Dante-enabled Product Catalog

AVDT-BOB-ADE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs, two analog line outputs, one stereo AES/EBU input, one AES/EBU output and four GPIOs on terminal block connectors. AVDT-BOB-ADE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs, two analog line outputs, one stereo AES/EBU input, one stereo AES/EBU output and four GPIOs on terminal block connectors. Embedded DSP allows for full mixing of the four Dante inputs/outputs, the two analog inputs/outputs and the four AES/EBU inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Four analog/digital GPIOs allows for hardware remote control of the device (e.g. volume control via potentiometer). Two Gigabit switched ports allows for daisy-chained connection without any bandwidth bottleneck. One port provides Power-Over-Ethernet for direct power supply. The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

AVDT-BOB-ADX8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on XLR connectors, plus stereo AES/EBU input/outputs and four GPIOs on DB25 connector. AVDT-BOB-ADX8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on XLR connectors, plus stereo AES/EBU input/outputs and four GPIOs on DB25 connector. Embedded DSP allows for full mixing of the four Dante inputs/outputs, the two analog inputs/outputs and the four AES/EBU inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Four analog/digital GPIOs allows for hardware remote control of the device (e.g. volume control via potentiometer). Three Gigabit switched ports allows for daisy-chained/star connection without any bandwidth bottleneck. Neutrik port provides Power-Over-Ethernet for direct power supply. SFP ports accept multi-mode or single-mode fibers, allowing to link devices on distances up to 20km. The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers. The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.

The IPD4-CM52-BGM is a 5.25-inch in-ceiling Dante speaker that includes connection for up to three additional non-Dante SoundTube speakers. The IPD4-CM52-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM52-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.

The IPD-SM500i-II is a 5.25-inch coaxial surface-mount speaker with BroadBeam waveguide technology, biamplified. The IPD-SM500i-II incorporates a 5.25-inch (133 mm) polypropylene woofer and 1-inch (25 mm) convex titanium tweeter, with SoundTube's patented BroadBeam waveguide technology for broad, even dispersion of high frequencies. The speaker enclosure is constructed of injection-molded, glass-reinforced ABS with a powder-coated aluminum grille and features SoundTube's proprietary Stealth mounting system that allows for tool-free horizontal and vertical aiming, while keeping the speaker close to the wall. A safety cable with speaker mounting bolt, Euroblock connector, wall mount bracket and terminal weather boot are included with each speaker. This 40-watt bi-amplified speaker includes DSP and Dante for audio distribution and report-back on speaker condition. 

The IPD-CM82-BGM is a 8-inch (203 mm) in-ceiling speaker with 1-inch (25 mm) silk dome tweeter, ported, with a steel backcan. The IPD-CM82-BGM is an in-ceiling ported speaker for music and paging. It incorporates an 8-inch (203 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker. The IPD-CM82-BGM is UL 60065 and 2043 listed.

The IPD-CM62-BGM is a 6.5-inch (165 mm) in-ceiling speaker with 1-inch (25.4 mm) silk dome tweeter, ported, with a steel backcan. The IPD-CM62-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25.4 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker. The IPD-CM62-BGM is UL 60065 and UL2043 listed.

The IPD-CM52-BGM is a 5.25-inch (134 mm) in-ceiling speaker with 0.75-inch (19 mm) silk dome tweeter, ported, with a shallow steel backcan that allows placement in narrow spaces. The IPD-CM52-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a shallow-depth drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker.

The IPD-CM52-BGM is a 5.25-inch (134 mm) in-ceiling speaker with 0.75-inch (19 mm) silk dome tweeter, ported, with a steel backcan. The IPD-CM52-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker.

