HD Multi-Format Video Switcher is a 2 M/E switcher featuring a new 4:2:2 / 4:4:4 Hybrid Engine that combines the features of a production switcher with the power of a presentation switcher.  Hybrid engine 2 M/E switcher and processor for broadcast and live events. The Roland V-1200HD Multi-Format Video Switcher is a 2 M/E switcher featuring a new 4:2:2 / 4:4:4 Hybrid Engine that combines the features of a production switcher with the power of a presentation switcher. Multiple M/E configurations can be selected from 1 M/E, 1.5 M/E and 2 M/E to meet the needs of your production. Inputs include 10 3G SDI and 4 HDMI with 6 3G-SDI Outputs and 2 HDMI outputs. Scalers on HDMI inputs 3 & 4 and HDMI outputs support SD, HD and VESA resolutions. Switch using the V-1200HDR Control Surface or free downloadable Remote Control Software (RCS). The video inputs and the powerful built-in 16-channel audio mixer can be expanded with XI-Series video and audio expansion cards. An intuitive user interface with assignable cross-points and on screen names ensures maximum flexibility for and live production or broadcast.

The audio matrices IDEA developed and manufactured by Mandozzi Elettronica SA are ideal for all customers who are looking for systems that perform more than just simple X/Y connections, but intelligent switching functions and audio signal processing. They are designed to be used as main central matrix of a radio house, or to serve a large number of mixers. IDEA is a fully digital audio routing switcher that offers a great number of various audio input and output interface module types. Input signals with any format (analogue, digital, 2 Mbps, IP, MADI, ATM, Gigabit) are converted to the internal standard of the routing switcher (48 kHz, 32 bit, according to AES/EBU), and the output signals can be presented to the customer in any format he required.  

The new Dante Module provides up to 4 network ports with 64 mono channels each. Therefore one module can handle up to 256 audio signals. The module offers redundant network ports for maximum reliability. In the latest software version Dante TM also supports AES67 connections in order to guarantee the compatibility with a wider range of other 3rd party products. The new board can be implemented in all existing IDEA systems easily. It is compatible with multichannel modules like MADI or GIGM concentrator interfaces.

• Up to 256 audio signals
• Redundant CAT5 connections
• Totally integrated into the IDEA intelligent matrices system

The nXe8004bd is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp4002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp4004d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp8002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp8004d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXe8002bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB 4n features MediaMatrix®'s Scalable I/O Architecture, with support for the popular line of MediaMatrix I/O modules (up to four modules configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation, IxO). All inputs can be configured in groups of four channels for microphone or line level in any of the available configurations. The CAB 4n features a versatile, performance-oriented GPIO port, which provides configurable contacts for analog, digital and dry contact use. All of the GPIO ports are configurable from the NWare™ software and include an easy DIN rail mounting system for efficient rack wiring and service.

• Four 16-position front panel rotary switches for unit ID
• Front panel level meter for each channel
• 24-bit quantization 64x oversampling
• 48kHz sample-rate
• 8 Configurable GPIO pins
• 4 "Form C" relays with NO and NC connections, contacts rated for 1A
• Fault relay for hardware indication of unit status, NO and NC connections, contacts rated for 1A
• Universal power supply (100-240V 50-60Hz)
• Scalable I/O Architecture
• Configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation
• Inputs configurable in groups of four channels for microphone or line-level input and line-level output
• GPIO port
• GPIO-25 DIN rail breakout panel for external control terminations
• Fan cooled 2U package with NION cosmetics
• Front panel audio metering
• Front panel network status and fault indicators

The MMA-10G-HUB is the latest product addition to Evertz’ MMA-10G Network based AV distribution series. The MMA10G-HUB is an in room audio and video switcher that leverages Evertz’ SDVN Software Defined Video Networking technology. The MMA-10G-HUB is the latest product addition to Evertz’ MMA-10G Network based AV distribution series.  The MMA10G-HUB is an in room audio and video switcher that leverages Evertz’ SDVN Software Defined Video Networking technology. Evertz’ MMA10G-HUB is a powerful HDMI router with 10GE extension ports enabling local routing to converge within the larger facility.  The HUB can easily connect a single room to a facility, thereby unleashing a world of possibilities for collaboration, resource sharing and connectivity. By offering multiple HDMI, SDI and audio inputs and outputs with Dante option in a compact 2RU form factor, the HUB can solve all in room switching requirements.

The nXe1.52bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The nXe1.54bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The nXe4002bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit is Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The nXe4004bd unit is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 602/603 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for either indoor or outdoor use, the NAM 602/603 carries an IP66 rating that ensures solid performance under the most challenging conditions. This unit incorporates dual 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, AES/EBU input and output capability, plus a microphone input. Like the NAM 203, this higher capacity model also provides Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. Also noteworthy, the NAM 603 offers redundant audio sources for power amp inputs when used in combination with other DELEC Dante enabled products.

• Direct monitoring in Dante audio networks
• Integrated power amplification
• Simple configuration via web interface

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 602/603 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for either indoor or outdoor use, the NAM 602/603 carries an IP66 rating that ensures solid performance under the most challenging conditions. This unit incorporates dual 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, AES/EBU input and output capability, plus a microphone input. Like the NAM 203, this higher capacity model also provides Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. Also noteworthy, the NAM 603 offers redundant audio sources for power amp inputs when used in combination with other DELEC Dante enabled products.

• Direct monitoring in Dante audio networks
• Integrated power amplification
• Simple configuration via web interface

The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624.  These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.

The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624. These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.

The DIO is the Swiss army knife for audio, with an impressive range of tools and converters. The DIO is the Swiss army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources.

• 1000 point FIR filters on outputs. (Perfect for PA integration with existing 100/70V systems.)
• Customized DSP options
• Native Delec communication panel integration

The unito NIO 0800 provides bidirectional format conversion of AES/EBU audio to and from Dante. The NIO 0800 offers 8 AES inputs and outputs and uses RJ45 for high density, easy to use connections. The unito NIO 0800 provides bidirectional format conversion of AES/EBU audio to and from Dante. The NIO 0800 offers 8 AES inputs and outputs and uses RJ45 for high density, easy to use connections. DELEC unito devices are easy to configure via a web browser and configurations may be stored, imported and exported—reducing setup time for large installations. All the unito products include two Ethernet ports to allow redundant network infrastructure or daisy-chain wiring to reduce the cost of installation while their compact design makes them equally space efficient.