The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking.  The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking. Each HDMI input handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, 3D, and high-bitrate 7.1 audio. Support for Dante audio networking allows for interfacing with other Dante enabled equipment over the local area network to send and receive streaming stereo audio on any or all input channels. The analog audio inputs are enabled using the optional Analog Audio Breakout Box, which provides support for balanced or unbalanced stereo line-level signals. Analog Audio Embedding Each HDMI input on the DMB-4K-I-HD-DNT is accompanied by a balanced analog audio input, allowing stereo analog audio signals to be embedded with the digital video signal. The analog audio inputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602). Dante™ Audio Networking Dante networking enables streamlined integration with Crestron Avia™ DSP products and other Dante enabled audio sources, processors, mixers, and switchers. Dante allows stereo audio input signals to be received over an Ethernet network and embedded with the video input signal from any of the blade’s HDMI inputs. Send/return loop capability is also supported, allowing audio from any HDMI or analog input to be externally processed, mixed, or switched via Dante, and then re-embedded with the video signal within the DM switcher. The Dante network interface is provided via the DM switcher’s LAN port, supporting up to 120 simultaneous stereo input and output signals. CEC Embedded Device Control DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-I-HD-DNT provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking.  The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking. The HDMI outputs are each capable of handling Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, and high-bitrate 7.1 audio. Built-in 4K scaling enables the devices connected to each HDMI output to handle any video resolution from NTSC 480i to 4K DCI. DVI signals are also supported using HDMI-to-DVI adapters or interface cables. Support for Dante audio networking allows for routing of stereo audio output signals to other Dante enabled equipment over the local area network. The analog audio outputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602), which provides support for balanced or unbalanced stereo line-level signals. 4K/60 Scalers An independent, high-performance 4K scaler is provided at each output to ensure that input sources of any resolution or frame rate can be routed and displayed reliably on virtually any display device without compromising the original input signal. As part of a DM® switcher with many outputs, this allows any video or computer source to be viewed simultaneously on multiple disparate displays, scaling the signal up or down to match the native resolution of each display. No matter what source is selected, or where it’s routed, the DMB-4K-O-HD-DNT helps to ensure an optimal image on every screen. It can take any input resolution from standard definition NTSC 480i to ultra high-definition 4K DCI, and scale it beautifully to any output resolution up to 4K DCI (4096 x 2160 @ 60 Hz). Interlaced sources are converted to progressive scan using motion-adaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. 3D signals are converted to 2D. Fully automatic operation eliminates any complicated setup by utilizing the displays’ EDID to configure each scaler. Video Wall Processing The DMB-4K-O-HD-DNT has another trick up its sleeve, providing zoom capability and bezel compensation on each output to display just a portion of the source image. Using this feature, up to eight output cards may be combined to provide processing for a video wall composed of up to 64 individual displays. Video wall configurations up to eight wide by up to eight high are supported. Analog Audio De-Embedding Each HDMI output on the DMB-4K-O-HD-DNT is accompanied by a balanced analog audio output, allowing stereo audio signals to be extracted from the digital output and fed to a sound system. The analog audio outputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602). Dante™ Audio Networking Dante networking enables streamlined integration with Crestron Avia™ DSP products and other Dante enabled audio processors, amplifiers, mixers, and switchers. Dante allows stereo audio signals from any or all of the blade’s outputs to be routed to such equipment over an Ethernet network. Send/return loop capability is also supported, allowing audio from any input source to be externally processed, mixed, or switched via Dante, and then re-embedded with the video signal at any of the HDMI outputs. The Dante network interface is provided via the DM switcher’s LAN port, supporting up to 120 simultaneous stereo input and output signals. CEC Embedded Device Control DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-O-HD-DNT provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced. The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced. The unit is completely configurable: each input can be assigned to any output with various crossover filters (Butterworth, Linkwitz-Riley, Bessel), 10 parametric equalisers, compressor/limiter, delay up to 2 seconds (680 metres), polarity, up to 80 presets memory, password protection and PC software control (Windows and Mac OS).

AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. It is high efficiency output, outstanding sound quality, perfect protection function and good electromagnetic compatibility. Able to remotely monitor running status through Dante network including alarm and protection of temperature, voltage, current and volume at abnormal status, and DSP processing as well as receive the network audio signal through the built-in Dante module via a CAT 6 cable. It adopts AC100-240V 50/60Hz universal power supply. 

AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. It is high efficiency output, outstanding sound quality, perfect protection function and good electromagnetic compatibility. Able to remotely monitor running status through Dante network including alarm and protection of temperature, voltage, current and volume at abnormal status, and DSP processing as well as receive the network audio signal through the built-in Dante module via a CAT 6 cable. It adopts AC100-240V 50/60Hz universal power supply. 

AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. AD series networkable active speaker is a full range loudspeaker integrated network audio transmission, class D amplifier bi-amp driving, remote monitoring control and DSP signal processing. It is high efficiency output, outstanding sound quality, perfect protection function and good electromagnetic compatibility. Able to remotely monitor running status through Dante network including alarm and protection of temperature, voltage, current and volume at abnormal status, and DSP processing as well as receive the network audio signal through the built-in Dante module via a CAT 6 cable. It adopts AC100-240V 50/60Hz universal power supply. 

Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo provides unsurpassed processing power and a control surface with displays, touch screens and light-emitting knobs which detail function and status. Apollo utilises Bluefin2, the next generation of Bluefin HDSP, which provides unrivalled resources of up to 1020 channel processing paths, 128 program busses, 96 IFB/Track outputs and 48 auxes. With single and dual fader options, Apollo can squeeze in more faders into a single footprint that any other console, and its integrated router provides total network flexibility. Apollo’s I/O functions are performed by the Hydra2 network, which uses high capacity 8192² cross-point routers and a variety of I/O units.

Dante interface card for Calrec's Hydra2. Dante interface card for Calrec's Hydra2.

Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location.  Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location. Hydra2 does not compromise audio quality, performs with negligible latency and is founded on comprehensive, built-in fault detection and redundancy. Many of the world’s most successful broadcasters rely on Hydra2 infrastructure for live on-air application in both fixed and mobile installations every day. At the heart of Hydra2 is the 8192² Calrec router (4096² on Summa and Artemis Light). Networks become more advanced when multiple routers are connected together to add additional mixing consoles, or to increase the amount of I/O connections available. Routers, mixing consoles and I/O can all be easily connected to the network as and when needed. Hydra2 provides 1-to-n routing; input sources may be routed to any number of destinations in mixed formats, removing the need for external splits, distribution amplifiers and format convertors. Sources can be routed to multiple consoles, to multiple DSP inputs on each console and directly to output destinations all at the same time. I/O units connect to a Hydra2 router via a single Cat5e or fibre link and can carry 512 channels of 24 bit 48KHz audio in each direction simultaneously, along with control and error detection data. Bandwidth between routers can be increased in multiples of 512 channels by adding additional Hydra2 links between them. As with all Calrec products, audio quality and product reliability are our top concerns. All analogue pre-amps and line level paths are designed around our well proven and highly respected circuitry, providing very high headroom with a very low noise floor. Our lossless proprietary network transportation protocol does not compromise the high audio quality and maintains minimal latency.

The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity.  The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity. Bluefin2 gives Artemis Shine 680 channel processing paths, with up to 128 program busses, 64 IFB/Track outputs and 32 auxiliaries. Artemis’ integrated router means all I/O functions can be performed by Hydra2, using the same high capacity cross-point router technology and a variety of I/O units.               

The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity.  The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity. Bluefin2 gives Artemis Beam 340 channel processing paths, with up to 128 program busses, 64 IFB/Track outputs and 32 auxiliaries. Artemis’ integrated router means all I/O functions can be performed by Hydra2, using the same high capacity cross-point router technology and a variety of I/O units.               

The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity.  The twin sister of Apollo in Greek mythology, Artemis is based on the award-winning Apollo platform. Available in three sizes and utilising the same Bluefin2 and Hydra2 technologies, Artemis has an enormous routing and processing capacity. Bluefin2 gives Artemis Light  240 channel processing paths, with up to 128 program busses, 64 IFB/Track outputs and 32 auxiliaries. Artemis Light packs all this into a 4U enclosure. Artemis’ integrated router means all I/O functions can be performed by Hydra2, using the same high capacity cross-point router technology and a variety of I/O units.               

Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Calrec’s elegant Summa console is designed for broadcast professionals who need to produce creative and engrossing broadcast audio easily, but may not require as many resources as Calrec’s Apollo and Artemis consoles. Control is via a 17-inch multitouch screen inspired by familiar tablet technology, with a straightforward interface that uses established finger gestures to navigate the system. Summa’s considered control simplifies even complex workflow tasks, such as creating mix-minus feeds. Bluefin2 technology gives the Summa 128 a pool of 128 channel processing paths, eight groups, four mains, 16 auxes, and 32 tracks. Its Hydra2 router core provides Summa with the same integral router technology as the Apollo and Artemis consoles.

The WP-DN360 is a digital amplifier with high efficiency and high reliability design.  The WP-DN360 is a digital amplifier with high efficiency and high reliability design. 

• WP-DN 360 is 4 ch with maximum output 560 W × 4 (4 Ω load)
• Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
• Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
• Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
• Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
• Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
• Corresponds to EIA rack mount. 
• BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 

• WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
• Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
• Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
• Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
• Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
• Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
• Corresponds to EIA rack mount. 
• BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.

The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation. The WR-DX400 delivers high-quality sound to multipurpose space with expressive power of 32 bit and comfortable operation.

• In addition to analog input 32 ch, AIR microphone (L / R), announcement microphone, talkback are combined and equipped with a total of 36 ch. 
• Equipped with 16 channels of analog output, it can output not only matrix output but also mixing bus. 
• 100 mm motor drive fader is adopted, with a total of 33 loaded. The fader part consists of 2 layers. 
• 96 pattern memory, 8 mute groups plus 16 library memory for equalizer and dynamics respectively. 
• Remote control software for PC that facilitates monitoring of multiple channels and data management for each project is standard attached. 
• It can also support remote control by iPad, simple adjustment on / in the stage is possible. 
• Three expansion slots are installed, and one 8-ch analog input card is included as standard in one. 
• option card (WR-PC001) Dante in mounting TM voice input / output via the audio network (16 input 16 output per 1SLOT) is possible. 

The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX 400.   The WR-DX100 is a separate configuration separating signal processing unit and operation unit. Rack mount mixer suitable for small space and input expansion of DX400.

• Analog input 12 ch (mono microphone / line input x 8, stereo line input x 2), analog output 8 ch. 
• Standard installed PC remote control software that facilitates multi-channel condition monitoring and memory management for each project. 
• It can also support remote control by iPad, simple adjustment on / in the stage is possible. Also equipped with one expansion slot. 
• option card (WR-PC001) of Dante by mounting TM possible voice input / output via the audio network (16 input 16 output).

Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700. Dante card for Panasonic's WR-DX100, WR-DX400, WP-DN360, and WP-DN700.